• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.763-768
• /
• 2010

Today the light of mankind since the dawn of mankind and that they were living "lives" on the huge influence across space is a dynamic energy. Because of this, when all human beings with the light and you can feel more comfortable with a stable mind to the beauty and the pursuit of happiness is to have instincts. In this paper, a fuzzy control system using a combination of external environmental factors, respectively, the conversion of quantitative uncertainty information into the LED lighting is designed to express algorithms, available in indoor circadian control circuit was designed and fabricated LED. Factor in the external environment temperature, humidity, and light intensity values to the controller through the sensor to accept these values and the optimal values for lighting the fuzzy control algorithm is converted into human emotion to feel comfortable to express through the dimming control LED lighting.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.2
• /
• pp.172-179
• /
• 2006

This study developed a program for detecting charged refrigerant amount in system air-conditioner. System air-conditioner is an air-conditioning system with multiple indoor units. Due to the complexity of the system, it is more difficult to detect the refrigerant amount charged in the system air-conditioner than in a general single air-conditioner. Experiments were performed for a 6 HP outdoor unit with 3 indoor units in a psychrometric calorimeter. The experimental amount of the charged refrigerant was ranged from $60\%\;to\;140\%\;with\;10\%$ increasement. Fuzzy algorithm was employed for detecting the charged refrigerant amount in the system air-conditioner. The experimental data were used for curve-fitting for the general ranges of indoor and outdoor temperature conditions. Membership function was determined for the whole ranges of experimentally measured data and rule-bases were defined for each charged refrigerant amount. Developed program successfully predicted the measured data within $10\%$ resolution range.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.2
• /
• pp.171-176
• /
• 2002

This paper describes a new automated analysis system for model plane engine. An automatic finite element (FE) mesh generation technique, which is based on the fuzzy knowledge processing and computational geometry technique, is incorporated into the system, together with one of commercial FE analysis codes, ANSYS, and one of commercial solid modelers, Designbase, The system allows a geometry model of concern to be automatically converted to different FE models, depending on physical phenomena of plane engine to be analyzed, i.e. deformation analysis, thermal analysis and so on. The FE models are then automatically analyzed by the FE analysis code. Among a whole process of analysis, the definition of a geometry model, the designation of local node patterns, the assignment of material properties and boundary conditions onto the geometry model are only the interactive processes to be done by a user. The interactive operations can be processed in a few minutes. The other processes which are time consuming and labour-intensive in conventional CAE systems are fully automatically performed in a personal computer environment. The proposed analysis system is successfully applied to evaluate a model plane entwine.

• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.105-111
• /
• 2007

This paper is concerned with fuzzy inference-based optimal sub-bands decision scheme which is to be embedded the watermark. It concentrated not only on design of fuzzy inference algorithm but also on human visual parameters (HVP), such as contrast sensitivity, texture degree. In the first, such human visual parameters as contrast sensitivity, texture degree as well as statistical characteristics are involved to select the optimal coefficients region. Secondly, fuzzy if - then rule which can be able to adapt the wide variety of environments is developed. The performance of proposed approach is evaluated with respect to the imperceptibility and correctness of watermark. According to some experimental results, contrast sensitivity function is superior in smooth image. On the other hand, statistical characteristics provide good results in rough images.

• Steel and Composite Structures
• /
• v.34 no.1
• /
• pp.155-170
• /
• 2020

Different parameters potentially affect the properties of corroded reinforced concrete beams. However, the high number of these parameters and their dependence cause that the effectiveness of the parameters could not be simply identified. In this study, an adaptive neuro-fuzzy inference system (ANFIS) was employed to determine the most influencing parameters on the properties of the corrosion-damaged reinforced concrete beams. 207 ANFIS models were developed to analyze the collected data from 107 reinforced concrete (RC) beams. The impact of 23 input parameters on nine output factors was investigated. The results of the paper showed the order of influence of each input parameter on the outputs and revealed that the input parameters regarding the uncorroded properties of concrete beams are the most influencing factors on the corresponding corroded properties of the beams.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.383-388
• /
• 2003

.Ports are usually designed as a dead en port. With an increasing tendency of ship size, the problems such as maneuvering difficulty, turning basin, tugboat fee, etc. are getting to be pointed out. For solving such problem, the conversion of the idea fro dead end port to one-way through port is encourage. To examine the advantage of one-way through port, a quantitative and systematic analyzing procedure is needed. For this, this paper evaluated the preference on the three way of departture using the fuzzy measure and integral model.

• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.151-158
• /
• 2015

Usually risk assessment is performed for the safety of diverse industries though, many kinds of risks cannot be analyzed effectively by using classical probability models due to lack of experience data and impreciseness of human decision making. For these reasons, fuzzy risk assessment utilizing subjective judgment and experience of skillful experts has been considered as a solution. In this study, to comprehend the relationship between conventional fuzzy theory and human conceptual images on risks, linguistic variables were reviewed with reference to fuzzy membership functions, especially in the Korean language. As interviewees, about a hundred people including students as well as safety engineers voluntarily participated. The research results showed that most people were in favor of adjective expressions decorated with adverbs rather than naive expressions such as "high" or "low", and that directly translated linguistic variables were not appropriate for the Korean people in risk assessment as far. Therefore, with consideration of the selection tendency by the Korean people in linguistic variables, it could be concluded that 5 level expressions would be most favorable for linguistic variables in risk assessments in Korea.

• IE interfaces
• /
• v.24 no.3
• /
• pp.220-230
• /
• 2011

The multi-reservoir operation problem for efficient utilization of water resources involves conflicting objectives, and the problem can be solved by varying weight coefficient on objective functions. Accordingly, decision makers need to choose appropriate weight coefficients balancing the trade-offs among multiple objectives. Although the appropriateness of the weight coefficients may depend on the total amount of water inflow, reservoir operating policy may not be changed to a certain degree for different hydrological conditions on inflow. Therefore, we propose to use fuzzy Data Envelopment Analysis (DEA) to rank the weight coefficients in consideration of the inflow variation. In this approach, we generate a set of Paretooptimal solutions by applying different weight coefficients on Coordinated Multi-reservoir Operating Model. Then, we rank the Pareto-optimal solutions or the corresponding weight coefficients by using Fuzzy DEA model. With the proposed approach, we can suggest the best weight coefficients that can produce the appropriate Pareto-optimal solution considering the uncertainty of inflow, whereas the general DEA model cannot pinpoint the best weight coefficients.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1228-1234
• /
• 2015

In this paper, a fuzzy controller using thermoelectric for temperature environmental tester is developed. The new structure of fuzzy controller based temperature environmental tester is proposed and implemented to maintain a stable temperature and improve temperature change speed. In order to evaluate the efficiency, an experiment is setup to compare PID controller with our proposed controller. The experimental results, we proved that our proposed fuzzy controller has better performance than PID controller.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.16 no.4
• /
• pp.262-269
• /
• 2016

In this paper, we propose a novel dynamical love model of Romeo and Juliet, which has an external force with a fuzzy membership function. The external force used in the model has the characteristics of a Gaussian function. The chaotic behavior in the model is demonstrated using time series and phase portraits.