• Journal of Electrical Engineering and information Science
• /
• v.3 no.3
• /
• pp.355-365
• /
• 1998

The purposes of this study are to propose a network for the characterizing of the input data and to show how to design predictive neural net재가 expert system which doesn't need previous knowledge base. We derived this network from the radial basis function networks(RBFN), and named it as a statistical EBFN. The proposed network can replace the statistical methods for analyzing dynamic relations between target disease and other parameters in medical studies. We compared statistical RBFN with the probabilistic neural network(PNN) and fuzzy logic(FL). And we testified our method in the diabetes prediction and compared our method with the well-known multilayer perceptron(MLP) neural network one, and showed good performance of our network. At last, we developed the diabetes prediction expert system based on the proposed statistical RBFN without previous knowledge base. Not only the applicability of the characterizing of parameters related to diabetes and construction of the diabetes prediction expert system but also wide applicabilities has the proposed statistical RBFN to other similar problems.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.13 no.4
• /
• pp.315-323
• /
• 2013

Vessel Traffic Service (VTS) is being used at ports and in coastal areas of the world for preventing accidents and improving efficiency of the vessels at sea on the basis of "IMO RESOLUTION A.857 (20) on Guidelines for Vessel Traffic Services". Currently, VTS plays an important role in the prevention of maritime accidents, as ships are required to participate in the system. Ships are diversified and traffic situations in ports and coastal areas have become more complicated than before. The role of VTS operator (VTSO) has been enlarged because of these reasons, and VTSO is required to be clearly aware of maritime situations and take decisions in emergency situations. In this paper, we propose a prediction table to improve the work of VTSO through the Cognitive Work Analysis (CWA), which analyzes the VTS work very systematically. The required data were collected through interviews and observations of 14 VTSOs. The prediction tool supports decision-making in terms of a proactive measure for the prevention of maritime accidents.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.4 no.3
• /
• pp.327-336
• /
• 2004

In distributed autonomous mobile robot system, each robot (predator or prey) must behave by itself according to its states and environments, and if necessary, must cooperate with other robots in order to carry out a given task. Therefore it is essential that each robot have both learning and evolution ability to adapt to dynamic environment. This paper proposes a pursuing system utilizing the artificial life concept where virtual robots emulate social behaviors of animals and insects and realize their group behaviors. Each robot contains sensors to perceive other robots in several directions and decides its behavior based on the information obtained by the sensors. In this paper, a neural network is used for behavior decision controller. The input of the neural network is decided by the existence of other robots and the distance to the other robots. The output determines the directions in which the robot moves. The connection weight values of this neural network are encoded as genes, and the fitness individuals are determined using a genetic algorithm. Here, the fitness values imply how much group behaviors fit adequately to the goal and can express group behaviors. The validity of the system is verified through simulation. Besides, in this paper, we could have observed the robots' emergent behaviors during simulation.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.3
• /
• pp.199-210
• /
• 2012

The recent researches on the automatic berthing control problems have used various kinds of tools as a control method such as expert system, fuzzy logic controllers and artificial neural network (ANN). Among them, ANN has proved to be one of the most effective and attractive options. In a marine context, the berthing maneuver is a complicated procedure in which both human experience and intensive control operations are involved. Nowadays, in most cases of berthing operation, auxiliary devices are used to make the schedule safer and faster but none of above researches has taken into account. In this study, ANN is applied to design the controllers for automatic ship berthing using assistant devices such as bow thruster and tug. Using back-propagation algorithm, we trained ANN with set of teaching data to get a minimal error between output values and desired values of four control outputs including rudder, propeller revolution, bow thruster and tug. Then, computer simulations of automatic berthing were carried out to verify the effectiveness of the system. The results of the simulations showed good performance for the proposed berthing control system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.9 no.4
• /
• pp.249-254
• /
• 2009

The today's decision making tasks in globalized business and manufacturing become more complex, and ill-defined, and typically multiaspect or multi-discipline due to many influencing factors. The requirement of obtaining fast and reliable decision solutions further complicates the task. Intelligent decision support system (DSS) currently exhibit wide spread applications in business and manufacturing because of its ability to treat ill-structuredness and vagueness associated with complex decision making problems. For multi-dimensional decision problems, generally an optimum single DSS can be developed. However, with an increasing number of influencing dimensions, increasing number of their factors and relationships, complexity of such a system exponentially grows. As a result, software development and maintenance of an optimum DSS becomes cumbersome and is often practically unfeasible for real situations. This paper presents a technically feasible approximation of an optimum DSS through decreasing its complexity by a modular structure. It consists of multiple DSSs, each of which contains the homogenous knowledge's, decision making tools and possibly expertise's pertaining to a certain decision making dimension. Simple, efficient and practical integration mechanism is introduced for integrating the individual DSSs within the proposed overall DSS architecture.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.4
• /
• pp.420-425
• /
• 1999

The maximum demand controller is an electrical equipment installed at the consumer side of power system for monitoring the electrical energy consumed during every integrating period and preventing the target maximum demand (MD) being exceeded by disconnecting sheddable loads. By avoiding the peak loads and spreading the energy requirement the controller contributes to maximizing the utility factor of the generator systems. It results in not only saving the energy but also reducing the budget for constructing the natural base facilities by keeping thc number of generating plants ~ninimumT. he conventional MD controllers often bring about the large number of control actions during the every inteyating period and/or undesirable loaddisconnecting operations during the beginning stage of the integrating period. These make the users aviod the MD controllers. In this paper. fuzzy control technique is used to get around the disadvantages of the conventional MD control system. The proposed MD controller consists of the predictor module and the fuzzy MD control module. The proposed forecasting method uses the SOFM neural network model, differently from time series analysis, and thus it has inherent advantages of neural network such as parallel processing, generalization and robustness. The MD fuzzy controller determines the sensitivity of control action based on the time closed to the end of the integrating period and the urgency of the load interrupting action along the predicted demand reaching the target. The experimental results show that the proposed method has more accurate forecastinglcontrol performance than the previous methods.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.3
• /
• pp.119-136
• /
• 2012

The goal of this study is to apply the IPCC(Intergovernmental Panel on Climate Change) concept of vulnerability to climate change and verify the use of a combination of vulnerability index and fuzzy logic to flood vulnerability analysis and mapping in Seoul using GIS. In order to achieve this goal, this study identified indicators influencing floods based on literature review. We include indicators of exposure to climate(daily max rainfall, days of 80mm over), sensitivity(slope, geological, average DEM, impermeability layer, topography and drainage), and adaptive capacity(retarding basin and green-infra). Also, this research used fuzzy model for aggregating indicators, and utilized frequency ratio to decide fuzzy membership values. Results show that the number of days of precipitation above 80mm, the distance from river and impervious surface have comparatively strong influence on flood damage. Furthermore, when precipitation is over 269mm, areas with scare flood mitigation capacities, industrial land use, elevation of 16~20m, within 50m distance from rivers are quite vulnerable to floods. Yeongdeungpo-gu, Yongsan-gu, Mapo-gu include comparatively large vulnerable areas. This study improved previous flood vulnerability assessment methodology by adopting fuzzy model. Also, vulnerability map provides meaningful information for decision makers regarding priority areas for implementing flood mitigation policies.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.75-82
• /
• 2015

This paper presents a new technique for enhancing power quality by reducing harmonics in the neutral conductor. Three-Phase Four-Wire (3P4W) system is commonly used where single and three phase loads are connected to Point of Common Coupling (PCC). Due to unbalance loads, the 3P4W distribution system becomes unbalance and current flows in the neutral conductor. If loads are non-linear, then the harmonic content of current will flow in neutral conductor. The neutral current that may flow towards transformer neutral point is compensated by using a series active filter. In order to reduce the harmonic content, the series active filter is connected in series with the neutral conductor by which neutral and phase current harmonics are reduced significantly. In this paper, solar PV based inverter circuit is proposed for compensating neutral current harmonics. The simulation is carried out in MATLAB/SIMULINK and also an experimental setup is developed to verify the effectiveness of the proposed method.

• Industrial Engineering and Management Systems
• /
• v.12 no.4
• /
• pp.306-316
• /
• 2013

The semiconductor industry has grown rapidly, and subsequently production planning problems have raised many important research issues. The reentrant flow-shop (RFS) scheduling problem with time windows constraint for harddisk devices (HDD) manufacturing is one such problem of the expanded semiconductor industry. The RFS scheduling problem with the objective of minimizing the makespan of jobs is considered. Meeting this objective is directly related to maximizing the system throughput which is the most important of HDD industry requirements. Moreover, most manufacturing systems have to handle the quality of semiconductor material. The time windows constraint in the manufacturing system must then be considered. In this paper, we propose a hybrid genetic algorithm (HGA) for improving chromosomes/offspring by checking and repairing time window constraint and improving offspring by left-shift routines as a local search algorithm to solve effectively the RFS scheduling problem with time windows constraint. Numerical experiments on several problems show that the proposed HGA approach has higher search capability to improve quality of solutions.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.4
• /
• pp.295-299
• /
• 2015

The developed security scheme for user authentication, which uses both a password and the various devices, is always open by malicious user. In order to solve that problem, a keystroke dynamics is introduced. A person's keystroke has a unique pattern. That allows the use of keystroke dynamics to authenticate users. However, it has a problem to authenticate users because it has an accuracy problem. And many people use passwords, for which most of them use a simple word such as "password" or numbers such as "1234." Despite people already perceive that a simple password is not secure enough, they still use simple password because it is easy to use and to remember. And they have to use a secure password that includes special characters such as "#!($^*$)^". In this paper, we propose the automatic fortified password generator system which uses special characters and keystroke feature. At first, the keystroke feature is measured while user key in the password. After that, the feature of user's keystroke is classified. We measure the longest or the shortest interval time as user's keystroke feature. As that result, it is possible to change a simple password to a secure one simply by adding a special character to it according to the classified feature. This system is effective even when the cyber attacker knows the password.