• 한국수산과학회지
• /
• 제22권4호
• /
• pp.169-176
• /
• 1989

분말가쓰오부시의 향기성분을 상압수증기증류법으로 추출한 후 중성구분, phenol성구분, 산성구분 및 염기섬구분으로 분획하여 fused silica capillary column을 장치한 고분해능 GC 및 GC-MS에 의해서 분리, 동정하였다. 전휘발성 성분의 함량은 약 300 ppm으로서 중성구분 $48\%$, phenol 성구분 $35\%$, 산성구분 $12\%$, 염기성구분 $5\%$로 이루어져 있었고, 관능검사결과 중성구분 및 phenol 성구분의 기여도가 컸다. 분말가쓰오부시 향기성분으로 총 68성분이 동정확인되었으며, 이 중 30성분이 중성구분으로 동정되었고 hydrocarbon류 8성분, aldehyde류 8성분, furan류 6성분, alcohol류 5성분 및 ketone류 3성분으로 구성되어 있었다. phenol성구분은 phenol, guaiacol, dimethon phenol, eugenol 등 16성분, 산성구분은 propionic, butanoit isopentanoic, n-hexanoic, heptanoic, octanoic acid 등 12성분이 동정되 었고, 염기성구분으로는 pyrazine류 7성분, 2-methylpyridine, 2,4-dimethylthiazole 등 10성분이 동정확인되었다. 한편 분말가쓰오부시의 저급휘발성 carbonyl성분을 2,4-DNPH유도체로 만들어 GC로써 분석한 결과 ethanal, propanal, 2-methylpropanal, butanal, pentanal, 2-methylpentanal 등 8성분이 분리 동정되었다.

• 한국식품과학회지
• /
• 제37권4호
• /
• pp.513-518
• /
• 2005

포도종실추출물에 함유되어 강력한 항산화 작용을 나타내는 성분인 proanthocyanin의 구성 성분이면서 에피머인 (+)-catechin과 (-)-epicatechin을 CE법을 이용하여 분석하였다. CE법을 이용한 catechin류 분석의 최적 조건은 fused silica capillary$(20cm{\times}50{\mu}m)$, current $56{\mu}A$, voltage 10 kV, phosphate/borate buffer(pH 6.0), 온도 $20^{\circ}C$로서 (+)-catechin과 (-)-epicatechin을 6분 이내에 매트릭스의 방해없이 분석할 수 있었다. 비색법, HPLC법과 CE분석법의 특징을 비교해 보면 비색법은 (+)-catechin과 (-)-epicatechin합한 총 함량은 알 수 있으나 두성분의 분리는 할 수 없었다. 또한 HPLC방법은 표준품은 두 성분이 잘 분리되었으나 시료 분석 시 proanthocyanin을 가수분해하기 위해 첨가한 산으로 인해 시료가 강산성을 띠어 컬럼 손상되는 문제가 있어 직접 분석이 불가능하여 시료를 희석해야 했으며, 희석을 하여 분석할 경우에도 많은 잡 피크들로 정량적인 결과를 얻기에 용이하지 않았다. 한편 CE법의 경우 산 가수분해한 시료를 별다른 처리 없이도 다른 성분의 방해 없이 분석할 수 있었다. 분석소요시간의 경우 비색법은 실험단계가 복잡하여 많은 시간이 걸렸으며 HPLC는 15분 그리고 CE는 6분 이내에 분석이 가능하였다. 재현성과 직선성을 보면 HPLC와 CE의 방법이 모두 양호하였고 검출한계에 있어서는 CE법이 0.035mg/L로서 검출감도가 매우 우수하였다. 이와 같이 CE법은 포도종실에 존재하는 (+)-catechin과 (-)-epicatechln을 분석하는데 방법의 용이성, 분석결과의 정확성에 있어서 기존 방법인 비색법과 HPLC 방법보다 우수한 결과를 나타내었다.

• 한국식품과학회지
• /
• 제20권2호
• /
• pp.176-187
• /
• 1988

모과의 휘발성 flavor 성분은 상압 수증기 증류법에 의해서 추출되었으며, 추출된 휘발성 flavor 성분은 중성, 염기성, 약산성 및 산성구분으로 분획되었다. 분획된 4구분중 산성 구분은 carboxylic acid를 동정하기 위하여 diazomethane법에 의해서 methyl ester화 시켰다. 각 구분중에 함유되어 있는 휘발성 flavor 성분은 fused silica capillary column을 장치한 고분해능 GC 및 GC-MS에 의해서 분리 동정하였다. 모과의 수증기 증류유출액으로부터 얻어진 휘발성 flavor 농축액 중에서 총 145성분이 동정되었으며, 이들은 지방족 탄화수소 3성분, 환상 탄화수소 1성분, 방향족 탄화수소 4성분, terpene 탄화수소 9성분, alcohol 17성분, terpenealcohol 3성분 phenol 6성분, aldehyde 21성분, ketone 7성분, ester 28성분, 산 27성분 furan 3성분, thiazole 2성분 acetal 2성분 lactone 3성분 및 기타 9성분이었다. Carboxylic acid를 제외한 나머지 휘발성 flavor 성분의 대부분은 중성구분으로부터 동정되었다. 중성구분은 다른 구분보다 상당히 높은 수득량을 나타내었으며, 관능검사의 결과에서도 중성 구분은 모과의 방향성을 재현시키기 위해서 필요불가결한 것으로 나타나다. 관능검사용 GC에 의해서 얻어진 결과에 의하면 1-hexanal, cis-3-hexanal, trans-2-hexanal, 2-methyl-2-hepten-6-one, 1-hexanol, cis-3-hexanol, trans, trans-2, 4-hexadienal 및 trans-2-hexanol은 풋 냄새의 주성분으로 생각된다. 한편으로, ester 화합물은 모과의 과일 냄새의 주성분인 것으로 생각된다.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.33-39
• /
• 2010

The moisture absorption properties such as diffusion coefficient and moisture content ratio of liquid type epoxy resin systems with the filler were investigated. Bisphenol A type and Bisphenol F type epoxy resin, Kayahard MCD as hardener and 2-methylimidazole as catalyst were used in these epoxy resin systems. The nano-sized spherical type fused silica as filler were used in order to study the moisture absorption properties of these liquid type epoxy encapsulant according to the change of filler size. The temperature of glass transition (Tg) of these epoxy resin systems was measured using Dynamic Scanning Calorimeter (DSC), and the moisture absorption properties of these epoxy resin systems according to the change of time were observed at $85^{\circ}C$ and 85% relative humidity condition using a thermo-hygrostat. The diffusion coefficients in these systems were calculated in terms of modified Crank equation based on Ficks' law. An increase of Tg and diffusion coefficient with filler size in these systems can be observed, which are attributed to the increase of free volume with Tg. The change of maximum moisture absorption ratio according to the filler size and filler content cannot be observed; however, the diffusion coefficients of these systems decreased with filler content. The diffusion via free volume is dominant in the epoxy resin systems with low nano-sized filler content; however, the diffusion with the interaction of absorption according the increase of the filler surface area is dominant in the liquid type epoxy encapsulant with high nano-sized filler content.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2102-2104
• /
• 2004

In this study, sheathless electrospray from PDMS/glass microchips with conducting metal emitter tip is described. A chip-based capillary electrophoresis/mass spectrometry (CE/MS) system has advantages of the CE separation and on-line electrospray detection of peptide solution. We have fabricated a new electrospray ionization(ESI) device composed of the metal emitter tip and CE separation channel monolithically in a glass microchip. The separation channel and metal emitter tip are fabricated using a glass wet etching and gold electro plating process, respectively. The fabricated micro electrospray chip was tested by spraying peptide sample for mass spectrometric analysis. Singlely-charged peak and doublely-charged peak of peptide were detected and further MS/MS fragmentation was performed in each peak. Direct comparisons with conventional glass or fused silica emitters showed very similar performance with respect to signal strength and stability.

• 대한치과보철학회지
• /
• 제38권3호
• /
• pp.366-374
• /
• 2000

FRC/ceromer system provides the clinician with a durable, flexible, and esthetic alternative to conventional porcelain fused to metal crowns. FRC is the matrix which is silica-coated and embedded in a resin matrix. The ceromer material which is a second generation indirect composite resin contains silanized, microhybrid inorganic fillers embedded in a light-curing organic matrix. FRC/ceromer restoration has a several advantages: better shock absorption, less wear of occluding teeth, translucency, color stability, bonding ability to dental hard tissues, and resiliency. It has versatility of use including inlay, onlay, single crown, and esthetic veneers. With adhesive technique, it can be used for single tooth replacement in forms of inlay adhesion bridge. In single tooth missing case, conventional PFM bridge has been used for esthetic restoration. However, this restoration has several disadvantages such as high cost, potential framework distortion during fabrication, and difficulty in repairing fractures. Inlay adhesion bridge with FRC/ceromer would be a good alternative treatment plan. This article describes a cases restored with Targis/Vectris inlay adhesion bridge. Tooth preparation guide, fabrication procedure, and cementation procedure of this system will be dealt. The strength/weakness of this restoration will be mentioned, also. If it has been used appropriately in carefully selected case, it can satisfy not only dentist's demand of sparing dental hard tissue but also patient's desire of seeking a esthetic restorations with a natural appearance.

• 천문학논총
• /
• 제28권3호
• /
• pp.75-82
• /
• 2013

An optical grism for education is fabricated and tested. It is composed of a transmission grating as dispersion element and a prism as diffraction angle compensation device. The transmission grating is Edmundoptics #49-584(spatial frequency 600 lines/mm, dimension $50mm{\times}50mm$). The prism is the fused silica type with angles ($41.3^{\circ}$, $-48.7^{\circ}$, $-90^{\circ}$). The grism device is fabricated by bonding the transmission grating and the prism with an optical adhesive. The zig for assembling the grism, telescope and camera is composed of an aluminum tube, an aluminum disk ring and a T-ring camera adaptor. The fabricated optical grism spectrograph is tested in laboratory using Halogen lamp and Neon lamp with DSLR camera. And the grism assembled with reflector telescope is tested in a field using stellar light. The results show good agreements with design parameters. The wavelength coverage range of the grism is 250 nm at the un-deviated wavelength of 506 nm. The wavelength resolution is 0.11 nm/pixel.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1213-1218
• /
• 2004

The present article reports extensive numerical results on the non-local characteristics of ultra-short pulsed laser-induced breakdowns of fused silica ($SiO_{2}$) by using the multivariate Fokker-Planck equation. The nonlocal type of multivariate Fokker-Planck equation is modeled on the basis of the Boltzmann transport formalism to describe the ultra-short pulsed laser-induced damage phenomena in the energy-position space, together with avalanche ionization, three-body recombination, and multiphoton ionization. Effects of electron avalanche, recombination, and multiphoton ionization on the electronic transport are examined. From the results, it is observed that the recombination becomes prominent and contributes to reduce substantially the rate of increase in electron number density when the electron density exceeds a certain threshold. With very intense laser irradiation, a strong absorption of laser energy takes place and an initially transparent solid is converted to a metallic state, well known as laser-induced breakdown. It is also found that full ionization is provided at intensities above threshold, all further laser energy is deposited within a thin skin depth.

• 한국식품과학회지
• /
• 제26권1호
• /
• pp.18-22
• /
• 1994

7종의 수용성 비타민 즉, 티아민, 리보플라빈, 피리독신, 시아노코발라민, 아스코르브산, 엽산, 니코틴산을 free solution capillary electrophoresis로 정량분석하였다. 최적 분리조건 설정을 위해 완충용액의 pH, 모세관의 온도 그리고 적용한 전압에 대해 실험한 결과 완충용액의 pH는 6에서는 겹치는 peak가 있었으며 pH 8에서는 최적의 분리를 보여주었고 pH가 더 올라갈수록 분리도는 저하되었다. 모세관의 온도와 적용한 전압은 둘 다 높아질수록 분리시간은 단축되었으며 온도 $25^{\circ}C$, 전압 20 kV에서 최적분리능을 보여주었고 그 이상의 각 조건에서는 두 경우 모두 분리능이 저하되었다. 앞의 최적조건에서 수용성비타민은 8분내에 분리되었으며 각 peak의 migration time의 편차는 $0.01{\sim}0.1$분(CV : 0.9%)이었다.

• 한국연초학회지
• /
• 제13권2호
• /
• pp.20-26
• /
• 1991

This study was carried out to develop the method of alkaloids analysis and investigate the kinds and contents of alkaloids in flue-cured, burley and oriental tobacco leaves using developed analytical method. The developed analytical method of alkaloids was as followed : Tobacco sample was treated with acid(pH 2∼3) and extracted with chloroform to remove chemical components except alkaloids. Sample solution was treated with alkali(pH 12∼ 13) and was extracted with chloroform to obtain alkaloids from sample solution. After extraction of alkaloids from tobacco leaves, alkaloids were separated and identified by GC, GC/MS using SE-54 fused silica capillary column. Nicotine, nornicotine, myosmine, 9-nicotyline, anabasine, anatabine, 2, 3-bipyridyl, cotinine, formyl nornicotine, acetyl nornicotine and formal anatabine were isolated and identified from the extracts of tobacco leaves. The contents of alkaloids were burley > flue-cured > oriental tobacco leaves, but oriental tobacco leaves were higher nornicotine, cotinine, formyl nornicotine and acetyl nornicotine contents than those of flue-cured tobacco leaves. The burley tobacco harvested in Korea was higher nornicotine contents by 2-6 times in the portions of cutter, leaf and tips position than that of burley tobacco(B3F) harvested in V. S. A.