• 대한화학회지
• /
• 제24권1호
• /
• pp.64-72
• /
• 1980

새로운 acrylimide로서 N-acrylylpyrrolidone을 합성하였다. N-Acrylylpyrrolidone은 N-methacrylyl-lactam과는 다르게 homopolymerization을 열적으로도 함을 관찰하였다. Styrene과 N-acrylylpyrrolidone의 공중합시 각 monomer의 reactivity ratio를 구하였다. 그 결과 생성되는 copolymer는 pyrrolidone의 음이온 중합에 적절한 acyl-lactam function을 가지고 있음을 알았다.

• 한국인쇄학회지
• /
• 제16권3호
• /
• pp.29-41
• /
• 1998

The ultraviolet(UV)-curable materials wildly have been used as a ink and coating materials. A according to measure UV polymerization phase separation of acryl groups 2,3,4-functional monomer, a few experiments were performed gel fraction, dynamic viscosity of alkyd resin blend system. Dependence of photoiniator concentration and various monomer, alkyd resin content investigated structural changes of films cured by UV irradiation. Curing rate measured UV irradiation under $25^{\circ}C$, cell gap 7cm and film thickness 100${\mu}{\textrm}{m}$. In results, it was through that the viscoelastic properties of films cured with increasing the ratios of monomer/alkydresin contents are network polymer in properties such as viscoelasticity.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.177-178
• /
• 2003

Many researchers have made efforts to control the stereoregularity in radical polymerization of vinyl monomers because the physical and chemical properties of the polymer are significantly affected by the stereostructure.[1]-[4] In general, monomer design, reaction conditions(e.g. solvent, temperature, and monomer concentration), and additives can alter the stereochemistry of the radical polymerization of acrylic monomer. (omitted)

• 폴리머
• /
• 제31권3호
• /
• pp.269-272
• /
• 2007

본 연구는 생분해성 고분자인 폴리락틱에시드(Poly(lactic acid; PLA)의 가공성을 향상시키는 연구의 일환으로 순수 PLA, 반응압출법에 의한 화학적으로 개질된 PLA 및 기능성 단량체를 함유한 PLA에 전자선을 조사하여 PLA를 개질한 후 유변학적 특성을 조사하였다. 유변학적 특성은 복합점도와 log G' vs. log G" 선도를 이용하여 해석 분석 비교하였다. 그 결과 전자선 조사로 개질된 순수 PLA 및 화학적으로 개질된 PLA의 복합점도는 전자선 조사량에 따라 감소하는 경향을 보였지만, 기능성단량체가 첨가된 PLA는 전자선 조사에 의해 복합점도가 증가하다가 감소하는 경향을 보였다.

• Elastomers and Composites
• /
• 제47권2호
• /
• pp.162-167
• /
• 2012

거대분자의 표면개질은 고분자재료의 물성을 향상시키기 위한 점진적이고 바람직한 방안을 제공하며 고분자의 주요 물성을 손상시키지 않고 고분자 표면의 전도도, 젖음성, 안정성, 접착 및 항박테리아성 등을 개선시킨다. PE 또는 PP 등의 polyolefin을 관능성 단량체로서 MAH와 용액상에서 그래프트시켰다. FTIR측정을 통하여 그래프팅이 일어났음을 확인하였다. 그래프팅율은 화학적정에 의하여 결정하였다. MAH량이 많아질수록 접촉각은 낮은 값을 얻었다. 또한 MAH량이 증가함에 따라 polyolefin-g-MAH의 융점($T_m$)은 감소하는 한편 분해온도($T_d$)는 증가하는 경향을 보였다.

• Macromolecular Research
• /
• 제15권1호
• /
• pp.51-58
• /
• 2007

The approach studied in the present work produced an exfoliated state of clay layers via confinement of the charged nano-sized polystyrene (PS) beads within the gallery of swollen pristine clay. It was demonstrated that adsorption of the polymer nanobeads dramatically promotes expansion of the clay gallery. A comparative study of incorporation was conducted by employing organo-modified clay along with two different colloid polymer systems: electrostatically stabilized PS nanobeads and cationic monomer-grafted PS nanobeads. The mechanism of adsorption of the monomer-grafted polymer beads onto clay via cationic exchange between the alkyl ammonium group of the polymer nanobeads and the interlayer sodium cation of the layered silicate was verified by using several techniques. As distinct from the polymer nanobeads formed using conventional miniemulsion polymerization method, competitive adsorption of stabilizing surfactant molecules was be prevented by grafting the surface functional groups into the polymer chain, thereby supporting the observed effective adsorption of the polymer beads. The presence of surface functional groups that support the establishment of strong polymer-clay interactions was suggested to improve the compatibility of the clay with the polymer matrix and eventually play a crucial role in the performance of the final nanocomposites.

• 폴리머
• /
• 제37권3호
• /
• pp.288-293
• /
• 2013

A group of molecularly imprinted polymers (MIPs) with specific recognition for chiral (S)-ibuprofen were successfully prepared based on hydrogen bonds, utilizing ${\alpha}$-methacrylic acid as a functional monomer. The IR analysis of MIPs showed that the blue- and red-shifted hydrogen bonds were formed between templates and functional monomers in the process of self-assembly imprinting and re-recognition, respectively. According to UV-Vis analysis, we found that the ratio of host-guest complexes between template molecule and functional monomer was 1:1. The effect of cross-linker's quantity on the polymerization was studied by transmission electron microscope (TEM). The adsorption selectivity experiments indicated that MIPs exhibited higher selectivity to (S)-ibuprofen than those to ketoprofen and (R)-ibuprofen, (S)-ibuprofen's structural analogs.

• 한국염색가공학회지
• /
• 제11권2호
• /
• pp.27-37
• /
• 1999

Polypropylene(PP) films were treated with plasma glow discharge to produce peroxy radicals on the surfaces. The peroxy radicals formed on the PP film surfaces were subsequently used for the graft polymerization of acrylic acid and acrylamide in an aqueous solution by heating, respectively. Introduction of acrylic acid and acrylamide on the PP film could be confirmed by the observation of carbonyl and primary amine absorptions based on carboxylic acid and amide, respectively. And introduction of functional group could be confirmed by weight analysis and ESCA. The water contact angle(90$^{\circ}$) of PP film was constant, irrespective of elapsed time, while plasma-treated and functional monomer-grafted PP films were slowly increased with elapsed time, showing the rearrangement of surface polar groups in air condition. The water contact angle$(90^\circ)$ of PP film was decreased by the plasma treatment$(56^\circ)$ and further decreased by the grafting of acrylic acid$(34^\circ)$ and acrylamide$(37^\circ)$, indicating increased hydrophilicity of the modified surfaces. The water contact angle of plasma-treated PP film increased a little as time elapsing. The half-life periods of surface voltage on acrylic acid-(31sec) and acrylamide-grafted PP(42sec) were significantly decreased when compared to those on PP(950sec) and plasma-treated PP film(241sec). In the experiments using acid, basic and disperse dyes, absorbance and $\Delta{E}$ values of functional monomer-grafted PP films were significantly increased than that of oxygen plasma-treated one.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.399-405
• /
• 2013

Two series of new green phosphorescent polymers bearing a bis(2-phenyl-pyridine)iridium(III)(dibenzoylmethane) [$(ppy)_2Irdbm$] complex were designed and synthesized. Poly-carbazole (PCbz) derivative or polyfluorene with pendant carbazole groups (PFCbz) were employed as host polymers for the iridium complex. The iridium complex monomer was copolymerized with the host monomers using varying monomer ratios via a Yamamoto coupling reaction. Efficient energy transfer from host to dopant unit was observed by increasing the ratio of the iridium guest in the copolymers. Electroluminescent devices with the configuration ITO/PEDOT:PSS/polymer/BmPyPB/LiF/Al were fabricated and characterized. The phosphorescent polymers composed of the iridium complex guest and polyfluorene with carbazole pendants as a host performed better than the polymers composed of the same guest and the main chain polycarbazole host. A maximum external quantum efficiency of 0.73%, a luminous efficiency of 1.21 cd/A, and a maximum luminance of 372 $cd/m^2$ were obtained from a device fabricated using one of the synthesized copolymers.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.97-98
• /
• 2006

After general introduction for hyperbranched polymers, hyperbranched polysiloxysilanes (HBPS) were introduced as new functional polymers. Vinyl terminated HBPS was synthesized starting from AB2 type monomer by hydrosilylation reaction. Vinyl group can be converted various functional groups such as carboxylic acid and alcohol. HBPS had strong interaction to inorganic surface. As an example of this phenomenon, silica gel bead for HPLC was modified with thermo sensitive polymers. The resulting bead was successfully applied to Green Chronatography.