• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2228-2234
• /
• 2000

Steering of the vehicles on a slippery highway is a difficult task for most passenger car drivers. The steering vehicles on slippery roads tend to slide outward with less lateral forces than on nor mal roads. When the drivers notice that their vehicles on a slippery highway start to depart from the cornering lane, most of them make a sudden steering and/or braking, which in turn may induce spin-out and instability on their vehicles. In this paper, an active steering control method is proposed such that the vehicles in slippery roads are steered as if they are driven on the normal roads. In the proposed method, the estimated lateral forces acting on the steering tires are compared with the reference values and the difference is compensated by the active steering method. A fuzzy logic controller is designed for this purpose and evaluated on a steering Hardware-In-the-Loop Simulation (HILS) system. Steering performance results on the slippery curved and sinus roads demonstrate the effectiveness of the proposed controller. This method can be realized with the steer-by-wire concept and is promising as an active safety technology.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1720-1721
• /
• 2007

This paper presents a Fuzzy+PID control method for a Bridge Inspection Robot(BIR) system. The BIR has been developed with the aim of checking the safety status of a real bridge, gathering accurate data and performing maintenance. The developed robot system is composed of the specially designed car for bridge inspection, the guide rail and the inspection robot. The proposed Fuzzy+PID controllers are used to track speed reference signal of X axis and position reference signal of Z axis. Experimental results verify that the proposed Fuzz+PID control design method can achieve favorable control performance with regard to external disturbance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.203-208
• /
• 1996

This paper consider the control for the vehicle suspension system using electro-rheological damper. The study is performed by using of FLC(Fuzzy Logic Controller). The model used in the simulation is quarter car and the road disturbance is regarded as white noise random process with zero mean. Proposed control technique shows good agreement compared with the result from the conventional on-off/bang-bang type control technique.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.233-237
• /
• 2002

Vehicle Dynamics Control(VDC) has been a breakthrough and become a new terminology for the safety of a driver and improvement of vehicle handling. This paper examines the usefulness of a brake steer system (BSS), which uses differential brake forces for steering intervention in the context of VDC. In order to help the car to turn, a yaw moment can be achieved by altering the left/light and front/rear brake distribution. The steering function achieved through BSS can then be used to control lateral position in an unintended road departure system. A 8-DOF non-linear vehicle model including STI tire model will be validated using the equations of motion of the vehicle, and the non-linear vehicle dynamics. Since Fuzzy logic can consider the nonlinear effect of vehicle modeling, Fuzzy controller is designed to explore BSS feasibility, by modifying the brake distribution through the control of the yaw rate of the vehicle. The control strategies developed will be tested by simulation of a variety of situation; the possibility of VDC using BSS is verified in this paper.

• Smart Structures and Systems
• /
• v.20 no.1
• /
• pp.85-97
• /
• 2017

The aim of this research is to develop a new method to use magnetorheological (MR) damper for vibration control. It is a new way to achieve the MR damper response without the need to have detailed constant parameters estimations. The methodology adopted in designing the control structure in this work is based on the experimental results. In order to investigate and understand the behaviour of an MR damper, an experiment is first conducted. Force-displacement and force-velocity responses with varying current have been established to model the MR damper. The force for upward and downward motions of the damper piston is found to be increasing with current and velocity. In cyclic motion, which is the combination of upward and downward motions of the piston, the force with hysteresis behaviour is seen to be increasing with current. In addition, the energy dissipated is also found to be linear with current. A proportional-integral-derivative (PID) controller, based on the established characteristics for a quarter car suspension model, has been adapted in this study. A fuzzy rule based PID controller (F-PID) is opted to achieve better response for a varying frequency input. The outcome of this study can be used in the modelling of MR damper and applied to control engineering. Moreover, the identified behaviour can help in further development of the MR damper technology.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.4
• /
• pp.73-83
• /
• 2004

With increasing numbers of vehicles on restricted roads, It happens that we have much wasted time and decreased average car speed. This paper proposes a new concept of coordinating green time which controls 10 traffic intersection systems. For instance, if we have a baseball game at 8 pm today, traffic volume toward the baseball game at 8 pm today, franc volume toward the baseball game will be increased 1 hour or 1 hour and 30 minutes before the baseball game. At that time we can not predict optimal green time Even though there have smart electro-sensitive traffic light system. Therefore, in this paper to improve average vehicle speed and reduce average vehicle waiting time, we created optimal green time using fuzzy rules md neural network as a preprocessing. Also, we developed an Intelligent PLC(Programmable Logic Controller) for real time traffic forecasting as a postprocesing about unexpectable conditions. Computer simulation results proved reducing average vehicle waiting time which proposed coordinating green time better than electro-sensitive franc light system does not consider coordinating green time.

• Journal of Korean Society of Transportation
• /
• v.18 no.5
• /
• pp.57-67
• /
• 2000

Two fuzzy travel time estimators for interrupted traffic flow were developed based on field survey data and simulation data 7hat is collected from DETSIM, which is microscopic traffic simulation model that car-following theory is applied. One is FETTOS(Fuzzy Estimator of Travel Time using Occupancy and Spot speed) and the other is FETTOS(Fuzzy Estimator of Travel Speed using Volume and Occupancy). Fuzzy logic controller was applied to the estimators to deal with non-linear relationship between traffic variables and travel time. According to results of simulation and field survey. estimation of travel time can be modeled by using percent occupancy better than any other traffic variables. Detector location from storyline and signal timing Plan of intersection are affected to estimate travel time. With a few findings, the estimator was constructed and its performance was tested for observed travel time data and simulated data. FETTOS which needs signal timing plan and detector location estimates travel time with accurate better than FETSVO does. However. FETSVO has excellent transferability because the estimator needs set of input data only; volume and time mean speed.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2393-2405
• /
• 2015

This paper considers a decentralized multiple faults detection and isolation (FDI) scheme for reconfigurable manipulators. Inspired by their modularization property, a global sliding mode (GSM) based stable adaptive fuzzy decentralized controller is investigated for the system in fault free, while for the system suffering from multiple faults (actuator fault and sensor fault), the decentralized sliding mode observer (DSMO) is employed to detect their occurrence. Hereafter, the time and location of faults can be determined by a fault isolation scheme via a bank of DSMOs. Finally, the effectiveness of the proposed schemes in controlling, detecting and isolating faults is illustrated by the simulations of two 3-DOF reconfigurable manipulators with different configurations successfully.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2335-2342
• /
• 2014

If you want to use the unmanned quad rotor for emergency information provision and information about the traffic situation of real-time and moving information is included in the car to help in emergency vehicle operation of the city and in the distribution future innovation the need to consider to have enough safety of the use of silent quad rotor. Therefore, in this study, the unmanned quad rotor system research of safe landing control from the center for the improvement of safety of unmanned quad rotor system you have a motor of four, has taken a good structural balance system based on the dynamic model and motion considering the nonlinear characteristics, and attempts to proceed via non-linearity and system disturbances, tough Fuzzy controller, and analyzed through a computer simulation result.