• 물과 미래
• /
• 제24권1호
• /
• pp.109-117
• /
• 1991

포화-비포화 영역에서 transient흐름 해석을 위해 유체의 연속방정식과 Darcy 법칙으로부터 다공질 매체에서의 흐름 지배방정식을 유도하였다. 수치해는 가중잔차원리에 입각한 Galerkin 유한요소법으로 구하며, 시간도함수항에는 유한차분법을 적용하였다. 해석에서는 실제 자연상태에서 발생되는 부정호우자료를 이용하고 이때의 지표하 흐름 해석에 필요한 강우 주상도는 제 손실성분을 고려한 초과우량 추정모형으로부터 얻었다. 비포화 토양에서의 흐름을 고려하기 위해 투수계수, 압력수두 및 체적함수비의 상호 함수관계를 이용하였다. 모형은 대칭인 2차원으로서 비등방성, 이질 토층으로 구성하였다.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.23-34
• /
• 2000

Three dimensional, compressible, mass weighted averaging of Favre, Navier-Stokes system with k-$\varepsilon$ turbulence, is numerically discretized to compute three dimensional multiple jet interaction flow fields for a hybrid projectile containing three rocket motors in the ogive section. Numerical flow field computations have been made for angled nose jets and rockets at supersonic speed using multiblock structured grid. The jet conditions include very high jet to free stream pressure ratio and high temperature. It is shown that the strength of nozzle stagnation pressure affects the flow field near the side nozzle and the high stagnation pressure increases total amount of drag by a few percent. However, minor drag loss due to the pressure drag might be fully overcomed by an additional axial thrust. The results of present study can be applied for the design of future hybrid projectile.

• Journal of information and communication convergence engineering
• /
• 제16권4호
• /
• pp.258-263
• /
• 2018

Color Doppler sonography is a useful tool for examining blood flow and related indices. However, it should be done by well-trained operator, that is, operator subjectivity exists. In this paper, we propose an automatic blood flow area extraction method from brachial artery that would be an essential building block of computer aided color Doppler analyzer. Specifically, our concern is to examine hypertension suspicious (prehypertension) patients who might develop their symptoms to established hypertension in the future. The proposed method uses fuzzy C-means clustering as quantization engine with careful seeding of the number of clusters from histogram analysis. The experiment verifies that the proposed method is feasible in that the successful extraction rates are 96% (successful in 48 out of 50 test cases) and demonstrated better performance than K-means based method in specificity and sensitivity analysis but the proposed method should be further refined as the retrospective analysis pointed out.

• Journal of information and communication convergence engineering
• /
• 제18권4호
• /
• pp.239-244
• /
• 2020

This study analyzed the influencing factors of learning engagement and teaching presence in online programming practice classes. The subjects of this study were students enrolled in an industrial specialized high school, who practiced creating Arduino circuits and programming using a web-based virtual practice tool called Tinkercad. This research adopted a tool that can measure task value, learning flow, learning engagement, and teaching presence. Based on this analysis, learning flow had a mediating effect between task value and online learning engagement, as well as between task value and teaching presence. Increasing learning engagement in online classes requires sensitizing the learners about task value, using hands-on platforms available online, and expanding interaction with instructors to increase learning flow of students. Furthermore, using virtual hands-on tools in online programming classes is relevant in increasing learning engagement. Future research tasks include: confirming the effectiveness of online learning engagement and teaching presence through pre- and post-tests, and conducting research on various practical subjects.

• Journal of Information Processing Systems
• /
• 제13권2호
• /
• pp.236-255
• /
• 2017

The rapid growth of smart devices demands an enhanced throughput for network connection sustainability during mobility. However, traditional wireless network architecture suffers from mobility management issues. In order to resolve the traditional mobility management issues, we propose a novel architecture for future wireless access network based on software-defined network (SDN) by using the advantage of network function virtualization (NFV). In this paper, network selection approach (NSA) has been introduced for mobility management that comprises of acquiring the information of the underlying networking devices through the OpenFlow controller, percepts the current network behavior and later the selection of an appropriate action or network. Furthermore, mobility-related scenarios and use cases to analyze the implementation aspects of the proposed architecture are provided. The simulation results confirm that the proposed scenarios have obtained a seamless mobility with enhanced throughput at minimum packet loss as compared to the existing IEEE 802.11 wireless network.

• Journal of Mechanical Science and Technology
• /
• 제15권4호
• /
• pp.522-530
• /
• 2001

An experimental study of compressible jet flows has been undertaken in a small transonic wind tunnel. The aim of this investigation was to realize a jet simulator in the framework of wing/nacelle integration research and to characterize the jet flow behavior. First, free jet configuration, and subsequently jet flow in co-flowing air stream configuration were analyzed. Flow conditions were those encountered in a typical flight condition of a generic transport aircraft, i.e. fully expanded sonic jet flows interacting with a compressible external flowfield. Conventional experimental techniques were used to investigate the jet flows-Schlieren visualization and two-component Laser Doppler Velocimetry (LDV). The mean and fluctuating properties were measured along the jet centerline and in the symmetric plane at various downstream locations. The results of two configurations show remarkable differences in the mean and fluctuating components and agree well with the trend observed by other investigators. Moreover, these experiments enrich the database for such flow conditions and verify the feasibility of its application in future aerodynamic research of wing/nacelle interactions.

• 한국전산유체공학회지
• /
• 제20권2호
• /
• pp.46-51
• /
• 2015

In this paper, we have developed numerical model for particulated flow through narrow slit using Eulerian-Granular method. Commercial software (FLUENT) was utilized as simulation tool and main focus was to identify the effect from various numerical options for modeling of solid particles as continuos phase in granular flow. Gidaspow model was chosen as basic model for solid viscosity and drag model. And lun-et-al model was used as solid pressure and radial distribution model, respectively. Several other model options in FLUENT were tested considering the cross related effect. Mass flow rate of the particulate through the slit was measured to compare. Due to the high volume density of the stacked particulates above the slit, effect from various numerical options were not significant. The numerical results from basic model were also compared with experimental results and showed very good agreement. The effects from the characteristics of particles such as diameter, angle of internal friction, and collision coefficient were also analyzed for future design of velocity resistance layer in solar thermal absorber. Angle of internal friction was found to be the dominat variable for the particle mass flow rate considerably. More defined 3D model along with energy equation for complete solar thermal absorber design is currently underway.

• 물과 미래
• /
• 제28권2호
• /
• pp.155-168
• /
• 1995

본고는 개수로 마찰계수를 산정하거나 단면평균유속을 구하는 전통적인 방법의 경험식을 논의하였으며, 새로운 형태의 산정식을 제시하였다. 기존 경험식중 형태가 가능한 것은 차원의 일치를 기하기 위하여 수정하였으며, 등가조고를 도입하여 새로운 형태의 경험식을 제안하였다. 개수로에서의 마찰계수 분포도 원형판에서의 완난류 마찰계수 분포와 유사함을 고려하여 대부분의 관측자료는 완난류 구간에 드는 것으로 판단하였으며, 원형관 완난류 마찰계수 산정식을 수정하여 사각형 개수로 완난류 마찰계수 산정식을 개발하였다. 또한 차원의 일치를 이룬 새로운 형태의 경험식들을 포함하여 이들 산정식을 Bazin의 실험자료에 적용하여 비교 검토하였다.

• 터널과지하공간
• /
• 제16권4호
• /
• pp.307-312
• /
• 2006

처분 용기 부식 후 유출된 방사성 핵종은 지하수 유동 경로를 따라 이동하게 된다. 따라서 지하 암반내 지하수 유동 평가는 처분 안전성 평가를 위한 기본적인 요소라 할 수 있다. 본 연구에서는 처분 시스템 폐쇄 후 미래 특정 시점에서 지형의 변화가 지하수 유동 경로에 끼치는 영향을 다공질 매질에서의 지하수 유동 해석 코드인 NAMMU를 이용한 평가를 통해 확인해 보았다. 단열에 인접한 지역에 가상의 처분 시스템을 선정하고 처분 시스템 주위에 존재하는 단열의 재활성화가 발생하는 경우 처분장으로부터의 지하수 유동에 끼치는 영향을 정량적으로 평가해 보았다.

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.1-6
• /
• 2003

Engine emission regulations are becoming more stringent nowadays. In cold transient regime, about 80% THC is exhausted to the atmosphere in the first 200s (US FTP cycles). Accordingly, reducing emission levels in the cold period immediately after the engine start before the catalysts reach their working temperature will be an especially critical factor in meeting more stringent regulations in the future. In this study, the total hydrocarbon quantities are measured using a Fast FID with gasoline fuel for a 4-cylinde. Sl engine, including Secondary Air Injection (SAI) system. Commercial SAI device's direction is reverse to the exhaust flow. In this study, a swirl flow type SAI system which is positioned between the exhaust manifold and exhaust port, was developed. We compared the swirl type secondary air injection with a commercial secondary air injection of .everse flow. The swirl type SAI showed better results in reducing HC by 26% than the commercial flow type SAI of reverse flow which was caused by the better mixing between the exhaust gas and the secondary air.