• Journal of Environmental Impact Assessment
• /
• v.26 no.2
• /
• pp.105-113
• /
• 2017

Recently mountain tourism has been promoted and introduction of railroads with utilizing mountain resources is being planned. With the government policies to increase the share of eco-friendly transportation on railroad, national double-tracking of single rail and improvement projects are on going. However, the eco-friendly railroad policy suggests the environmental impact assessment items only on air quality, water quality, geographical/geological features, fauna/flora, natural/environmental resources, noise/ vibration, and recreation/landscape. And for fauna/flora and natural/environmental resources, confirming the presence of environmental protection zone is enough to satisfy legal requirement. This study suggested to evaluate environmental/ecological values with quantitative data. Evaluation indices and evaluation items have been selected to provide the data. Each of the subject map and railroad network was overlapped. The study selected naturalness and diversity as major indicators and calculated weight values of the items under the indicators, which are to be usd for the selection of the sites for railway development. This assessment method could be applied to the environmentally friendly construction of railroads in the future.

• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.71-77
• /
• 2010

It is increasing annually that the cost for bridge Maintenance Repair & Rehabilitation (MR&R) in developed countries. Based on Intelligent Technology, Bridge Management System (BMS) is developed for optimization of Life Cycle Cost (LCC) and reliability to predict long-term bridge deteriorations. However, such data are very limited amongst all the known bridge agencies, making it difficult to reliably predict future structural performances. To alleviate this problem, an Artificial Neural Network (ANN) based Backward Prediction Model (BPM) for generating missing historical condition ratings has been developed. Its reliability has been verified using existing condition ratings from the Maryland Department of Transportation, USA. The function of the BPM is to establish the correlations between the known condition ratings and such non-bridge factors as climate and traffic volumes, which can then be used to obtain the bridge condition ratings of the missing years. Since the non-bridge factors used in the BPM can influence the variation of the bridge condition ratings, well-selected non-bridge factors are critical for the BPM to function effectively based on the minimized discrepancy rate between the BPM prediction result and existing data (deck; 6.68%, superstructure; 6.61%, substructure; 7.52%). This research is on the generation of usable historical data using Artificial Intelligence techniques to reliably predict future bridge deterioration. The outcomes (Long-term Bridge deterioration Prediction) will help bridge authorities to effectively plan maintenance strategies for obtaining the maximum benefit with limited funds.

• Journal of Korea Port Economic Association
• /
• v.28 no.1
• /
• pp.229-261
• /
• 2012

Concerning the political situations of Korea, after the coming of MB Administration the blockades between South and North has been deepened. Because of stopping of the tourism of Diamond Mountain, the Cheonan ship accidents and the ** bombardment of Yeonpyung island, the situation of confrontation of South and North is enlarged. After the death of Kim Jong-il, on 17 Dec. 2011, the new situations are opened in North Korea(NK). On the basis of economic cooperation between South and North, various logistical cooperation of South and North has been progressed. On November of 2002, the 1st Shipping Cooperation Meeting of South and North, which may be a basis of Shipping Agreement has been discussed. And the railway between South and North has been connected. This study, screening the change of South and North conditions, analyzed the tasks and current conditions of South and North logistics based on economic cooperation, with the previous researches and data of South and North Korea. And it grouped and suggested future development directions and practical agenda, after considering the recent changes. Furthermore it proposed the medium-long term logistical system of Korea peninsula and future strategies and vision. To solve the confrontation situations the role of South Korea is more important.

• Journal of the Korean Society for Railway
• /
• v.18 no.5
• /
• pp.401-409
• /
• 2015

Defects generated in a railroad track that guides the railroad vehicle have the characteristic of growing fast; as such, the detection technology for railroad track defects is very important because defects can eventually cause mass disasters like derailments. In this study, a speed-up test facility was fabricated to investigate the feasibility of using magnetic flux leakage (MFL) technology for defect detection in a railroad track under speed-up condition; a test was conducted using a railroad track specimen with defects. For this purpose, an MFL sensor head dedicated to the configuration of the railroad was designed and test specimens with artificial defects on their surfaces were manufactured. Using the test facility, a speed-up test ranging from 4km/h to 12km/h was performed and defects including locations were successfully detected from MFL signals induced by defects with enhanced visibility by differentiating raw MFL signals. In the future, it should be possible to apply this system to a high-speed railroad inspection car by improving the lift-off stability that is necessary for speed-up of the developed MFL sensor system.

• Information Systems Review
• /
• v.14 no.1
• /
• pp.67-84
• /
• 2012

Recent increases in uncertainty and speed of market change are driving the adoption of new intelligent mobile office systems. Organizational information systems paradigm suggests that a right match between organizational characteristics and the use of technology is critical in producing desired results. Following such perspective this study developed the mobile office system case of Seoul Metropolitan Railway Transit(SMRT) in Korea. SMRT developed the mobile task-supporting environment that help the management of subway lines real-time without the restriction of time and space. They named the system as ST&F(SMRT Talk and Flash). They decided to develop the application systems in-houses they did not want to be overly dependent on external services in future changes and developments of the system. The new practice reduced the time for moving back and forth to 10% of their working time from previous 20%. The time used for paper works and administration chore also reduce to 10% of their working time from previous 30% on the average. The employees could use 80% of their time to concentrate on the completion of assigned task. The effects of this improvement resulted in the heightened efficiency of the use of human resources and the heightened level of railway safety. The case of SMRT shows that the mobile office system can be applied and extended to various business areas such as facility management and maintenance beyond such typical uses as sales and marketing support. Also, The result of case study will be a useful guideline on the construction and using of mobile office system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.802-809
• /
• 2017

3D printing technology is a manufacturing process for products, in which polymer and metal materials are laminated to form structures. It is advantageous for manufacturing parts requiring a high degree of design freedom and functionality. In addition, it would be a suitable technology for the production of parts for railway vehicles in the future, due to the need to produce parts in small quantities. In order to fully exploit the advantages of 3D printing technology, it is necessary to consider the process characteristics during the design of the product. In this study, the redesign and manufacturing technology of the product considering the performance and process conditions were studied for the heat exchanger in the air compressor of railway vehicles, as a trial application of the 3D printing technique. First of all, the design concept to improve the performance of the heat exchanger was defined, and the design range was specified to satisfy the performance of the present heat exchanger analyzed experimentally. Then, the detailed design was revised considering the characteristics of the metal 3D printing process, such as the manufacturing restrictions and production time. Based on the final design, the product was fabricated by the 3D printing process using aluminum material, and it was confirmed that the dimensional accuracy was satisfied. The weight of the final product was reduced by 41% compared with the existing products. The results of this study will make it possible to develop an efficient product design process for 3D printing technology.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.672-684
• /
• 2016

UIC Codes 714R & 715R recommend the use of line classifications and their usage in maintenance work by employing notional traffic loads. However, the classification has not been applied to local lines and, therefore, a new line classification system based on UIC 714R has been proposed in this study. For this, various classification models of UIC, Germany, and UK have been studied first and equivalent traffic loads based on Korail's report, as well as on train timetables, have been derived. The results of the classifications have been compared with those of major European countries and it has been shown that the proposed classification is equivalent to the average value in the European cases. The line classification can be fully utilized during the decision making process of maintenance work and will also be used to model the Reliability Centered Maintenance (RCM) in the future.

• Journal of Korean Port Research
• /
• v.7 no.1
• /
• pp.43-58
• /
• 1993

There has been fast progress in economy in Korea derived by a consecutive five-year plan program for economic development started in the early 1960's. In the field of transportation, rapid changes in the technological environment of transportation and communication have brought a revolution of the transport system, of which inter-modal transportation through containerisation is typical. Because of the rapidly growing traffic volumes of cargo, especially container traffic, and lack of investment into transport infrastructure in the past, both road and railway are beyond their capacity. As a result, the public-road network has suffered a serious congestion problem. For instance, in relation to the corridor between Seoul and Pusan, today, it takes about 14 hours for the journey of container trailer through Kyongbu Expressway, for which it used to take only 7 hours in 1986. For the railway, though the congestion problem is not very serious compared with the road sector, a shortage of capacity on certain main lines has emerged as a problem as railway traffic has increased. Furthermore, the further expansion of the system in near future is difficult due to burden of higher construction the cost. Unlike these two modes, coastal shipping, which has been paid relatively less attention for commodity transport in Korea, shows no constraint in this respect. In addition, it is the most cost efficient mode of transport. This work therefore aims to make a proposal for the alternative inland transportation mode, which is to promote the coastal transport of container. Three obstructing factors for the promotion of the coastal transport are investigated and some solutions for those are suggested as follows : First, it appears to be essential to provide exclusive ports for the coastal shipping, that comply with simplification, specialization and rationalization. The optimum size of berths on the exclusive ports in Pusan port is estimated as 16-20. We found that it needs periodical study and publicity on the advantages from the adoption of the coastal mode. Inducing competition in the coastal shipping market is also necessary. For the supply of the fleet in the coastal shipping, chartering of the surplus ships in the oversea shipping is found to be more desirable than new shipbuilding. Second, to solve the fragmentation of the companies which wish to participate in the coastal transport, government has to implement the subsidy policy. The encouragement of participation of the shipping lines engaging in Korea-Japan run and Korea-East South Asia run, into coastal shipping also needs to be considered cautiously. Third, simplification of the document for entry in ports is needed for rational coastal shipping management. We can use B/L (Bill of Lading) for coastal shipping as a prerequisite to get the indemnity by P & I Club. The reduction of the government controls on entering and leaving the ports also needs.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.107-115
• /
• 2007

Among public transportation facilities within urban area, electric railway (subway) has been a regionally based facility that has played an important role in improving the foundation of territory development and arrangement of living foundation and living environment while supplementing the regional road network. In this regard, the subway stations should be allocated in the right place to ensure mobility, convenience and economic feasibility, some of transportation characteristics of road network combined with the subway. However, it would be very hard to evaluate quantitatively the effects of public transportation facilities such as subway in metropolitan cities on regional development and change in land use and to suggest the data that would be utilized in future city planning corresponding to their results. Therefore, this study evaluated the change in land use by the conditions of location of subway stations quantitatively; then, it evaluated and analyzed the change in land use for the internal and external parts of the surrounding areas of subway stations through the GIS spatial analysis and classification of landsat TM satellite image for utilizing it as reference material for the new establishment of subway stations in the future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.1-13
• /
• 2018

The present study was conducted to analyze transport mode choice factors of shippers in Korea and to suggest policy implications and directions for future research. The findings showed that the research on freight mode choice factors in Korea is somewhat insufficient compared to that of other countries. In order to enhance the research, it is necessary to expand the number of studies and to strengthen the research to reflect characteristics of each transport mode. In particular, it is necessary to focus on identifying the characteristics of multimodal transport, including railway and shipping linked to truck. On the other hand, it was confirmed that the major factors influencing the choice of transport mode of shippers in Korea overlapped with foreign research cases. In addition, the implications for policy were derived when the analysis was separately conducted for Korea and other countries regarding individual transport mode and transport range. These results could be applied to various fields such as policy making to improve the efficiency of shippers' selection of transport mode and the estimation of transport mode choice model.