• Applied Chemistry for Engineering
• /
• v.3 no.3
• /
• pp.482-490
• /
• 1992

2,5-dimethoxy-2,5-dihydrofurfuryl alcohol was electrosynthesized from furfuryl alcohol in methanol solution by using three kinds of metal oxide anode. The electrods were prepared by the following process : Thin layer of semiconducting material such as tin(IV)oxide and antimony(III)oxide was made on the titanium base metal in an electric furnace. The titanium metal block with the layer was coated with ${\alpha}-PbO_2$, ${\beta}-PbO_2$, and $MnO_2$ in each electrolytes by anodic deposition, respectively. The lead dioxide electrodes showed better anti-corrosive property than the manganase dioxide electrode. The yield of the product was 92% which is almost the same as the one with conventional platinum electrodes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.17 no.1
• /
• pp.1-5
• /
• 1988

Kochujang (Red pepper paste) is one of a traditional fermented seasoning foods having peculia. flavor. In present paper, the effects of microorganisms on the formation of volatile components of Kochujang during fermentation were observed. The volatiles of Kochujang were extracted by a steam-distillation under the reduced pressure and determined by gas chromatography and gas chromatography-mass spectrometry (CC-MS), respectively. During fermentation of Kochujang, Saccharomyces sp. and three strains of Bacillus sp. were isolated as main microorganisms participating in the formation of volatile components. According to the analytical results, tetrahydro geroniol, furfuryl alcohol, methoxy acecoptenone and myrtanal in Kochujang inoculated with Saccharomyces spl, 2-methyl-propan-2-ol, furfuryl alcohol an furfuryl-n-butyrate in Kochujang inoculated with Bacillus sp. B-1, 2-methyl-propan-2-ol, furfuryl alcohol and furfuryl-n-butyrate in Kochujang inoculated with Bacillus sp. B-2, and 2-methyl-propan-2-ol, furfuryl alcohol and n-propylbenzene in Kochujang inculated with Bacillus sp. B-3, were identified as major components, respectively.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.502-507
• /
• 2019

Macro-porous carbon foams are fabricated using cured spherical phenolic resin particles as a matrix and furfuryl alcohol as a binder through a simple casting molding. Different sizes of the phenolic resin particles from 100-450 ㎛ are used to control the pore size and structure. Ethylene glycol is additionally added as a pore-forming agent and oxalic acid is used as an initiator for polymerization of furfuryl alcohol. The polymerization is performed in two steps; at 80℃ and 200℃ in an ambient atmosphere. The carbonization of the cured body is performed under Nitrogen gas flow (0.8 L/min) at 800℃ for 1 h. Shrinkage rate and residual carbon content are measured by size and weight change after carbonization. The pore structures are observed by both electron and optical microscope and compared with the porosity results achieved by the Archimedes method. The porosity is similar regardless of the size of the phenolic resin particles. On the other hand, the pore size increases in proportion to the phenol resin size, which indicates that the pore structure can be controlled by changing the raw material particle size.

• Microbiology and Biotechnology Letters
• /
• v.8 no.1
• /
• pp.27-32
• /
• 1980

We isolated a strain of Pseudomonas sp. from soil to utilize furfuryl alcohol as a carton source by enrichment culture. Alcohol dehydrogenase from this bacteria was purified 700-fold by Sephadex G-200 and affinity column chromatography to be homogeneous by electrophoresis and analytical centrifugation. This enzyme had a molecular weight of 120,000 and was composed of four subunits consisting of 266 amino acid residues. The optimal pH of the enzyme was pH 8.5 to 9, and the optimal temperature was, 45$^{\circ}C$. This enzyme was stable at 55$^{\circ}C$, but lost 80% of its activity in 10min at 6$0^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.49-53
• /
• 2019

Hydrous $MnO_2$ nanowires were easily synthesized by an one-pot synthesis with a simple hydrothermal method. As prepared hydrous $MnO_2$ nanowires were characterized with scanning emission microscopy (SEM), transmit emission microscopy (TEM), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET). They showed a good catalytic activity with the suitable nano-size of 4-5 nm and morphology. The furfuryl alcohol was selected as a substrate and the reaction was carried out in a toluene solvent at $100^{\circ}C$ under the atmospheric pressure of oxygen. The hydrous $MnO_2$ nanowire catalyst exhibited an excellent yield of furfural with the first-rate selectivity and conversion. The catalytic performance during recycle tests was also carried out and the catalyst showed a good mechanical strength with a negligible loss in the activity over five reaction cycles.

• Korean Journal of Materials Research
• /
• v.8 no.4
• /
• pp.299-303
• /
• 1998

We examined, using thermoanalytical methods, the effects of $2000^{\circ}C$ heat-treated graphite powders and heating rate of cure after impregnation on the thermal stability and carbon yield of furfuryl alcohol, which is frequently used not only as an impregnant but also as a matrix precursor for carbon fiber-reinforced carbon composites. It was founded that the addition of 30wt% graphite powders to furfuryl alcohol and the heating rate of $35^{\circ}C$/min showed the highest thermal stability of furfuryl alcohol/graphite powder mixture. The carbon yield above $1000^{\circ}C$ was enhanced more than 10% in comparison with the absence of graphite powders. It would be expected that this result can contribute to some extent to reduce the repeating number of processing cycle (carbonization-impregnation-cure-re-carbonization) required to densify a carbonaceous composite.

• Journal of the Korean Society of Tobacco Science
• /
• v.7 no.1
• /
• pp.39-47
• /
• 1985

Normally cultured aromatic tobaccos, KA 101 and KA 103, were primed progressively in three-leaf segments, either 7 days before bud, bud, or early flower stage with 7 days interval, respectively, The cured leaves were weighed for yield, graded, analyzed for quality-related constituents including volatile aroma components. Also the cured leaves were manufactured and smoked by panelists. Yield and quality by price decreased with advancing ripeness. Reducing sugar, total nitrogen, protein nitrogen decreased with successive ripeness, but reverse in this trends with nicotine, petroleum ether extracts and volatile acids components. Among volatile neutral components, furfural, furfuryl alcohol, benzyl alcohol, penethyl alcohol and p-cresol decreased, but solanone increased with delayed harvest. Neophytadiene, oxysolanone, furfuryl aceton was highest at mid harvest, which was judged to be best by panelists. Mid harvest, first primed at bud stage when leaf color comes to pale green to yellow green, seems to be highly recommendable.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.1
• /
• pp.46-58
• /
• 2022

Wood from tropical plantation forests has lower physical and mechanical properties than mature wood. Furfuryl alcohol (FA) impregnation into the wood could help to enhance hydrophobic properties, dimensional stability, and structural strength. Furfurylation was applied to specimens of the following four fast-growing tropical wood species: jabon (Anthocephalus cadamba), sengon (Falcataria moluccana), mangium (Acacia mangium), and pine (Pinus merkusii). The discoloration and physical and mechanical properties were subsequently measured, and the results showed that furfurylated wood had a darker color and better physical and mechanical properties than untreated wood. Specifically, the furfurylated wood had higher density, modulus of elasticity, and hardness and lower moisture content, water absorption, swelling, and shrinkage. The furfurylation significantly enhanced physical and mechanical properties.

• Journal of the Korean Chemical Society
• /
• v.9 no.2
• /
• pp.88-95
• /
• 1965

The exo adduct between furfuryl derivatives (furan, furfuryl acetate and furfuryl alcohol) and maleic anhydride were prepared in the presence of ethyl ether. The bromination of the exo adduct of each derivatives gave a monobromolactone and dibromoacid when the reaction was done in the presence of water. The formation of the bromolactone was proved to be dependent to the carboxylic participation to the incipient rearranged carbonium ion of a classical type, and the participation was sterically hindered by the steric structure of the substituents. The bromination of the furan-maleic anhydride adduct in the presence of organic solvent $(CCl_4,\;CH_2Cl_2)$ gave the dibromide, whereas the photochlorination of the same adduct in the presence of carbon tetrachloride gave the tetrachloride. The procedure of the preparation and the reaction path of the halogenation were described.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.1
• /
• pp.1-13
• /
• 2023

Sengon (Falcataria moluccana Miq.) tree offers a wood of low quality and durability owing to its low density and thin cell walls. This study aimed to improve the properties of sengon wood by making the wood magnetic, producing new functions, and characterizing magnetic sengon wood. Each wood sample was treated using one of the following impregnation solutions: Untreated, 7.5% nano magnetite-furfuryl alcohol (Fe₃O₄-FA), 10% nano Fe₃O₄-FA, and 12.5% nano Fe₃O₄-FA. The impregnation process began with vacuum treatment at 0.5 bar for 2 h, followed by applying a pressure of 1 bar for 2 h. The samples were then tested for dimensional stability and density and characterized using scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD) analysis, and vibrating sample magnetometry (VSM) analysis. The results showed that the Fe₃O₄-FA impregnation treatment considerable affected the dimensional stability, measured in terms of weight percent gain, anti-swelling efficiency, water uptake, and bulking effect, as well as the density of sengon wood. Changes in wood morphology were detected by the presence of Fe deposits in the cell walls and cell cavities of the wood using SEM-EDX analysis. XRD and FTIR analyses showed the appearance of magnetite peaks in the diffractogram and Fe-O functional groups. Based on the VSM analysis, treated sengon wood is classified as a superparamagnetic material with soft magnetic properties. Overall, 10% Fe₃O₄-FA treatment led to the highest increase in dimensional stability and density of sengon wood.