Browse > Article
http://dx.doi.org/10.12989/scs.2020.34.1.155

Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS)  

Shariati, Mahdi (Division of Computational Mathematics and Engineering, Institute for Computational Science, Ton Duc Thang University)
Mafipour, Mohammad Saeed (School of Civil Engineering, College of Engineering, University of Tehran)
Haido, James H. (Department of Civil Engineering, College of Engineering, University of Duhok)
Yousif, Salim T. (Department of Civil Engineering, Al-Qalam University College)
Toghroli, Ali (Institute of Research and Development, Duy Tan University)
Trung, Nguyen Thoi (Division of Computational Mathematics and Engineering, Institute for Computational Science, Ton Duc Thang University)
Shariati, Ali (Institute of Research and Development, Duy Tan University)
Publication Information
Steel and Composite Structures / v.34, no.1, 2020 , pp. 155-170 More about this Journal
Abstract
Different parameters potentially affect the properties of corroded reinforced concrete beams. However, the high number of these parameters and their dependence cause that the effectiveness of the parameters could not be simply identified. In this study, an adaptive neuro-fuzzy inference system (ANFIS) was employed to determine the most influencing parameters on the properties of the corrosion-damaged reinforced concrete beams. 207 ANFIS models were developed to analyze the collected data from 107 reinforced concrete (RC) beams. The impact of 23 input parameters on nine output factors was investigated. The results of the paper showed the order of influence of each input parameter on the outputs and revealed that the input parameters regarding the uncorroded properties of concrete beams are the most influencing factors on the corresponding corroded properties of the beams.
Keywords
Adaptive Neuro-Fuzzy Inference System; system identification; corrosion; reinforced concrete beams;
Citations & Related Records
Times Cited By KSCI : 55  (Citation Analysis)
연도 인용수 순위
1 Trung, N.T., et al. (2019), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", STRUCTURAL ENGINEERING AND MECHANICS 70(5), 639-647. DOI: https://doi.org/10.12989/sem.2019.70.5.639.   DOI
2 Vanluchene, R. and Sun, R. (1990), "Neural networks in structural engineering", Comput.-Aided Civil Infrastruct. Eng., 5(3), 207-215.   DOI
3 Vidal, T., et al. (2007). "Corrosion process and structural performance of a 17 year old reinforced concrete beam stored in chloride environment", Cement Concrete Res., 37(11), 1551-1561.   DOI
4 Toghroli, A., et al. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intel. Manufact., 1-9. DOI: 10.1007/s10845-016-1217-y.
5 Torres-Acosta, A.A., et al. (2007), "Residual flexure capacity of corroded reinforced concrete beams", Eng. Struct., 29(6), 1145-1152.   DOI
6 Wang, X.H. (2008), "Modeling the flexural carrying capacity of corroded RC beam", J. Shanghai Jiaotong Univ., (Science) 13(2), 129-135.   DOI
7 Waszczyszyn, Z. and Ziemianski, L. (2001), "Neural networks in mechanics of structures and materials-new results and prospects of applications", Comput. Struct., 79(22-25), 2261-2276.   DOI
8 Wei-liang, J. and Z. Yu-xi (2001), "Effect of corrosion on bond behavior and bending strength of reinforced concrete beams", J. Zhejiang University-Science, 2(3), 298-308.   DOI
9 Wei, X., et al. (2018), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., 27(3), 389-399. DOI: http://dx.doi.org/10.12989/scs.2018.27.3.389.   DOI
10 Wu, X., et al. (1992), "Use of neural networks in detection of structural damage", Comput. Struct., 42(4), 649-659.   DOI
11 Xie, Q., et al. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct., 30(5), 433-441. DOI: https://doi.org/10.12989/scs.2019.30.5.433.   DOI
12 Xu, C., et al. (2019), "Using genetic algorithms method for the paramount design of reinforced concrete structures", Struct. Eng. Mech., 71(5), 503-513. DOI: https://doi.org/10.12989/sem.2019.71.5.503.   DOI
13 Mohammed, A., et al. (2018), "Simplified finite element model for evaluation of ultimate capacity of corrosion-damaged reinforced concrete beam-columns", Int. J. Adv. Struct. Eng., 10(4), 381-400.   DOI
14 Mohammadhassani, M., et al. (2014), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. DOI: https://doi.org/10.1016/j.engfailanal.2013.08.014.   DOI
15 Mohammadhassani, M., et al. (2015), "Fuzzy modelling approach for shear strength prediction of RC deep beams", Smart Struct. Syst., 16(3), 497-519. DOI: https://doi.org/10.12989/sss.2015.16.3.497.   DOI
16 Mohammadhassani, M., et al. (2014). "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., 48(6), 833-848. DOI: https://doi.org/10.12989/sem.2013.48.6.833.   DOI
17 Najarkolaie, K.F., et al. (2017), "Realistic behavior of infilled steel frames in seismic events: experimental and analytical study", Bull. Earthq. Eng., 15(12), 5365-5392.DOI:10.1007/s10518-017-0173-z.   DOI
18 Nasrollahi, S., et al. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., 27(5), 537-543. DOI: http://dx.doi.org/10.12989/scs.2018.27.5.537.   DOI
19 Shariat, M., et al. (2018), "Computational Lagrangian Multiplier Method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., 29(2), 243-256. DOI: https://doi.org/10.12989/scs.2018.29.2.243.   DOI
20 Shariati, A., et al. (2012), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys. Sci., 7(11), 1828-1831. DOI: 10.5897/IJPS11.1604.
21 Shariati, A., et al. (2012), "Various types of shear connectors in composite structures: A review", Int. J. Phys. Sci., 7(22), 2876-2890.
22 Imam, A. and Azad, A.K. (2016), "Prediction of residual shear strength of corroded reinforced concrete beams", Int. J. Adv. Struct. Eng., 8(3), 307-318.   DOI
23 Hosseinpour, E., et al. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., 26(4), 485-499. DOI: https://doi.org/10.12989/scs.2018.26.4.485.   DOI
24 Huang, R. and Yang, C. (1997), "Condition assessment of reinforced concrete beams relative to reinforcement corrosion", Cement Concrete Compos., 19(2), 131-137.   DOI
25 Imam, A., et al. (2015), "Residual strength of corroded reinforced concrete beams using an adaptive model based on ANN", Int. J. Concrete Struct. Mater., 9(2), 159-172.   DOI
26 Imperatore, S., et al. (2012), Mechanical behaviour of corroded rebars in reinforced concrete elements. Mechanics, Models and Methods in Civil Engineering, Springer: 207-220.
27 Ismail, M., et al. (2018). "Strengthening of bolted shear joints in industrialized ferrocement construction." Steel and Composite Structures 28(6): 681-690.   DOI
28 Shariati, A., et al. (2014), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Constr. Build. Mater., 52, 276-283. DOI: http://dx.doi.org/10.1016/j.conbuildmat.2013.11.036.   DOI
29 Shariati, M. (2013), Behaviour of C-shaped Shear Connectors in Stell Concrete Composite Beams, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
30 Shariati, M., et al. (2011), "Assessing the strength of reinforced concrete structures through Ultrasonic Pulse Velocity and Schmidt Rebound Hammer tests", Scientific Res. Essays, 6(1), 213-220.
31 Shariati, M., et al. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete. Proceedings of the 4th International Conference on Steel & Composite Structures, 21 - 23 July, 2010, Sydney, Australia, Research Publishing Services.
32 Shariati, M., et al. (2011). "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 world congress on advances in structural engineering and mechanics (ASEM'11+).
33 Shariati, M., et al. (2015), "Behavior of V-shaped angle shear connectors: experimental and parametric study", Mater. Struct., 49(9), 3909-3926. DOI: 10.1617/s11527-015-0762-8.   DOI
34 Jalali, A., et al. (2012), "Seismic performance of structures with pre-bent strips as a damper", Int. J. Phys. Sci., 7(26), 4061-4072.
35 Jang, J.S. (1993), "ANFIS: adaptive-network-based fuzzy inference system", IEEE T. Syst. Man, Cy., 23(3), 665-685.   DOI
36 Kallias, A.N. and Rafiq, M.I. (2010), "Finite element investigation of the structural response of corroded RC beams", Eng. Struct., 32(9), 2984-2994.   DOI
37 Katebi, J., et al. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Engineering with Computers: 1-20.
38 Abraham, A. (2005), Adaptation of fuzzy inference system using neural learning. Fuzzy systems engineering, Springer: 53-83.
39 Yan, X., et al. (2017). "Experimental studies on mechanical properties of corroded steel bars after elevated temperature", Procedia Eng., 210, 622-629.   DOI
40 Yamamoto, T., et al. (2011), Systematic laboratory test on structural performance of corroded reinforced concrete and its utilization in practice. Modelling of Corroding Concrete Structures, Springer: 113-124.
41 Zandi, Y., et al. (2018), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct., 28(4), 439-447. DOI: https://doi.org/10.12989/scs.2018.28.4.439.   DOI
42 Zhou, S., et al. (2019), "Degradation behavior of concrete under corrosive coal mine environment", Int. J. Mining Sci. Technol., 29(2), 307-312.   DOI
43 Zhu, W. and Francois, R. (2014), "Corrosion of the reinforcement and its influence on the residual structural performance of a 26-year-old corroded RC beam", Constr. Build. Mater., 51, 461-472.   DOI
44 Ziaei-Nia, A., et al. (2018), "Dynamic mix design optimization of high-performance concrete", Steel Compos. Struct., 29(1), 67-75. DOI: https://doi.org/10.12989/scs.2018.29.1.67.   DOI
45 Sadeghipour Chahnasir, E., et al. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., 22(4), 413-424. DOI: http://dx.doi.org/10.12989/sss.2018.22.4.413.   DOI
46 Nosrati, A., et al. (2018), "Portland cement structure and its major oxides and fineness", Smart Struct. Syst., 22(4), 425-432. DOI: https://doi.org/10.12989/sss.2018.22.4.425.   DOI
47 Ou, Y.C., et al. (2012), "Cyclic performance of large-scale corroded reinforced concrete beams", Earthq. Eng. Struct. D., 41(4), 593-604.   DOI
48 Oyado, M., et al. (2011), "Bending performance of reinforced concrete member deteriorated by corrosion", Struct. Infrastruct. Eng., 7(1-2), 121-130.   DOI
49 Paul, S.C. and Van Zijl, G.P.A.G. (2017), "Corrosion deterioration of steel in cracked SHCC", Int. J. Concrete Struct. Mater., 11(3), 557-572.   DOI
50 Rodriguez, J., et al. (1997), "Load carrying capacity of concrete structures with corroded reinforcement", Constr. Build. Mater., 11(4), 239-248.   DOI
51 Safa, M., et al. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steelconcrete composite beam's shear strength", Steel Compos Struct., 21(3), 679-688. DOI: https://doi.org/10.12989/scs.2016.21.3.679.   DOI
52 Kazerani, S., et al. (2014), "Seismic behavior of drilled beam section in moment connections", Numer. Method. Civil Eng., 1(2), 21-28.
53 Khan, I., et al. (2011), Mechanical behavior of long-term corroded reinforced concrete beam. Modelling of Corroding Concrete Structures, Springer: 243-258.
54 Khan, I., et al. (2012), "Structural performance of a 26-year-old corroded reinforced concrete beam", Eur. J. Environ. Civil Eng., 16(3-4), 440-449.   DOI
55 Shariati, M., et al. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. DOI: https://doi.org/10.1016/j.conbuildmat.2016.05.102.   DOI
56 Shariati, M., et al. (2012), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Design, 41, 67-73. DOI: https://doi.org/10.1016/j.matdes.2012.04.039.   DOI
57 Shariati, M., et al. (2012), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Proceedings of the 5th International Conference on Engineering Failure Analysis, 1-4 July 2012, Hilton Hotel, The Hague, The Netherlands.
58 Shariati, M., et al. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Constr. Build. Mater., 38, 582-593. DOI: https://doi.org/10.1016/j.conbuildmat.2012.07.050.   DOI
59 Shariati, M., et al. (2014), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134. DOI: https://doi.org/10.1016/j.engfailanal.2014.02.017.   DOI
60 Shariati, M., et al. (2017), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering-CSM 2017.
61 Shariati, M., et al. (2019), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., 24(4), 553-566. DOI: https://doi.org/10.12989/sss.2018.22.4.553.   DOI
62 Shariati, M., et al. (2019), "Application of a Hybrid Artificial Neural Network-Particle Swarm Optimization (ANN-PSO) Model in Behavior Prediction of Channel Shear Connectors Embedded in Normal and High-Strength Concrete", Appl. Sciences, 9(24), 5534.   DOI
63 Arabnejad Khanouki, M.M., et al. (2016). "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Constr. Steel Res., 121, 144-162. DOI: https://doi.org/10.1016/j.jcsr.2016.01.002.   DOI
64 Altoubat, S., et al. (2016), "Laboratory simulation of corrosion damage in reinforced concrete", Int. J. Concrete Struct. Mater., 10(3), 383.   DOI
65 Arabnejad Khanouki, M.M., et al. (2010). "Investigation of seismic behaviour of composite structures with concrete filled square steel tubular (CFSST) column by push-over and timehistory analyses", Proceedings of the 4th International Conference on Steel & Composite Structures.
66 Arabnejad Khanouki, M.M., et al. (2011), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168: 2329-2333. DOI:http://dx.doi.org/10.4028/www.scientific.net/AMR.168-170.2329.   DOI
67 Azad, A.K., et al. (2007), "Residual strength of corrosiondamaged reinforced concrete beams", ACI Mater. J., 104(1), 40.
68 Berto, L., et al. (2008), "Numerical modelling of bond behaviour in RC structures affected by reinforcement corrosion", Eng. Struct., 30(5), 1375-1385.   DOI
69 Khorramian, K., et al. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., 23(1), 67-85. DOI: https://doi.org/10.12989/scs.2017.23.1.067.   DOI
70 Khorami, M., et al. (2017), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., 63(2), 259-268. DOI: https://doi.org/10.12989/sem.2017.63.2.259.   DOI
71 Khorramian, K., et al. (2015), "Behavior of tilted angle shear connectors", PLoS One 10(12), e0144288. DOI: https://doi.org/10.1371/journal.pone.0144288.   DOI
72 Khorramian, K., et al. (2016), "Behavior of Tilted Angle Shear Connectors (vol 10, e0144288, 2015)", PLoS One, 11(2).
73 Kim, H.R., et al. (2016). "Evaluation of bond properties of reinforced concrete with corroded reinforcement by uniaxial tension testing", Int. J. Concrete Struct. Mater., 10(3), 43-52.   DOI
74 Li, D., et al. (2019), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., 23(2), 207-214. DOI: https://doi.org/10.12989/sss.2019.23.2.207.   DOI
75 Lu, C., et al. (2017), "A numerical study on the impact resistant capacity of RC beams with corroded reinforcement", Procedia Eng., 210, 341-348.   DOI
76 Luo, Z., et al. (2019), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., 30(3), 271-280. DOI: http://dx.doi.org/10.12989/scs.2019.30.3.271.   DOI
77 Ma, Y., et al. (2014), "Fatigue life prediction for aging RC beams considering corrosive environments", Eng. Struct., 79, 211-221.   DOI
78 Berto, L., et al. (2009), "Seismic assessment of existing RC structures affected by degradation phenomena", Struct. Saf., 31(4), 284-297.   DOI
79 Bossio, A., et al. (2017), Evaluation of seismic behavior of corroded reinforced concrete structures", Proceedings of the 15th International Forum World Heritage and Disaster, Capri, Italy.
80 Bossio, A., et al. (2018), "An overview of assessment and retrofit of corroded reinforced concrete structures", Procedia Structural Integrity, 11, 394-401.   DOI
81 Bossio, A., et al. (2015), "Modeling of concrete cracking due to corrosion process of reinforcement bars", Cement Concrete Res., 71, 78-92.   DOI
82 Shetty, A., et al. (2015), "Experimental and numerical investigation on flexural bond strength behavior of corroded NBS RC beam", Int. J. Adv. Struct. Eng. (IJASE), 7(3), 223-231.   DOI
83 Maia, L. and Alves, S. (2017), "Low durability of concrete elements due to steel corrosion-cases wherein the steel reinforcing bars acted as an internal clock bomb", Procedia Struct. Integrity, 5, 139-146.   DOI
84 Shariati, M., et al. (2019). "Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct., 33(3), 319-332. DOI: https://doi.org/10.12989/scs.2014.33.3.319.   DOI
85 Shariati, M., et al. (2019). "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., 31(5), 427-435.DOI: https://doi.org/10.12989/scs.2019.31.5.427.   DOI
86 Shi, X., et al. (2019), "Viscoelastic analysis of silica nanoparticlepolymer nanocomposites", Compos. Part B: Eng., 158, 169-178.   DOI
87 Sinaei, H., et al. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579.
88 Sinaei, H., et al. (2012), "Evaluation of reinforced concrete beam behaviour using finite element analysis by ABAQUS", Scientific Res. Essays, 7(21), 2002-2009.
89 Song, L., et al. (2019), "Experimental and analytical investigation of the fatigue flexural behavior of corroded reinforced concrete beams", Int. J. Concrete Struct. Mater., 13(1), 24.   DOI
90 Tahmasbi, F., et al. (2016), "Shear capacity of C-Shaped and Lshaped angle shear connectors", PLoS One, 11(8), e0156989. DOI: https://doi.org/10.1371/journal.pone.0156989.   DOI
91 Tahmasebi, P. and Hezarkhani, A. (2010), "Comparison of optimized neural network with fuzzy logic for ore grade estimation", Aus. J. Basic Appl. Sci., 4(5), 764-772.
92 Tahmasebi, P. and Hezarkhani, A. (2012), "A hybrid neural networks-fuzzy logic-genetic algorithm for grade estimation", Comput. Geosci., 42, 18-27.   DOI
93 Cavaco, E.S. (2009), Robustness of corroded reinforced concrete structures.
94 Broomfield, J. (1997), Corrosion of steel in concrete. UK: E & FN Spon, Chapman & Hall.
95 Cabrera, J. (1996), "Deterioration of concrete due to reinforcement steel corrosion", Cement Concrete Compos., 18(1), 47-59.   DOI
96 Castel, A., et al. (2011), Modelling the stiffness reduction of corroded reinforced concrete beams after cracking. Modelling of Corroding Concrete Structures, Springer: 219-230.
97 Cohen, P., et al. (2014), Applied multiple regression/correlation analysis for the behavioral sciences, Psychology Press.
98 Committee, A. and Standardization, I.O.f. (2008), Building code requirements for structural concrete (ACI 318-08) and commentary, American Concrete Institute.
99 Coronelli, D. and Gambarova, P. (2004), "Structural assessment of corroded reinforced concrete beams: modeling guidelines", J. Struct. Eng., 130(8), 1214-1224.   DOI
100 Abdalla, J.A., et al. (2007), "Modeling and simulation of shear resistance of R/C beams using artificial neural network", J. Franklin Institute, 344(5), 741-756.   DOI
101 Abedini, M., et al. (2017), "Evaluation of concrete structures reinforced with fiber reinforced polymers bars: A review", J. Asian Scientific Res., 7(5), 165.DOI: 10.18488/journal.2.2017.75.165.175.   DOI
102 Abedini, M., et al. (2019), "Large deflection behavior effect in reinforced concrete columns exposed to extreme dynamic loads", engrXiv: 32. DOI: http://dx.doi.org/10.31224/osf.io/6n5fs.
103 Sajedi, F. and Shariati, M. (2019), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos. Struct., 30(5), 417-432. DOI: https://doi.org/10.12989/scs.2019.30.5.417.   DOI
104 Shah, S., et al. (2016), "Behavior of steel pallet rack beam-tocolumn connections at elevated temperatures", Thin Wall. Struct., 106, 471-483. DOI: https://doi.org/10.1016/j.tws.2016.05.021.   DOI
105 Sari, P.A., et al. (2018), "An intelligent based-model role to simulate the factor of safe slope by support vector regression", Eng. Comput., 1-11.
106 Sedghi, Y., et al. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., 22(3), 335-340. DOI: https://doi.org/10.12989/sss.2018.22.3.335.   DOI
107 Sen, R., et al. (1999), "Durability of carbon fiber-reinforced polymer/epoxy/concrete bond in marine environment", Struct. J., 96(6), 906-914.
108 Milovancevic, M., et al. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Physica A: Statistical Mechanics and its Applications, 53, 121169.   DOI
109 Mansouri, I., et al. (2016). "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng. Mech., 60(3), 471-488.   DOI
110 Mansouri, I., et al. (2019). "Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique", J. Intel. Manufact., 30(3), 1247-1257.   DOI
111 Daie, M., et al. (2011), "A new finite element investigation on prebent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050. DOI: https://doi.org/10.5897/ijps11.1585.
112 Davoodnabi, S.M., et al. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., 30(2), 141-147. DOI: https://doi.org/10.12989/scs.2019.30.2.141.   DOI
113 Fernandez, I. and Berrocal, C.G. (2019), "Mechanical properties of 30 year-old naturally corroded steel reinforcing bars", Int. J. Concrete Struct. Mater., 13(1), 9.   DOI
114 Hamdia, K.M., et al. (2015), "Predicting the fracture toughness of PNCs: A stochastic approach based on ANN and ANFIS", Comput. Mater. Sci., 102, 304-313. DOI: https://doi.org/10.1016/j.commatsci.2015.02.045.   DOI
115 Shahabi, S., et al. (2016), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., 20(3), 651-669. DOI: https://10.12989/scs.2016.20.3.651.   DOI
116 Shahabi, S., et al. (2016), "Performance of shear connectors at elevated temperatures-A review", Steel Compos. Struct., 20(1), 185-203. DOI: https://doi.org/10.12989/scs.2016.20.1.185.   DOI
117 Shannag, M.J. and Al-Ateek, S.A. (2006), "Flexural behavior of strengthened concrete beams with corroding reinforcement", Constr. Build. Mater., 20(9), 834-840.   DOI
118 Shao, Z., et al. (2019), "Estimating the Friction Angle of Black Shale Core Specimens with Hybrid-ANN Approaches", Measurement.
119 Shao, Z. and Vesel, A. (2015). "Modeling the packing coloring problem of graphs", Appl. Math. Model., 39(13), 3588-3595.   DOI
120 Shao, Z., et al. (2018). "Kriging Empirical Mode Decomposition via support vector machine learning technique for autonomous operation diagnosing of CHP in microgrid", Appl. Therm. Eng., 145, 58-70.   DOI
121 Thang, L.D., et al. (2016), "A new design approach based on differential evolution algorithm for geometric optimization of magnetorheological brakes", Smart Mater. Struct., 25(12).
122 Hamidian, M., et al. (2012), "Application of Schmidt rebound hammer and ultrasonic pulse velocity techniques for structural health monitoring", Scientific Res. Essays, 7(21), 1997-2001. DOI: http://dx.doi.org/10.5897/SRE11.1387.
123 Heydari, A. and Shariati, M. (2018), "Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium", Struct. Eng. Mech., 66(6), 737-748. DOI: https://doi.org/10.12989/sem.2018.66.6.737.   DOI
124 Tai, V.V., et al. (2017). "Modified genetic algorithm-based clustering for probability density functions", J. Stat. Comput. Simul., 87(10), 1964-1979. DOI: https://doi.org/10.1080/00949655.2017.1300663.   DOI
125 Toghroli, A. (2015), Applications of the ANFIS and LR models in the prediction of shear connection in composite beams/Ali Toghroli, University of Malaya.
126 Toghroli, A., et al. (2018), "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method", Comput Concret, 21(5), 525-530. DOI: https://doi.org/10.12989/cac.2018.21.5.525.   DOI
127 Toghroli, A., et al. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., 17(5), 623-639. DOI: https://doi.org/10.12989/scs.2014.17.5.623.   DOI
128 Toghroli, A., et al. (2017), "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland.
129 Toghroli, A., et al. (2018), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., 22(4), 433-440. DOI: https://doi.org/10.12989/sss.2018.22.4.433.   DOI