• Journal of Korean Neurosurgical Society
• /
• v.41 no.2
• /
• pp.77-81
• /
• 2007

Objective : In a variety of thoracolumbar diseases, corpectomy followed by interbody bone graft and anterior instrumentation has allowed direct neural decompression and reconstruction of the weight-bearing column by short segments fusion. In this study, we compared spinal stability of the two different anterior thoracolumbar instruments : Z-plate and Kaneda device representing plate and two-rods type, respectively. Methods : A retrospective review was performed for all the patients with thoracolumbar diseases or traumas treated with anterior corpectomy, autologous iliac bone graft, and fixation with instruments from 1996 to 2000. For the anterior instrumentation, Z-plate or Kaneda device was used for 24 [M:F=5:9, average age=37] and 12 [M:F=9:3, average age=41] patients, respectively. The plain AP and lateral flexion-extension films were taken immediately after surgery and at each follow-up. The sagittal and coronal Cobb's angles at the operation segments were used to observe the change of initial fixation status. The surgical time length and bleeding amount of the two groups were compared. Intra-operative and post-operative instrument associated complications were evaluated. Student t-test was used for statistical analysis and p-value less than 0.05 was considered to be significant. Results : Mean follow-up durations for Z-plate and Kaneda device were 24 and 21 months, respectively. The fusion rate was 91% for Z-plate and 100% for Kaneda device. Two cases of Z-plate group showed instrumentation failure during the follow up period, in which additional surgery was necessary. The mean differences of sagittal Cobb's angles among the AP images immediate after surgery and at follow-up were 7 and 2 degrees for Z-plate and Kaneda device, respectively [p<0.05]. The mean differences of coronal Cobb's angles were 5 and 2 degrees for Z-plate and Kaneda device, respectively [p<0.05]. No Intra-operative complication has occurred in both groups. There was no difference in surgery time and bleeding amount between two groups. Conclusion : We think that Kaneda device [rod type] is stronger than Z-plate [plate type] to keep the spinal stability after anterior thoracolumbar surgery.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.2
• /
• pp.101-115
• /
• 2018

The purpose of this study is to contribute to the development of the women's fashion field with the goal of creating creative and experimental fashion styles through the categorization of cases of women's fashion design expressed with Maximalism, a type of expression used in modern fashion, as well as analyzing and examining the formativeness of this style. Qualitative research was conducted through a literature review and design case analysis. The scope of this research was from 2011 S/S to 2016 F/W, and the regional scope included the women's collections from Paris, Milano, London and New York. The results acquired are as follows. Initially, exaggeration was expressed through excessively exaggerating the overall silhouette of clothing or exaggeratedly distorting certain parts of the overall silhouette. Secondly, decoration was expressed through the use of the same colors and materials and the addition of excessive details and trimmings to express an exaggerated style of clothing as well as to express a luxurious and handcrafted style of clothing. Thirdly, fusion was expressed through integrating multiple items from different cultures, deconstruction, which destroys the concept of gender and use of clothing, and fashion style that transcends time and space. Fourthly, non-structurality was expressed through differentiating multiple weight feelings applied to the left/right sides of clothing or expressing a structural designs that is asymmetrical to the upper/lower/left/right directions to create a silhouette that displays a creative avant-garde style. As examined above, it was found that the maximalism expressed in fashion after 2011 created new images and expressed maximized emotional orientations through the exaggerated use of multiple silhouettes and decorations or through the integration of colors, patterns, ages and images. Through this process, maximalism is expected to not only provide an infinite possibility to the modern fashion that pursues diversification and multiplication, but also serve as an example that represents diversified post-modernism fashion trends in the future.

• Laser Solutions
• /
• v.16 no.3
• /
• pp.1-10
• /
• 2013

In this study, Al-Si coated boron steel(1.2 mm) were laser welded by $CO_2$ laser and hot-stamping was applied to the laser joints. Tensile properties and microstructures of the joints were investigated before and after hot-stamping. Tensile and yield strengths of the as welded specimen similar with base metal and fracture occurred base metal of boron steel. Although, in case of heat treated specimen, fracture occurred fusion zone that Al segregated zone near the bond line. These could be explained by the existence of ferrite, in the Al segregated zone near the bond line and base metal of boron steel. Before hot-stamping, hardness of base metal is lower than fusion zone and heat affected zone in spite of exist Al segregation zone($Fe_3$(Al,Si)). So fracture occurred base metal. Although, after hot-stamping, microstructure of base metal and welds zone transformed to martensite and bainite except in Al segregation zone near the bond line that $Fe_3$(Al,Si) transformed to a-ferrite. So fracture occurred Al segregation zone near the bond line.

• Journal of Life Science
• /
• v.20 no.12
• /
• pp.1801-1806
• /
• 2010

A $\beta$-xylosidase encoding gene from Klebsiella sp. Sc was cloned in Escherichia coli. The $\beta$-xylosidase gene consisted of an open reading frame of 1,680 nucleotides and encodes 559 amino acids with a deduced molecular weight of 63 kDa. The deduced amino acid sequence of the $\beta$-xylosidase from Klebsiella sp. Sc exhibits 90% identities and 95% positives compared to those from Klebsiella oxytoca (KOX), Lactobacillus lactis (LAC, 82%, 90%), Bacillus longum (BLON, 69%, 81%) and Escherichia coli (ECOLI, 47%, 63%). The $\beta$-xylosidase was purified by GST-fusion purification system. The pH and temperature optima of the enzyme were 6.6 and $55^{\circ}C$, respectively. The $\beta$-xylosidase hydrolyzes xylobiose to xylose.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.6
• /
• pp.622-627
• /
• 2014

This paper proposes a new method which improves recognition rate on the gait recognition system using wavelet transform, linear discriminant analysis and genetic algorithm. We use wavelet transform to obtain the four sub-bands from the gait energy image. In order to extract feature data from sub-bands, we use linear discriminant analysis. Distance values between training data and four sub-band data are calculated and four weights which are calculated by genetic algorithm is assigned at each sub-band distance. Based on a new fusion distance value, we conducted recognition experiments using k-nearest neighbors algorithm. Experimental results show that the proposed weight fusion method has higher recognition rate than conventional method.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.22 no.2
• /
• pp.59-64
• /
• 2011

Protein kinase C (PKC) is involved in many cellular signaling pathways, it participates in many physiological processes, such as cell cycle, growth, proliferation, differentiation and apoptosis. To investigate the effect of PKC on the silkworm midgut tissue infection of Bombyx mori parvo-like virus (BmPLV), a B. mori atypical protein kinase C (BmaPKC) gene was cloned from larval midgut tissue, expressed in E. coli and purified. Additionally, the BmPLV susceptible silkworm strain and resistant silkworm strain were used to test the effect of the B. mori infection on BmPLV. The result showed that BmaPKC encodes a predicted 586 amino acid protein, which contains a C-terminal kinase domain and an N-terminal regulatory domain. The maximum expression amount of the soluble (His)6-tagged fusion protein was detected after 0.8 mmol/L IPTG was added and cultured at $21^{\circ}C$. The (His) 6-tagged fusion protein revealed about 73 kDa molecular weight which confirmed by western blot and mass spectrography. Furthermore BmaPKC protein were detected at 0-72 h post-infection in BmPLVinfected larval midgut tissue, western blot showed that as time went on, the expression of BmaPKC increased gradually in susceptible strain, the expression quantity on 72 h is 5 times of 0 h. However, in resistant strain, the expression quantity is slightly lower than susceptible strain. But no significant change in resistant strain was observed as time went on. The available data suggest that BmaPKC may involve in the regulation of BmPLV proliferation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.9
• /
• pp.2605-2625
• /
• 2024

Siamese-based segmentation and tracking algorithms improve accuracy and stability for video object segmentation and tracking tasks simultaneously. Although effective, variability in target appearance and background clutter can still affect segmentation accuracy and further influence the performance of tracking. In this paper, we present a memory propagation-based target-aware and mask-attention decision network for robust object segmentation and tracking. Firstly, a mask propagation-based attention module (MPAM) is constructed to explore the inherent correlation among image frames, which can mine mask information of the historical frames. By retrieving a memory bank (MB) that stores features and binary masks of historical frames, target attention maps are generated to highlight the target region on backbone features, thus suppressing the adverse effects of background clutter. Secondly, an attention refinement pathway (ARP) is designed to further refine the segmentation profile in the process of mask generation. A lightweight attention mechanism is introduced to calculate the weight of low-level features, paying more attention to low-level features sensitive to edge detail so as to obtain segmentation results. Finally, a mask fusion mechanism (MFM) is proposed to enhance the accuracy of the mask. By utilizing a mask quality assessment decision network, the corresponding quality scores of the "initial mask" and the "previous mask" can be obtained adaptively, thus achieving the assignment of weights and the fusion of masks. Therefore, the final mask enjoys higher accuracy and stability. Experimental results on multiple benchmarks demonstrate that our algorithm performs outstanding performance in a variety of challenging tracking tasks.

• Journal of the Korea Concrete Institute
• /
• v.25 no.4
• /
• pp.439-446
• /
• 2013

The objective of this study is to evaluate the workability and various mechanical properties of heavyweight magnetite concrete and examine the reliability of the design equations specified in code provisions. The main parameters investigated were the water-to-cement ratio and substitution level of normal-weight coarse aggregate (granite) for magnetite. The oven-dried unit weight of concrete tested ranged between 2446 and $3426kg/m^3$. The measured mechanical properties included compressive strength development, stress-strain curve, splitting tensile strength, moduli of elasticity and rupture, and bond stress-slip relationship of concrete. Test results revealed that the initial slump of heavyweight magnetite concrete increased as the substitution level of normal-weight coarse aggregate increases. The substitution level of normal-weight coarse aggregate had little influence on the compressive strength and tensile resistance capacity of heavyweight concrete, while it significantly affected the modulus of elasticity and stress-strain curves of such concrete. The design equations of ACI 349-06 and CEB-FIP provisions mostly conservatively predicted the mechanical properties of heavyweight magnetite concrete, but the empirical equations for modulus of elasticity and splitting tensile strength need to be modified considering the unit weight of concrete.

• Journal of Intelligence and Information Systems
• /
• v.15 no.1
• /
• pp.51-64
• /
• 2009

A location tracking sensor such as GPS, INS, Radar, and optical equipments is used in tracking Maneuvering Targets with a multi-sensor, and such systems are used to track, detect, and control UAV, guided missile, and spaceship. Until now, Most of the studies related to tracking Maneuvering Targets are on fusing multiple Radars, or adding a supplementary sensor to INS and GPS. However, A study is required to change the degree of application in fusions since the system property and error property are different from sensors. In this paper, we perform the error analysis of the sensor properties by adding a ground radar to GPS and INS for improving the tracking performance by multi-sensor fusion, and suggest the tracking algorithm that improves the precision and stability by changing the sensor probability of each sensor according to the error. For evaluation, we extract the altitude values in a simulation for the trajectory of UAV and apply the suggested algorithm to carry out the performance analysis. In this study, we change the weight of the evaluated values according to the degree of error between the navigation information of each sensor to improve the precision of navigation information, and made it possible to have a strong tracking which is not affected by external purposed environmental change and disturbance.

• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.15-22
• /
• 1984

This study was conducted to identify the enzyme treatment time, enzyme concentration and plant growth condition for isolation of potato mesopyll, it was also performed to determine the adquate sucrose molarity on purification of protoplasts and to investigate the incubation time, PEG concentration and DMSO effect for potato-petunia protoplast fusion. The results were summarized as follows: The optimal time of incubation in enzyme solution was 3 - 4 hours and high humidity and low light intensity made plants more effective to protoplast releasing enzymes. Our experimental results showed that the pectolyase Y-23 was an ideal agent for isolation from mesophyll cultured in vitro compared with macerozyme. The enzyme solution with 0.5 % macerozyme and 2 % cellulase was very effective and the purity of healthy protoplast was better in 0.4 and 0.5 M sucrose than in others. It was revealed that the rate of potato-petunia fusion according to the incubation time with PEG was effective at 30 min incubation and percentage of protoplast aggregation was increased by high molecular weight and concentration of PEG. Percentage of potato-petunia protoplast heteroplasmic aggregation was increased by 4 to 16 % in PEG 6000 compared with PEG 4000 and PEG 1500. Addition of 5 to 10 % DMSO to the PEG solution increased to the heteroplasmic aggregation of potato-petunia from 2 to 4 %.