• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.3
• /
• pp.38-42
• /
• 2002

This paper provides that improve productivity of fuse box assembly processing. It is the most difficult processing that automated receptacle assembly job for fuse box assembly. Most of these assembly processing has been made of fuse insert procedure to circuit board by hand-operated. Therefore this study develops the automative fuse box assembly machine for feeding each fuse model automatically.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.221-225
• /
• 2016

This paper is about vision system that exhibits automatic examination of the conditions of fuses and relay boxes using a camera. Proposed vision system is composed of three parts: image acquisition, vision algorithm, and user interface. The image acquisition part is composed of illumination and optics. The vision algorithmis the examining part, using the grabbed fuse box image. Lastly, user interface is divided into two parts, user interface for registering features of fuse box and user interface for examination operation.

• Journal of Korea Multimedia Society
• /
• v.13 no.3
• /
• pp.392-399
• /
• 2010

The Automobile has developed and changed through the years from the invention and increased human-being's scope of activity. Junction Box, one of the part of automobile, is inspected by human eyes which caused mistakes and slow progress. To achieve the speed and accuracy the system was compensated by vision system which is inspecting automatically. This paper is automatic inspection of fuse and relay which is inserted in the junction box by checking the color and pattern of the cover. After checking the performance of the system by using the junction box, the result was 100 percent perception and open the possibility to inspect junction box fast and easy and accurate if it is applied to the industry.

• Structural Engineering and Mechanics
• /
• v.84 no.2
• /
• pp.269-283
• /
• 2022

In this paper, a particular type of all-steel HSS brace members with a locally reduced cross-sectional area was experimentally and numerically investigated. The brace member was strengthened against local buckling with inner and outer boxes in the reduced area. Four single-span braced frames were tested under cyclic lateral loadings. Specimens included a simple steel frame with a conventional box-shaped brace and three other all-steel reduced section buckling-restrained braces. After conducting the experimental program, numerical models of the proposed brace were developed and verified with experimental results. Then the length of the proposed fuse was increased and its effect on the cyclic behavior of the brace was investigated numerically. Eventually, the brace was detailed with a fuse-to-brace length of 30%, as well as the cross-sectional area of the fuse-to-brace of 30%, and the cyclic behavior of the system was studied numerically. The study showed that the proposed brace is stable up to a 2% drift ratio, and the plastic cumulative deformation requirement of AISC (2016) is easily achieved. The proposed brace has sufficient ductility and stability and is lighter, as well as easier to be fabricated, compared to the conventional mortar-filled BRB and all-steel BRB.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.22-28
• /
• 2017

According to the National Fire Data System (NFDS), more than 5,000 vehicle fires have occurred every year for the last 10 years. Vehicle fires are primarily caused by mechanical (breaking system and engine), electrical (wiring and battery), and chemical (oil and fuel gas leakage) problems. The electrical factor has increased with the installation of driver convenience equipment. For example, today, the black box is widely used to provide video data recording of motor vehicle accidents. The black box consists of a front camera, rear camera, and wires. The black box wires are directly connected to the junction box or fuse box from the start battery that operates to provide normal on power supplying for engine stop. It is extremely dangerous when the wires short circuit due to insulation aging, mechanical and electrical stress, etc. In this study, the black box wiring fire risk have been analyzed and investigated when the steady state and abnormal operations, and under the following conditions: wiring arrangements with a high temperature condition, insulation aging, poor contact, and short circuits. The results showed that black box wiring short circuits had a higher fire risk than the other fire hazard elements. To prevent fire hazards caused by black box wiring, the black boxes must be installed by qualified service personnel. Do not modify the wiring, remove the fuse and secure the wiring using cable ties or insulation tape.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.2
• /
• pp.66-72
• /
• 2010

Recently a large number of electronic control devices are abruptly increasing in vehicles as the electronic industry advances. Also the number of wiring harnesses and complexity of wiring is proportionally increased to the devices. A newly developed connector named bridge connector is introduced in this study for the purpose of the wiring structure changes. A wiring structure among distributed control systems by using serial communication is proposed with the bridge connector in this paper. The bridge connector contains a auto-recovery fuse made by PTC thermistor material for the protection of the over-currents on local control devices. The auto-recovery function of the fuse is needed for the maintenance free system in the distributed controls. The PTC fuse characteristics organized in this study is tested and the results are showed in detail for the real application.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.12a
• /
• pp.221-227
• /
• 1999

이논문은 자동차용 휴즈박스 조립과정 가장 난이도가 높은 리셉타클의 자동으로 조립하는 것으로써 기존 시스템은 휴즈를 회로기판에 개별로 수작업으로 삽입하여 스위치의 수동조작에 의해 압입하여 조립하였으나 이를 각 모델별로 자동 공급피더에서 개별적으로 광센서의 신호를 받아 자동으로 공급하는 장치로서 생산성을 대폭 향상시킨 섯이라 할수있다.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.1
• /
• pp.43-49
• /
• 2009

This study set three kinds of situation and observed the various states such as carbonization by experimenting damages by fire of electric iron. The results of this study are as follows: The fire did not occurred when the unpowered iron over mattress and cotton shirts was com busted completely by external flame because the temperature of surface of soleplate and mattress did not reach the minimum ignition energy and when the powered electric iron over mattress and cotton shirts was left for an hour with its temperature dial set to high because the temperature of combustibles did not reach the minimum ignition energy. The fire occurred when the electric iron in which the outer box, bi-metal switch, and temperature fuse were removed over mattress and cotton shirts was powered by through heater terminal, and then the electric iron, mattress, and cotton shirts were combusted by the fallen combustibles because the temperature of combustibles reached to the minimum ignition energy with the help of active transfer of heat.