• 제목/요약/키워드: Functional acrylate

검색결과 66건 처리시간 0.024초

UV-curable Acrylate/Alkyd Resin 혼합계의 경화특성 II (Curing Properties of UV-ccurable Acrylate/Alkyd Resin Blends II)

  • 남수용;이경옥;대평태문;구철회
    • 한국인쇄학회지
    • /
    • 제18권1호
    • /
    • pp.157-166
    • /
    • 2000
  • UV-curable resins have adventages of quick set, space saving, clean environment, and efficient use of energy. The polymerization induced phase separation has been studied to solve the problem in UV-curing of thick films and develop the new functional materials. On the exposure to UV irradiation, the dynamic elasticity properties were mesured for mixtures of alkyd resin and UV-cruable monomers which have different molecular structures and molecular weights. The curing rate increases with increasing temperature and UV intensity. In addition, The gel point is strongly influenced by temperature and UV intensity

  • PDF

광경화성 아크릴 수지의 경화특성에 관한 연구 (Study on the Curing Properties of Photo-curable Acrylate Resins)

  • 김성현;장현석;박선희;송기국
    • 폴리머
    • /
    • 제34권5호
    • /
    • pp.469-473
    • /
    • 2010
  • 광경화성 수지인 아크릴레이트의 경화 특성과 메카니즘에 대하여 Photo-DSC와 FTIR, Raman spectrometer를 이용하여 조사하였다. 아크릴레이트 종류, 관능기 수, 광 세기 등에 따른 경화 속도에 관한 정보는 시간에 따른 Photo-DSC curve에서 계산하였고, FTIR과 Raman을 이용하여 경화 반응의 전환율과 반응 메카니즘을 조사하였다. 광경화 반응에서 산소의 영향을 알아보기 위하여 아크릴레이트 수지와 thiol-ene 수지의 경화과정을 비교하였는데, 공기 중 산소가 아크릴레이트의 라디칼 반응에서 금지제로 작용하여 아크릴레이트 수지는 80% 이하의 전환율을 보인 반면 thiol-ene 수지는 산소가 반응에 영향을 미치지 않는 것을 알 수 있었다.

연속적 Seed 유화중합법에 의한 마이크론 크기의 Poly(n-Butyl Acrylate) 라텍스입자 제조 (Preparation of Micron Size Poly(n-Butyl Acrylate) Latex Particle by Sequential Seeded Emulsion Polymerization)

  • 김지훈;서숭혁;남완우;김경찬;강신원;하기룡
    • 공업화학
    • /
    • 제10권6호
    • /
    • pp.889-894
    • /
    • 1999
  • 유화중합법으로 마이크론 크기의 고분자 라텍스 입자 제조시, 라텍스 입자의 응집, 2세대 입자의 생성 등의 문제 때문에 원하는 형태, 크기, 구조를 지니는 입자를 제조하기가 매우 어려운 것으로 알려져 있지만 구조적, 기능적 고분자 미립자를 합성할 수 있는 장점이 있다. 따라서, 본 연구에서는 마이크론 크기의 라텍스 입자를 제조하는데 있어서, 미립자 성분으로 n-butyl acrylate(BA)를 선정하고, 개시제의 농도, 유화제의 양, 반응 온도, 가교제의 양 및 교반기의 속도 등의 반응 변수 조건에 따른 seed 유화 중합을 실시하여 각 반응 변수들이 입자의 크기 및 분산도에 미치는 영향에 대하여 조사하였다. 실험 결과를 바탕으로 반응 변수의 최적 조건들을 규명하여 연속적 seed 유화중합법으로 $0.14{\sim}3.67{\mu}m$의 평균 입자경을 갖는 poly(n-butyl acrylate)(PBA) 라텍스 입자를 제조할 수 있었다.

  • PDF

MMA/BA 합성 라텍스 혼입 폴리머 시멘트 모르타르의 세공성상 (Porosity of Polymer-Modified Mortars Using Methylmethacrylate-Butyl Acrylate Latexes with Various Monomer Ratios)

  • 형원길;송해룡;김완기;소양섭
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.87-92
    • /
    • 2002
  • At present, the polymer-modified mortars are used as high-performance as well as multi-functional materials in the construction industry. The purpose of this study is to synthesize polymer to modify in cement mortars and make test samples to understand pore size distribution. This paper deals with the effect of monomer ratio on the typical properties of polymer-modified mortars using Methylmethacrylate-Butyl Acrylate(MMA/BA) latexes synthesized through emulsion polymerization. From the results, we knew that the pore volume of polymer-modified mortars using Methylmethacrylate-Butyl Acrylate latexes at bound MMA contents of 70 and 60 percent is 7.5-75cm$^3$/g and the fine pore volume is increased with an increase in the polymer-cement ratio. The total pore volume of polymer-modified mortars using MMA/BA latexes is linearly reduced with an increase in the bound MMA content and increased in the polymer-cement ratio.

  • PDF

The Coating Performance of UV Curable Urethane Acrylate Coatings for Fancy Veneer Overlayed Plywood Flooring

  • Lee, Byoung-Hoo;Kim, Hyun-Joong;Lee, Young-Kyu
    • Journal of the Korean Wood Science and Technology
    • /
    • 제32권6호
    • /
    • pp.23-35
    • /
    • 2004
  • The goal of study was to investigate the influence of the acrylated urethane oligomer on mechanical properties, the chemical resistance and thermal resistance of the UV curable urethane acrylate coatings for fancy veneer overlayed plywood flooring. The pencil hardness and abrasion resistance of the coated fancy veneer overlayed plywood floorings increased with increasing the acrylate functionality of the acrylated urethane oligomer. In the case of the UV cured film containing hexa-functional acrylated aliphatic urethane oligomer, high discoloration of the coated fancy veneer overlayed plywood flooring was observed near the cracks at the beginning of the chemical treatment. In this study, it was found that the degradation of the UV cured film caused by an alkaline reagent was higher than that of the UV cured film caused by an acidic treatment.

실란기가 도입된 폴리우레탄 아크릴레이트 합성 및 자외선 경화 특성 분석 (Synthesis of Silane Group Modified Polyurethane Acrylate and Analysis of Its UV-curing Property)

  • 김정수
    • 접착 및 계면
    • /
    • 제22권3호
    • /
    • pp.98-105
    • /
    • 2021
  • 본 연구에서는 실란기가 도입된 UV 경화형 우레탄 아크릴레이트를 사용하여 투명성 및 접착성/이형성을 갖춘 silver nanoparticle 전사용 접착 조성물을 제조하였다. Silver nanoparticle이 PET 위에 패터닝되어 있는 Ag/PET 필름과 전사 대상인 PC필름 사이에 제조한 접착 조성물을 도포하고 UV로 광경화한 후, PET를 제거하여 Ag/PC 필름을 제조하였다. 실란기가 도입된 UV 경화형 우레탄 아크릴레이트는 polycaprolactone diol (PCL)과 isophrone diisocyanate (IPDI), 2-hydroxyethyl methacrylate (HEMA), (3-aminopropyl)triethoxysilane (APTES)를 사용하여 합성하였다. APTES의 실란기는 특수 처리된 Ag표면과 반응하여 계면접착력이 개선될 수 있으며, 실란기가 도입된 우레탄 아크릴레이트와 희석제로 투입하는 기능성 아크릴 희석제에 의하여 PC필름과의 접착력을 향상시켰다. 우레탄 아크릴레이트 합성은 FT-IR을 이용하여 분석하였으며, APTES의 몰비와 아크릴 희석제 조성에 따라, 접착 특성과 광학 특성, 전사 특성 등을 비교하였다. 결과적으로, PUA2S1_0.5의 조건으로 제조된 접착 조성물에서 가장 우수한 전사 특성을 확인하였다.

PET 필름용 UV 경화 플로로글루시놀계 아크릴레이트 제조 및 물성 (Preparation and Properties of UV Curable Phlorogulcinol Based Acrylate for PET Film)

  • 최전모;이은영;김상용;조진구;김백진;이상협;김현중
    • 접착 및 계면
    • /
    • 제11권2호
    • /
    • pp.50-56
    • /
    • 2010
  • PET 필름은 핸드폰이나 디스플레이 패널, 노트북 등과 같은 산업전반에 걸쳐 널리 사용 된다. 최근 PET 필름 표면에 부착되는 ITO 표면은 높은 연필 경도와 높은 굴절도 등을 필요로 하기에 본 연구에서는 터치패널용 소자에 쓰이는 PET 필름의 코팅소재로 사용하기 위한 코팅소재를 개발하기 위하여 폐 TNT로부터 추출한 플로로글루시놀(phloroglucinol)을 이용하여 아크릴과 에폭시 형태의 다관능성 모노머를 합성하였다. 다관능성 모노머는 $^1H$ NMR과 FT-IR을 이용하여 구조확인을 하였으며, 다관능성 모노머의 화학구조에 따른 광굴절도, 광투과도, 그리고 표면 경도를 평가하였다. 합성된 다관능성 모노머는 연필 경도 1~3 H의 높은 특성을 나타내었으며, 광굴절도는 1.54~1.57, 광투과도는 93% 이상을 나타내었다.

Polarizing Group Attached Acrylates and Polymers Viewing High Refractive Index

  • Kwon, Ji-Yun;Kim, Bong-Gun;Do, Jung-Yun;Ju, Jung-Jin;Park, Seung-Koo
    • Macromolecular Research
    • /
    • 제15권6호
    • /
    • pp.533-540
    • /
    • 2007
  • We designed and successfully synthesized UV curable, functional acrylate monomers having a polarizing group, i.e., an electron-withdrawing and/or electron-donating group for the optical materials of high refractive index. Optical polymer films made from the functional methacrylate monomers were achieved with photo crosslinking under UV illumination. A monomer having amino and cyano groups (Dimer-CN) exhibited the highest refractive index ($n_{TE}$=1.595 at 850nm) among the studied methacrylate derivatives, due to the large polarizability of the dipolar monomer structures with electron-donating and withdrawing groups. By controlling the compositions of the functional acrylate monomer of copolymers, the refractive indices of the polymers were readily adjusted within a wide range of 1.498-1.595. The copolymers showed a high glass transition temperature $(T_g)$ and good thermal stability, which are desirable for optical applications. $T_g$ and $T_{10%}$ (10%-weight loss occurred) of the copolymers ranged from $120-140^{\circ}C$ and from $329-387^{\circ}C$, respectively.

4,4'-Thiodibenzenethiol을 이용한 광경화형 에폭시 아크릴레이트 합성과 굴절률에 관한 연구 (Synthesis of UV Curable 4,4'-Thiodibenzenethiol-based Epoxy Acrylate and Their Refractive Index Behavior)

  • 백승석;이상원;황석호
    • 폴리머
    • /
    • 제37권1호
    • /
    • pp.121-126
    • /
    • 2013
  • 4,4'-Thiodibenzenethiol을 기반으로 이관능 에폭시 수지인 4,4'-thiodibenzenethiol diglycidyl ether를 직접합성법으로 합성하였다. 합성된 에폭시 수지가 광경화가 가능하도록 acrylic acid와 반응시켜 광경화형 고굴절 이관능 에폭시 아크릴레이트인 4,4'-thiodibenzenethiol diglycidyl ether diacrylate를 합성하였으며 $^1H$ NMR과 FTIR을 이용하여 화학구조를 확인하였다. 이관능 에폭시 아크릴레이트와 함께 반응성 희석제인 2-phenoxythiol ethyl acrylate를 5, 10, 15, 20, 30 wt% 희석하여 점도와 굴절률과의 상관관계를 확인하였으며 광경화 후 경화필름의 굴절률 변화를 고찰 하였다. 반응성 희석제의 농도가 증가함에 따라 경화물의 경화도가 낮아졌으며, 경화도가 클수록 경화 후 굴절률은 높아지는 경향을 확인하였다.