• Korean Journal of Human Ecology
• /
• v.18 no.2
• /
• pp.407-418
• /
• 2009

In our modern society along with high speed economic growth and improvement of living conditions and through concentration of people in cities cars became essential necessities for people living in modern society. Due to social and economic conditions and for the need of recycling of materials and as a countermeasure for waste of materials importance of car service is stressed. In this connection need for improvement of working clothes which are suitable for safety and working efficiency in a difficult working environment is essential. However most of working clothes now being sold in the market are produced without consideration of ergonomic aspects of wearers of working clothes. For this reason there is need for basic research on development of working clothes which improve safety and comfort for working of car service workers. Accordingly in this study this author carried out research on fitness, level of satisfaction and dissatisfaction, suitability for movement and level of demand for improvement in working clothes with focus on workers at car service firms and direction for its improvement was explored. This study is intended to provide basic data for development of functional pattern of working clothes for car service workers in future.

• Journal of ILASS-Korea
• /
• v.9 no.1
• /
• pp.8-14
• /
• 2004

future exhaust emission limits for diesel-driven passenger cars will force the automotive company to significantly develop of the new technologies of diesel engine respectively of the drive assemblies. As we know, the contributions of soot and nitrogen oxide is the main problems in diesel engine. Recently, as a result, the pilot injection of common-rail fuel injection system recognizes an alternative function to solve an environmental problem. This study describes the effect of the nozzle structure and driven characteristic of injector on pilot injection fur a passenger car common-rail system. The pilot spray structure such as spray tip penetration, spray speed and spray angle were obtained by high speed images, which is measured by the Mie scattering method with optical system fur high-speed temporal photography. Also the CFD analysis was carried out for fuel behavior under high pressure in between needle and nozzle of injector for common-rail system to know the condition of initial injection at experiment test. It was found that solenoid-driven injector with 5-hole was faster than 6-hole injector in spray speed at same conditions and piezo-driven injector showed faster response than solenoid injector.

• Transactions of the KSME C: Technology and Education
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2017

From early simple bulky detectors to show the existence of some specific material, sensor has been developed to miniature smart sensors embedded signal capabilities with a help of nano/micro engineering such as innovative nano materials and semiconductor process technologies. Due to recently fast sales of smart phones with simple telephone function plus many sensors, internet accessing capabilities, easy user downloadable "app" softwares, smart sensor industry market has expanded very fast. If driver-less cars, wearable electronic devices and smart robots will be introduced into market in near future, development of many various smart sensors will be needed.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.05a
• /
• pp.219-222
• /
• 2009

Rapid object recognition is one of the main stream research themes focusing to reveal how human recognizes object and interacts with environment in natural world. This field of study is of consequence in that it is highly important in evolutionary perspective to quickly see the external objects and judge their characteristics to plan future reactions. In this study, we investigated how human detect natural scene objects and categorize them in a limited time frame. We applied Magnetoencepahlogram (MEG) while participants were performing detection (e.g. object vs. texture) or basic-level categorization (e.g. cars vs. dogs) tasks to track the dynamic interaction in human brain for rapid object recognition process. The results revealed that detection and categorization involves different temporal and functional connections that correlated for the successful recognition process as a whole. These results imply that dynamics in the brain are important for our interaction with environment. The implication from this study can be further extended to investigate the effect of subconscious emotional factors on the dynamics of brain interactions during the rapid recognition process.

• Journal of ILASS-Korea
• /
• v.20 no.4
• /
• pp.207-216
• /
• 2015

Recently, the researches for air pollutant control technologies have been performing in Korea, while considering an one of the latest main topics as problems on air pollutant control. However, it is difficult to investigate emission amount of air pollutant by passenger cars, because of lack of the domestic information about mobile source; the number of research institutes are less in the whole. Especially, the informations on registered numbers and emissions of motorcycles are less. Thus, in this study, the analysis that is based on experimental results was conducted for finding out source profiling and emission characteristics on motorcycles exhaust. For these experiments, the domestic motorcycles were chosen and evaluated by EURO III standard. From the result, controlled pollutants (CO, HC, NOx) were met to EURO III, but low displacement motorcycles showed a higher incomplete combustion reaction than that of 250 cc motorcycles. Additionally, uncontrolled pollutants (BTEX and 1,3-butadiene) were decreased with increasing a displacement of motorcycles. However, the emission trend of aldehydes was not followed that of those; the formaldehyde ratio increased upto approximately 33%, with increasing a displacement of motorcycles. In the future, it would be used to support the CAPSS as basic data of Korea.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.5
• /
• pp.55-63
• /
• 2018

In this paper, we designed a system that integrate and organize customer management programs and databases, which are performed independently of each other. And we designed the system so that it can be used for future marketing by implementing the system to share and efficiently utilize mutual independent maintenance information. From the CRM perspective, a comprehensive information system ghat manages every information on both new cars and second hand cares grom their purchase, to parts, to insurance, and to scraping needs to be established. The following should be applied in the establishment of the IAMS. Auto makers or auto maintenance services providers exclusive management of information on customers and their car maintenance services is aggravating the customer's inconvenience and complaints. In addition, the service provider has difficulty providing consistent maintenance services because it has little information about previous auto maintenance services the customer received. Besides, the customers who have no information on costs of parts and labor tend to hesitate to trust the costs of maintenance services. This study to provide customers with systematic maintenance service and causing them some inconvenience. Therefore, in order to maintain existing customers, auto maintenance service providers should provide services the customers wanted on the basis of accurate information about them.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.4
• /
• pp.577-583
• /
• 2012

Objective: This paper describes the process and results related to the development of gesture recognition-based natural user interface(NUI) for vehicle maintenance e-Training system. Background: E-Training refers to education training that acquires and improves the necessary capabilities to perform tasks by using information and communication technology(simulation, 3D virtual reality, and augmented reality), device(PC, tablet, smartphone, and HMD), and environment(wired/wireless internet and cloud computing). Method: Palm movement from depth camera is used as a pointing device, where finger movement is extracted by using OpenCV library as a selection protocol. Results: The proposed NUI allows trainees to control objects, such as cars and engines, on a large screen through gesture recognition. In addition, it includes the learning environment to understand the procedure of either assemble or disassemble certain parts. Conclusion: Future works are related to the implementation of gesture recognition technology for a multiple number of trainees. Application: The results of this interface can be applied not only in e-Training system, but also in other systems, such as digital signage, tangible game, controlling 3D contents, etc.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.2076-2081
• /
• 2004

Future exhaust gas limits for diesel-driven passenger cars will force the automotive industry to significantly improve the performance of engine. Since modern common-rail injection systems deliver more degrees of freedom referring to the injection process, again the optimization of the injection process could offer a possibility to meet the exhaust gas limits. This study describes the characteristic the pilot spray structure of piezo-driven injector for a passenger car common-rail system to be applicable multiple injection caused by fast response rather than solenoid-driven injector. The piezo-driven injector is prototype injector with same needle chamber of solenoid injector and the solenoid-driven one is commercial injector. The pilot spray characteristic such as spray tip penetration, spray speed, spray angle were obtained by spray images, which is measured by the Mie scattering method with optical system for high-speed temporal photography. It was found that piezo-driven injector effected electric change as important factor and showed faster response than solenoid-driven injector.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.4
• /
• pp.53-58
• /
• 2006

IHRA Pedestrian Working Group has investigated and analyzed the current status of pedestrian-vehicle accidents in IHRA member countries. According to the results, European countries and Japan are working on new regulations to improve passive pedestrian protection on passenger cars significantly. Although IHRA proposed pedestrian test procedures, which may provide a basis of technical regulations in the future, further research and development are necessary to refine the procedures. In order to prepare and satisfy the pedestrian protection requirements, domestic passenger vehicles also should be tested. Among various safety-related studies based on accident data analysis, dealing with pedestrian head injury would be considered one of the keen interests. In this study, the pedestrian headform impact test system is developed. The developed system will be useful to carry out validation study of the test procedures through actual tests using sample vehicles, and to explore the car feasibility level prior to the use of the test methods in legislation.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.356-361
• /
• 2005

Earth brush for electrical multiple units(EMUs) is a device through which the current of the EMU load's consumed power fed from the DC 1,500V overhead line (or from the AC 25.000V catenary) flows via axle to the rail(ground) and which prevents the electric corrosion of the axle bearings by preventing the current flow to the axle bearings caused by electric potential from the magnetic field when the bearings rotate together with the earthing function when a thunderbolt falls or a surge comes. The earth brush wear rates among cars, however, shows quite differences when the earth brushes after being separated from the holders are measured with vernier callipers every 6 months of maintenance period. Main causes of the earth brush wear are divided as mechanical, electric arc and electrical one, and the factors can be running speed, current, harmonics, connection state. spring tension, earth brush material, lubricant and so on. but only the earth brushes of the motor(M1) car show the highest wear rate and moreover maintenance difficulty occurs because of the wear rate differences among e earth brushes in one holder. The reason for these preponderant wear comes from the design concept of making preponderant current flow to some particular earth brushes and moreover the heat generated by the harmonics when the inverter starts to operate accelerate the wear. By defining these causes through experiments. I hope that the found results would be helpful for the future EMU design, safety, economy and maintenance.