맥파의 차동값에 의한 디지털 방식의 혈압 추정 기법 (Digital Blood Pressure Estimation with the Differential Value of the Arterial Pulse Waveform)
-
- 정보처리학회논문지:컴퓨터 및 통신 시스템
- /
- 제5권6호
- /
- pp.135-142
- /
- 2016
본 연구에서는 디지털 방식으로 측정된 맥파의 파형으로부터 최대 높이와 최소 높이의 차이, 즉 맥파의 차동값을 이용하여 혈압을 측정하는 측정 기법을 제시한다. 이를 위하여 본 연구에서는 적분 방식의 디지털 압력 센서와 블루투스, 스마트폰으로 구성되는 맥파 측정 시스템을 이용하여 맥파 데이터를 수집하였다. 수집된 맥파 데이터들은 고혈압, 정상, 저혈압의 군으로 분류되고, 각 맥파 파형의 최고 값과 최저 값의 개인별 차동값 평균을 도출한다. 맥파 측정시 동시에 혈압계로 측정한 최고혈압과 최저혈압의 값과 맥파 데이터로부터 도출된 차동값의 평균값들을 회귀 분석하면 맥파 차동값과 혈압과의 상관관계인 혈압상관관계식을 도출할 수 있다. 이 혈압상관관계식을 이용하여 임의의 실험자의 맥파 측정을 통한 혈압 추정 실험을 수행한 결과 실험자들의 혈압값들을 용이하게 추정할 수 있었다. 기존의 혈압계를 사용한 측정치에 대하여 제안된 기법은 최저혈압의 경우는 최대 66 %의 오차를 보이므로 그다지 높은 정확성을 보이지 못하지만, 최고혈압의 경우에는 10 % 이하의 오차로 혈압값을 추정할 수 있었다.
Background: Assessments of Sit-to-Stand (STS) and gait functions are essential procedures in evaluating level of independence for the patients after stroke. In a previous study, we developed the software to analyze center of pressure (COP) in standing position on Wii Balance Board (WBB). Objects: This purpose of this study is to measure test-retest reliability of ground reaction forces, COP and time using WBB on STS and gait in healthy adults. Methods: Fifteen healthy participants performed three trials of STS and gait on WBB. The time (s), vertical peak (%) and COP path-length (cm) were measured on both tasks. Additionally, counter (%), different peak (%), symmetry ratio, COP x-range and COP y-range were analyzed on STS, 1st peak (%), 2nd peak (%) of weight were analyzed on gait. Intra-class correlation coefficient (ICC), standard error measurement (SEM) and smallest real difference (SRD) were analyzed for test-retest reliability. Results: ICC of all variables except COP path-length appeared to .676~.946 on STS, and to .723~.901 on gait. SEM and SRD of all variables excepting COP path-length appeared .227~8.886, .033~24.575 on STS. SEM and SRD excepting COP path-length appeared about .019~3.933, .054~11.879 on gait. Conclusion: WBB is not only cheaper than force plate, but also easier to use clinically. WBB is considered as an adequate equipment for measuring changes of weight bearing during balance, STS and gait test which are normally used for functional assessment in patients with neurological problems and elderly. The further study is needed concurrent validity on neurological patients, elderly patients using force plate and WBB.
Purpose: The purpose of this study was to examine test-retest reliability and criterion-related validity of a trunk stability robot when measuring the weight-bearing symmetry static sitting and standing in stroke patients. Methods: For 27 stroke patients, weight-bearing symmetry was assessed twice, 7 days apart. The intraclass correlation coefficient (ICC2,1) and minimal detectable change (MDC) were used to examine the level of agreement between test and retest. The criterion-related validity of weight -bearing symmetry was demonstrated by Spearman correlation of modified Barthel index (MBI), the sit to stand test (STS), the timed up & go Test (TUG), and the function in sitting test (FIST). Results: the test-retest agreements were excellent for the weight-bearing symmetry of static sitting (ICC2,1: 0.90) and standing (ICC2,1: 0.89). It all showed that the acceptable MDC for the weight-bearing symmetry of static sitting and standing was 0.11 and 0.16, respectively (highest possible score<20 %), indicating that the measures had a small and acceptable degree of measurement error. The weight-bearing symmetry of static sitting was significantly correlated with the TUG(r=-0.45) and FIST(r=0.46)(p<0.05); the weight-bearing symmetry of static standing was also significantly correlated with MBI (r=0.65), TUG (r=-0.67), FIST (r=0.61)(p<0.01), and STS (r=-0.47)(p<0.05). Conclusion: The weight-bearing symmetry of static sitting and standing assessed by the trunk stability robot showed highly sufficient test-retest agreement and mild-to-moderate validity. It could also be useful for clinicians and researchers to evaluate balance performance and monitor functional change in stroke patients.
The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.
건축시설물 중 제1종 시설물과 제2종 시설물은 유지관리를 위해 정기적으로 정밀안전점검과 정밀안전진단을 실시한다. 건축물의 점검 및 진단을 실시하는 경우 상태평가, 기울기 및 침하, 안전성평가를 종합하여 건축물의 등급이 결정된다. 그리고 평가등급은 점검 및 진단의 주기를 결정한다. 평가 등급이 좋지 않다면 점검 및 진단 주기는 짧아지고, 이로 인한 유지관리 비용은 증가하게 된다. 따라서 건축물을 평가하는 방법은 명확하여야 한다. 상태평가는 부재단위 평가, 층단위 평가, 종합 평가로 이루어진다. 이 중 부재단위 평가는 현장조사와 시험 결과를 통해 등급을 판정한다. 본 연구에서는 상태평가의 첫 번째 단계인 부재단위 평가에 대해 평가방법과 평가기준을 분석하여 개선점을 도출하였으며, 이를 개선하여 현재 부재의 상태점수를 반영할 수 있는 함수식을 제시하였다.
To establish National Reference Method (NRM) for
한국인의 치열의 특성을 고려한 Straight-Wire Appliance(SWA)의 제작을 위한 자료를 얻기 위하여 18세 이상 25세 사이의 한국인 성인 정상교합자를 1) 구강악안면부에 기능장애가 없고, 2) 양호한 치열궁 형태와 긴밀한 구치부 교합관계를 가지며, 3) 교합이 전후방적으로 앵글 분류 I 급의 관계를 가지며, 4) 간단한 수복 치료 외에 교정치료나 보철치료를 받지 않았으며, 특히 치아의 순면과 협면의 형태에 변형을 초래한 치과 치료를 받지 않았으며, 5) 단정한 안모를 가진 자를 선발 기준으로 정하여 선발하였다. 선정된 정상 교합자의 상, 하악 인상을 채득하고, 교정용 석고 모형을 제작하였다. 얻어진 치과 석고모형을 분석하여, Andrews의 Six keys to optimal occlusion에 부합되는 표본을 5 명의 숙련된 교정의사들이 선별하여 한국인 성인 정상교합자 치열의 석고 모형 155쌍(남자 92쌍,여자 63쌍)을 얻었다. 이들을 대상으로 정밀측정장비인 Coordinate Measuring Machine(CMM, MPC802, WEGU-Messtechnik, Germany)을 이용하여 3차원 digitization을 시행하고, 계측프로그램을 작성하여 SWA 제작을 위하여 필요한 Angulation, Inclination, In-and-Out, Molar offset angle, Arch-form 등을 측정하였다. 측정을 시행하기 전에, CMM을 이용한 3차 원 digitization의 오차에 대한 검증을 실시하였고, 3차원 digitization과 컴퓨터를 이용한 형태학적 분석법과 기존의 수작업에 의한 분석법의 신뢰도에 대한 분석을 실시하였다. 이상의 연구를 통하여 얻은 결론은 다음과 같다. 1. 치과 석고모형의 3차원 digitization에 CMM을 적용하여 mesh size 0.25 mm, 0.5 mm, 1.0 mm로 등간격 디지타이징하는 것은 모두 받아들일 수 있으며, 측정의 효율성을 고려할 때 1.0 mm간격으로 등간격 디지타이징 하는 것이 바람직하다. 2. 3차원 digitization과 컴퓨터를 이용한 방법이 Andrews의 방법에 기반한 수작업 방법보다 신뢰성이 높다. 3. 3차원 digitization과 컴퓨터를 이용한 방법으로 한국인의 치열의 형태학적 특성에 맞는 SWA의 제작을 위한 자료를 채득하였다.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70