• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.487-493
• /
• 2005

Since the destruction of World Trade Center the attention of the United States and the wider international community has focussed upon the need to strengthen security and prevent terrorism This paper suggests an analysis prior to risk factor and structure for anti-terrorism in the korean maritime society. For this, in this paper, maritime terror risk factor was extracted by type and case of terror using brainstorming method. Also, risk factor is structured by FSM method and analyzed for ranking of each risk factor by AHP. At the result, the evaluation of risk factor is especially over maximum factor for related external impact.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1886-1900
• /
• 2018

This paper proposes a confronting feedback control structure and controllers for positive output elementary super lift Luo converters (POESLLCs) working in discontinuous conduction mode (DCM). The POESLLC offers the merits like high voltage transfer gain, good efficiency, and minimized coil current and capacitor voltage ripples. The POESLLC working in DCM holds the value of not having right half pole zero (RHPZ) in their control to output transfer function unlike continuous conduction mode (CCM). Also the DCM bestows superlative dynamic response, eliminates the reverse recovery troubles of diode and retains the stability. The proposed control structure involves two controllers respectively to control the voltage (outer) loop and the current (inner) loop to confront the time-varying ON/OFF characteristics of variable structured systems (VSSs) like POESLLC. This study involves two different combination of feedback controllers viz. the proportional integral controller (PIC) plus sliding mode controller (SMC) and the fuzzy logic controller (FLC) plus SMC. The state space averaging modeling of POESLLC in DCM is reviewed first, then design of PIC, FLC and SMC are detailed. The performance of developed controller combinations is studied at different working states of the POESLLC system by MATLAB-Simulink implementation. Further the experimental corroboration is done through implementation of the developed controllers in PIC 16F877A processor. The prototype uses IRF250 MOSFET, IR2110 driver and UF5408 diodes. The results reassured the proficiency of designed FLC plus SMC combination over its counterpart PIC plus SMC.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.1
• /
• pp.128-135
• /
• 2015

In this study, we develop the very short-term precipitation forecasting model as well as classifier based on polynomial radial basis function neural networks by using AWS(Automatic Weather Station) and KLAPS(Korea Local Analysis and Prediction System) meteorological data. The polynomial-based radial basis function neural networks is designed to realize precipitation forecasting model as well as classifier. The structure of the proposed RBFNNs consists of three modules such as condition, conclusion, and inference phase. The input space of the condition phase is divided by using Fuzzy C-means(FCM) and the local area of the conclusion phase is represented as four types of polynomial functions. The coefficients of connection weights are estimated by weighted least square estimation(WLSE) for modeling as well as least square estimation(LSE) method for classifier. The final output of the inference phase is obtained through fuzzy inference method. The essential parameters of the proposed model and classifier such ad input variable, polynomial order type, the number of rules, and fuzzification coefficient are optimized by means of Particle Swarm Optimization(PSO) and Differential Evolution(DE). The performance of the proposed precipitation forecasting system is evaluated by using KLAPS meteorological data.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.7 no.2
• /
• pp.154-158
• /
• 2007

As the technology developed, the system is being developed as the structure that is adapted to the intelligent environment. Therefore, the existing situation information system couldn't provide satisfactory service to the user as it provides service only by the information which it received from the sensor. This paper analyzed the problems of the existing user intention awareness system and suggested user intention awareness system to provide a stable and efficient service that fits to the intention of the user compensating this. This paper has collected the behavior data based on the scenario of the sequential behavior course of the user that occurs at breakfast time in the kitchen which is the home domain environment thai is closely related to our lives. This scenario course also showed the flow that the goal intentional user intention awareness system acted that it suggested, and showed the sequential course processing the user behavior data by tables and charts.

• IE interfaces
• /
• v.13 no.1
• /
• pp.92-99
• /
• 2000

Conflicts and interruptions caused by resource failures and rush orders require a nonlinear dynamic production management. Generally the PP&C systems used in industry presently do not meet these requirements because of their rigid concepts. Starting with the grasp of the disadvantages of current approaches, this paper presents a control structure that enables system to react to various malfunctions using a planning tolerance concept. Also, production processes are modeled by using Fuzzy-Petri-Net modeling tool in other to handle the complexity of job allocation and the existence of many disparities. On the basis of this model the developed system support the short-term shop control by rule based decision.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.443-447
• /
• 2001

In this paper, a robust sensorless vector control system for induction motors with a speed estimator and an uncertainty observer is presented. At first, the proposed speed estimator is based on the MRAS(Mode Reference Adaptive System) scheme and constructed with a simple fuzzy logic(FL) approach. The structure of the proposed FL estimator is very simple. The input of the FL is the rotor flux error difference between reference and adjustable model, and the output is the estimated incremental rotor speed Secondly, the unmodeled uncertainties such as parametric uncertainties and external load disturbances are modeled by a radial basis function network(RBFN). In the overal speed control system, the control inputs are composed with a norminal control input and a compensated control input, which are from RBFN observer output and the modeling error of the RBFN, repectively. The compensated control input is derived from Lyapunov unction approach. The simulation results are presented to show the validity of the proposed system.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.05a
• /
• pp.127-130
• /
• 2002

본 논문은 수학적으로 모델링하기 어려운 비선형 시스템을 위한 새로운 계층적 규칙 기반 퍼지 시스템 모델링 기법을 제안한다. 제안된 기법은 퍼지 규칙 기반 구조를 상위 규칙 기반과 하위 규칙 기반으로 나누어 계층화 시키는 것이다 계층적 퍼지 규칙을 적용함으로써 퍼지 규칙을 효율적이고 논리적으로 이용할 수 있다. 퍼지 규칙의 효율적, 논리적 사용은 퍼지 시스템의 정확성을 높일 수 있고 구조를 명료화 시킬 수 있다. 유전 알고리즘은 제안된 퍼지 규칙의 파라미터 최적화 과정에 이용된다. 가스로 데이터에 대한 퍼지 모델링 결과를 통해서 제안된 기법의 타당성 및 효용성을 검증하고 타 기법의 결과와 비교한다.

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.159-164
• /
• 2006

In recent, the marine engine of a large size is being realized a lower speed, longer stroke and a small number of cylinders for the energy saving. Consequently the variation of rotational torque became larger than former days because of the longer delay-time in fuel oil injection process and an increased output per cylinder. It was necessary that algorithms have enough robustness to suppress the variation of the delay-time and the parameter perturbation. This paper shows the structure of hybrid F-NFC against the delay-time and the perturbation of engine parameter as modeling uncertainties, and the design of the robust speed controller by hybrid F-NFC for the engine. And, The Parameter values of linear equation are determined by RC-GA for F-NFS. The hybrid F-NFC is combined the F-NFC and PID controller for filling up each.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.4
• /
• pp.477-486
• /
• 2001

Although the ports are actually competing with various strategies, the definition and structural understanding of port competitive power are not known very much. Therefore this study has launched from this fact, and has the objective of obtaining the structural model of the competitive power, and understanding the components of the port competitive power. The following are the results of the study. First, the process began by abstracting the components that composed the port competitive power through recent research, and grouping it by the most core components using the KJ method. Also, by using the FSM(Fuzzy Structural Modeling) method to understand the structure of the grouped components, and the structural model of the port competitive power was able to obtain as the result. Second, when analyzing the obtained structural model, port expenses, main trunk location, port congestion and port facility came out to be the most important component groups, and especially port expenses was the most effective component that effected all the other components overall. Third, the component groups that were relatively less important, effected by most of the other components, and located on the top level of the structure model were the hinterland accessibility, port ownership, customs duties speed, and large ship port entrance possibility etc. Fourth, the results of this study will be able to be used when establishing competing strategies for our country's ports by proposing the relatively important components with the port competitive rower considered.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.3
• /
• pp.232-237
• /
• 2013

The aim of this study is to structuralize a model of the factors determining the quality of nursing care perceived by the director or manager of a long-term care facilities (hospitalization of patients) using FSM(Fuzzy Structural Modeling), employed in structuralizing social systems. The results were as follows: first, quality in the top tier was shown to be connected with job commitment, commitment to the organization, work experience, care skills, knowledge about the elderly, training and education, which are factors in the middle tier; and second, the structure of the middle tier (job commitment, commitment to the organization, work experience, care skills, knowledge about the elderly, training and education) either showed a connection with the lower tier, which includes employment type, job satisfaction, leadership, relationship with users and workplace relationships, or showed a connection among the factors within. These results confirmed the following: first, care skills and knowledge about the elderly, which demonstrate the job expertise of caregivers, showed a connection with service quality based on work experience; second, job commitment in the middle tier was observed to affect various factors in the same tier such as care skills, knowledge about the elderly, training and education amongst others, and it was determined that it is an important determining factor in service quality. Lastly, a meaningful result was shown in relation to leadership. The leadership skills of the director of the facilities had a connection with the care caregivers' commitment to the organization, which had a connection with service quality. This structure showed the kind of role the director must play in order to improve service quality.