• Journal of the Korea Safety Management & Science
• /
• v.12 no.1
• /
• pp.51-57
• /
• 2010

Cycling that transform human energy into mechanical energy is one of the man-machine systems out of sports fields. Benchmarking means "improving ourselves by learning from others', therefore benchmarking toward dominant cyclist is necessary on field. The goals of this study were to provide important factors on multi-disciplines (kinematics, physiology, power, psychology) for a tailored-training program that is suitable to individual characteristics. Two cyclists participated in this study and gave consent to the experimental procedure. One was dominant cyclist (years: 21 yrs, height: 177 cm, mass: 70 kg), and the other was non-dominant cyclist (years: 21, height: 176, mass: 70). Kinematic data were recorded using six infrared cameras (240Hz) and QTM (software). Physiological data (VO2max, AT) were acquired according to graded exercising test with cycle ergometer and power with Wingate test used by Bar-Or et. al (1977) and to evaluate muscle function with Cybex. Psychological data were collected with competitive state anxiety inventory (CSAI-2) that was devised by Martens et. al (1990) and athletes' self-management questionnaire (ASMQ) of Huh (2003). It appears that the dominant's CV of ankle joint angle was higher than non-dominant's CV and dominant's pedaling pattern was consistent in biomechanics domain, which the dominant's values for all factors ware higher than non-dominant's values in physical, and physiological domain, and their values between cognitive anxiety and somatic anxiety were contrary to each other in psychology. Further research on multi-disciplines may lead to the development of tailored-optimal training programs applicable with key factors to enhance athletic performance by means of research including athlete, coach and parents.

• Tribology and Lubricants
• /
• v.36 no.2
• /
• pp.68-74
• /
• 2020

In this study, the effect of the shape error of a guideway on the movement of a stage that uses an air bearing is analyzed. The shape error of moving parts supported by the air bearing is known not to affect the vibrations of moving parts as much as the magnitude of the shape error. This is called the "averaging effect." In this study, the effect of shape error on a guideway, as well as the averaging effect of an air-bearing system, is analyzed theoretically using a dynamic-analysis program. The dynamic-analysis program applies a commercially available code in COMSOL and solves the Reynolds equation between the stage and the guideway, along with the equation of motion of the stage. The stage is modeled as a two-degree-of-freedom system. The shape error is applied to the film thickness function in the form of a sine wave. The stage movement is analyzed using the fast Fourier transform process. The eccentricity and tilting are found to be proportional to the amplitude of the shape error of the guideway. Stage vibrations are less than 10% of the amplitude of the shape error on the guideway. This means that the averaging effect of the air bearing is verified quantitatively. Moreover, if the air supply position matches the shape error in the guideway, there is a notable change in eccentricity and tilting.

• Wind and Structures
• /
• v.18 no.6
• /
• pp.693-715
• /
• 2014

Stochastic processes are used to represent phenomena in many diverse fields. Numerical simulation method is widely applied for the solution to stochastic problems of complex structures when alternative analytical methods are not applicable. In some practical applications the stochastic processes show non-Gaussian properties. When the stochastic processes deviate significantly from Gaussian, techniques for their accurate simulation must be available. The various existing simulation methods of non-Gaussian stochastic processes generally can only simulate super-Gaussian stochastic processes with the high-peak characteristics. And these methodologies are usually complicated and time consuming, not sufficiently intuitive. By revealing the inherent coupling effect of the phase and amplitude part of discrete Fourier representation of random time series on the non-Gaussian features (such as skewness and kurtosis) through theoretical analysis and simulation experiments, this paper presents a novel approach for the simulation of non-Gaussian stochastic processes with the prescribed amplitude probability density function (PDF) and power spectral density (PSD) by amplitude modulation and phase reconstruction. As compared to previous spectral representation method using phase modulation to obtain a non-Gaussian amplitude distribution, this non-Gaussian phase reconstruction strategy is more straightforward and efficient, capable of simulating both super-Gaussian and sub-Gaussian stochastic processes. Another attractive feature of the method is that the whole process can be implemented efficiently using the Fast Fourier Transform. Cases studies demonstrate the efficiency and accuracy of the proposed algorithm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.621-628
• /
• 2017

The efficiency of implementation of the arithmetic operations in finite fields depends on the choice representation of elements of the field. It seems that from this point of view normal bases are the most appropriate, since raising to the power 2 in $GF(2^n)$ of characteristic 2 is reduced in these bases to a cyclic shift of the coordinates. We, in this paper, introduce our algorithm to transform fastly the conventional bases to normal bases and present the result of H/W implementation using the algorithm. We also propose our algorithm to calculate the multiplication and inverse of elements with respect to normal bases in $GF(2^n)$ and present the programs and the results of H/W implementations using the algorithm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.89-95
• /
• 2008

In the maritime communication, Orthogonal Frequency Division Multiplexing (OFDM) communication terminal should be operated with low power consumption, because the communication should be accomplished in the circumstance of disaster. Therefore, Low power FFT processor is required to be designed with current mode signal processing technique than digital signal processing. Current- to-Voltage Converter (IVC) is a device that converts the output current signal of FFT processor into the voltage signal. In order to lessen the power consumption of OFDM terminal, IVC should be designed with low power design technique and IVC should have wide linear region for avoiding distortion of signal voltage. To design of one-chip of the FFT LSI and IVC, IVC should have a small chip size. In this paper, we proposed the new IVC with wide linear region. We confirmed that the proposed IVC operates linearly within 0.85V to 1.4V as a function of current-mode FFT output range of -100~100[uA]. Designed IVC will contribute to realization of low-power maritime data communication using OFDM system.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1307-1316
• /
• 1996

In this paper, we propose a vector quantization method which uses a dynamic address mapping based on exploring the high interblock correlation. In the proposed method, we reduce bit-rate by defining an address transform function, which maps a VQ address of an input block which will be encoded into a new address in the reordered codebook by using side match error. In one case that an original address can be transformed into a new transformed address which is lower than the threshold value, we encode the new address of the transformed convector, and in the other case we encode the address of the original convector which is not transformed. Experimental results indicate that the proposed scheme reduces the bit-rate by 45~50% compared with the ordi-nary VQ method forimage compression, at the same quality of the reconstructed image as that of the ordinary VQ system.

• Phonetics and Speech Sciences
• /
• v.5 no.4
• /
• pp.217-225
• /
• 2013

This paper describes the design and implementation of the kWebAnywhere system based on WebAnywhere, which assists people with severely diminished eye sight and the blind people to access Internet information through Web interfaces. The WebAnywhere is a server-based web reader which reads aloud the web contents using TTS(text-to-speech) technology on the Internet without installing any software on the client's system. The system can be used in general web browsers using a built-in audio function, for blind users who are unable to afford to use a screen reader and for web developers to design web accessibility. However, the WebAnywhere is limited to supporting only a single language and cannot be applied to Korean web contents directly. Thus, in this paper, we modified the WebAnywhere to serve multiple language contents written in both English and Korean texts. The modified WebAnywhere system is called kWebAnywhere to differentiate it with the original system. The kWebAnywhere system is modified to support the Korean TTS system, VoiceText$^{TM}$, and to include user interface to control the parameters of the TTS system. Because the VoiceText$^{TM}$ system does not support the Festival API used in the WebAnywhere, we developed the Festival Wrapper to transform the VoiceText$^{TM}$'s private APIs to the Festival APIs in order to communicate with the WebAnywhere engine. We expect that the developed system can help people with severely diminished eye sight and the blind people to access the internet contents easily.

• Geomechanics and Engineering
• /
• v.19 no.5
• /
• pp.463-472
• /
• 2019

The mode perturbation method (MPM) is suitable and efficient for solving the eigenvalue problem of a nonuniform soil deposit whose property varies with depth. However, results of the MPM do not always converge to the exact solution, when the variation of soil deposit property is discontinuous. This discontinuity is typical because soil is usually made up of sedimentary layers of different geologic materials. Based on the energy integral of the variational principle, a new mode perturbation method, the energy-based mode perturbation method (EMPM), is proposed to address the convergence of the perturbation solution on the natural frequencies and the corresponding mode shapes and is able to find solution whether the soil properties are continuous or not. First, the variational principle is used to transform the variable coefficient differential equation into an equivalent energy integral equation. Then, the natural mode shapes of the uniform shear beam with same height and boundary conditions are used as Ritz function. The EMPM transforms the energy integral equation into a set of nonlinear algebraic equations which significantly simplifies the eigenvalue solution of the soil layer with variable properties. Finally, the accuracy and convergence of this new method are illustrated with two case study examples. Numerical results show that the EMPM is more accurate and convergent than the MPM. As for the mode shapes of the uniform shear beam included in the EMPM, the additional 8 modes of vibration are sufficient in engineering applications.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.8
• /
• pp.84-93
• /
• 1999

Determination of grain size of heat-treated stainless steel based fm digital ultrasonic signal processing technique is presented. This techniques consist in evidence accumulation with multiple feature parameters, difference absolute mean value(DAMV), variance(VAR), mean frequency (MEANF), auto regressive model coefficient(ARC) and linear cepstrum coefficient(LCC). Feature parameters were extracted from ultrasonic echo signal of heat-treated metals. It was found that a few parameters might not be sufficient to exactly evaluate the grain size of heat-treated metals. The determination of grain size of heat-treated metals was carried out through the evidence accumulation procedure using the distances measured with reference parameters. A fuzzy mapping function is designed to transform the distances for the application of the evidence accumulation method. In the work presented, heat-treated stainless steel samples with various grain sizes are examined. The processed experimental results supports the feasibility of the grain size determination technique presented.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.5
• /
• pp.400-409
• /
• 2004

In this paper. a voice personality transformation method is proposed. which makes one person's voice sound like another person's voice. To transform the voice personality. vocal tract transfer function is used as a transformation parameter. Comparing with previous methods. the proposed method makes transformed speech closer to target speaker's voice in both subjective and objective points of view. Conversion between vocal tract transfer functions is implemented by classification of entire vector space followed by linear transformation for each cluster. LPC cepstrum is used as a feature parameter. A joint classification and transformation method is proposed, where optimum clusters and transformation matrices are simultaneously estimated in the sense of a minimum mean square error criterion. To evaluate the performance of the proposed method. transformation rules are generated from 150 sentences uttered by three male and on female speakers. These rules are then applied to another 150 sentences uttered by the same speakers. and objective evaluation and subjective listening tests are performed.