• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제11권1호
• /
• pp.13-30
• /
• 2007

In this paper we study the numerical solutions of the stochastic functional differential equations of the following form $$du(x,\;t)\;=\;f(x,\;t,\;u_t)dt\;+\;g(x,\;t,\;u_t)dB(t),\;t\;>\;0$$ with initial data $u(x,\;0)\;=\;u_0(x)\;=\;{\xi}\;{\in}\;L^p_{F_0}\;([-{\tau},0];\;R^n)$. Here $x\;{\in}\;R^n$, ($R^n$ is the ${\nu}\;-\;dimenional$ Euclidean space), $f\;:\;C([-{\tau},\;0];\;R^n)\;{\times}\;R^{{\nu}+1}\;{\rightarrow}\;R^n,\;g\;:\;C([-{\tau},\;0];\;R^n)\;{\times}\;R^{{\nu}+1}\;{\rightarrow}\;R^{n{\times}m},\;u(x,\;t)\;{\in}\;R^n$ for each $t,\;u_t\;=\;u(x,\;t\;+\;{\theta})\;:\;-{\tau}\;{\leq}\;{\theta}\;{\leq}\;0\;{\in}\;C([-{\tau},\;0];\;R^n)$, and B(t) is an m-dimensional Brownian motion.

• BMB Reports
• /
• 제33권1호
• /
• pp.43-48
• /
• 2000

4-Aminobutyrate aminotransferase is a key enzyme of the 4-aminobutyric acid shunt. It converts the neurotransmitter 4-aminobutyric acid to succinic semialdehyde. In order to study the structural and functional aspects of catalytically active Cys residues of pig brain 4-aminobutyrate aminotransferase, we purified the active form in E. coli by coproduction of thioredoxin. The structural arrangement for functional requirements of a dimeric protein using a bifunctional sultbydryl reagent was then characterized, and the spatial proximity between the essential SH groups and a cofactor (pyridoxal-5'-phosphate) binding site was determined. The bifunctional sultbydryl reagent DMDS reacted with the enzyme at the ratio of one molecule per enzyme dimer. This resulted in an approximately 50% loss of enzymatic activity. The spatial proximity of the distance between the essential SH groups and the cofactor-binding site was determined by the energy transfer measurement technique. The result (approximate 20 ${\AA}$) suggested that cross-linking of two sulfhydryl groups with DMDS is not near a PLP binding site.

• Kyungpook Mathematical Journal
• /
• 제49권4호
• /
• pp.605-618
• /
• 2009

A stage-structured predator-prey system with time delay and Beddington-DeAngelis functional response is considered. By analyzing the corresponding characteristic equation, the local stability of a positive equilibrium is investigated. The existence of Hopf bifurcations is established. Formulae are derived to determine the direction of bifurcations and the stability of bifurcating periodic solutions by using the normal form theory and center manifold theorem. Numerical simulations are carried out to illustrate the theoretical results.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.109-118
• /
• 2005

A functional suspension model is proposed as a kinematic describing function of the suspension that represents the relative wheel displacement in polynomial form in terms of the vertical displacement of the wheel center and steering rack displacement. The relative velocity and acceleration of the wheel is represented in terms of first and second derivatives of the kinematic describing function. The system equations of motion for the full vehicle dynamic model are systematically derived by using velocity transformation method of multi-body dynamics. The comparison of field test results and simulation results of the ADAMS/Car demonstrates the validity of the proposed functional suspension modeling method. This model is suitable for real-time vehicle dynamics analysis.

• Journal of Applied Biological Chemistry
• /
• 제42권4호
• /
• pp.180-185
• /
• 1999

Protein concentrate was produced and succinylated from rice bran to assess and improve its functional properties for the purpose of expanding the uses of rice bran proteins. The most effective solvent for the extraction of rice bran proteins was 20% aqueous ethanol at pH 9. The protein content of rice bran protein concentrate produced was 70.0% and the total protein yield was 64.3%. The extent of succinylation of free amino groups in the modified products was 72.8%. Though the modified protein products showed good functional properties including solubility, emulsion properties, and oil absorption capacity, it did not form gel. Succinylation improved solubility and emulsion and gelling properties. These improvements in functionality will enhance the value of rice bran proteins, thus enabling them to be more competitive with other food proteins.

• 전기학회논문지P
• /
• 제63권4호
• /
• pp.226-235
• /
• 2014

Nowadays, railroads are considered the most efficient form of mass transportation. Furthermore, it is necessary that railroads be paired with state-of-the-art safety equipment. Unfortunately, it is impossible to prevent 100% of accidents that may be caused by system or human errors. In order to prevent future accidents, RAMS activity and Functional Safety Certification are required for new systems that are under development. In this paper we evaluate the necessity of the application of RAMS and the performance of RAMS in the system development process. We also explore the Safety Evaluation Procedure required for RAMS certification.

• 대한환경공학회지
• /
• 제29권3호
• /
• pp.357-364
• /
• 2007

본 연구는 폐타이어의 재활용 일환으로 기존의 분말 화된 폐타이어 표면에 특정의 Functional group을 형성시켜 수중의 중금속이온들 과의 Chelate complexes 형성을 유도 함으로서 중금속 제거제로서의 폐타이어 활용방안을 제시 하고자 하였다. 이를 위해 FT-IR을 통하여 Function리 group의 종류 및 XRD, XRF, SEM 용출실험을 통해 개질 변화된 폐타이어 특성 분석하였으며 Kinetics Study를 통해 흡착모델에 적용하여 특정상수 값을 도출 하였다. 결과적으로 중금속 흡착 선호도는 $Pb^{2+}>Cu^{2+}>Cd^{2+}$순으로 확인되었으며, 초기 30분 이내에 흡착평형에 도달 하였고, 흡착반응속도 또한 0.27에서 $1.78\sim3.15(g/mg{\cdot}min)$로 증가하였으며, 80% 이상의 제거효율을 보였다. 이는 기존의 분말폐타이어에 비해 그 효율이 10배가량 증가함을 알 수 있었으며, Functional group을 활용한 폐타이어를 이용할 경우 중금속제거제로서의 뛰어난 효율성을 제시 할 수 있었다.

• 대한치과보철학회지
• /
• 제21권1호
• /
• pp.59-66
• /
• 1983

Distal extension partial dentures are supported by both the relatively rigid teeth and the resilient mucosa. So impression techniques of residual alveolar ridge in case of distal extension partial denture have particular importance in order to broad distribution of the masticatory force. McLean recognized the need for recording the tissues supporting distal extension partial denture base in functional form to equalize the resilient and non-resilient support, and this was called functional impression. Many investigators proposed various techniques of the functional impression for a distal extension partial denture, but only a little studies were performed about displacement of soft tissue under distal extension partial denture base. The purpose of this study is to investigate the amount of vertical displacement of the soft tissue under distal extension partial denture base by different functional impression techniques. Impression techniques used were Z.O.P. Impression, Selective Tissue Placement Impression, Functional Relining Impression. Measurement of the vertical displacement of soft tissue were made with Depth Gauge and Measuring Platform. A Anatomic Impression was used as a control. The results were tested statistically using 3 way ANOVA and Scheffe test. The followings were the results obtained from this study. 1. The greatest amount of soft tissue displacement was observed in the center of the retromolar pad. 2. No significant differences were found between the crest of alveolar ridge and the buccal shelf area. 3. The greatest soft tissue displacement was observed in Functional Relining Impression using Iowa wax, and the least displacement was observed in Selective Tissue Placement Impression using murcaptan rubber base. 4. No significant differences were found between finger pressure and biting pressure in Z.O.P. Impression, but greater displacement was observed by biting pressure than finger pressure in Functional Reling Impression.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.584-592
• /
• 2012

Room temperature powder spray in vacuum process, so called Aerosol deposition (AD) is a room temperature (RT) process to fabricate thick and dense ceramic films, based on collision of solid ceramic particles. This technique can provide crack-free dense thin and thick films with thicknesses ranging from sub micrometer to several hundred micrometers with very fast deposition rates at RT. In addition, this technique is using solid particles to form the ceramic films at RT, thus there is few limitation of the substrate and easy to control the compositions of the films. In this article, we review the progress made in synthesis of piezoelectric thin/thick films, multi-layer structures, NTC thermistor thin/thick films, oxide electrode thin films for actuators or sensor applications by AD at Korea Institute of Materials Science (KIMS) during the last 4 years.

• 여성건강간호학회지
• /
• 제11권1호
• /
• pp.58-66
• /
• 2005

Purpose: The purpose of this study was to identify the patterns of activities of daily living (ADL) functional status and to examine the relationships between sense of coherence(SOC), depression, and uncertainty in gynecologic cancer patients who were receiving chemotherapy. Method: A prospective, longitudinal design with repeated measures was utilized. Women reported depression, SOC, and uncertainty at the beginning of the first cycle of chemotherapy, and they recorded ADL functional status everyday for two consecutive treatment cycles. the The instruments used were the Karnofsky Performance Status Index, Orientation to Life Questionnaire, Beck Depression Inventory, and Mishel Uncertainty in Illness Scale-Adult Form. Result: Data from 42 women showed that the ADL functional status during the second cycle was better than that of the first cycle with significant improvement each week. However, it did not completely recover to the baseline level even three weeks after the treatment ended in both cycles. SOC was correlated with depression(r=-.64, p<.001) and uncertainty(r=-.62, p<.001). Uncertainty was related to depression (r=.66, p<.001) and to functional status during the second cycle(r=-.45, p<.05), while the scores of the functional status during the two cycles were not related. Conclusion: Changing patterns and level of functional status during the treatment phase would be useful information for cancer patients to prepare coping strategies for positive health outcomes.