• Management Science and Financial Engineering
• /
• v.11 no.3
• /
• pp.125-136
• /
• 2005

As the importance of time-based competition is increasing, information systems for supporting the immediate decision making is strongly required. Especially high -tech product firms are under extreme pressure of rapid response to the demand side due to relatively short life cycle of the product. Therefore, the objective of our research is proposing a framework of estimating demand curve based on e-auction data, which is extremely easy to access and well reflect the limited demand curve in that channel. Firstly, we identify the advantages of using e-auction data for full demand curve estimation and then verify it using Agent-Eased-Modeling and Tobin's censored regression model.

• Animal cells and systems
• /
• v.16 no.2
• /
• pp.135-144
• /
• 2012

$Dendronephthya$ $castanea$ Utinomi, 1952 is a member of the family Nephtheidae, and dominates shallow waters adjacent to the southern part of Jejudo Island, Korea. This species is a gonochoric internal brooder with a sex ratio of 1:1, and releases planulae around the time of the full and new moon from July to September, when the seawater temperature peaks. The gametogenic cycle is annual, and oogenesis (12 months) is longer than spermatogenesis (4-5 months). No difference in reproductive features including sexuality, sex ratio, gametogenesis and gametogenic cycles was found between the sympatric species $D.$ $castanea$ and $D.$ $gigantea$, and there was no temporal reproductive isolation. Investigation of the morphological taxonomy and molecular biology of these species indicates that they have very similar or identical traits, suggesting an absence of speciation and a need for taxonomic reclassification.

• Journal of the Korean housing association
• /
• v.11 no.1
• /
• pp.115-124
• /
• 2000

The purpose of this research is to examine residents' needs for shared community spaces and to explore the relationships between these needs and characteristics of consumers such as age and employment status of the homemakers, family life cycle stage, occupation of the primary income provider, housing size, and homeownership. Statistical data were compiled to determine frequencies and percentage distributions, and subjected to General Linear Model and Duncan-test analysis.Most residents wanted to utilize the basements of their complexes for storage space. Further interest was shown for shared community spaces that would be run by residents themselves, such as vegetable gardens, indoor playgrounds for children, senior citizen's activity rooms, walking paths, study rooms, and lounges. Female residents under 45 years old were likely to express needs for storage spaces for bicycle, and multipurpose rooms for meetings and family events. Female residents with jobs were more likely to desire shared community spaces than full-time females residents were. These findings imply the need for consideration of diverse plans rather than uniform ones. This results can be usefully applied to develop new apartment housing for different social class residents.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.193-194
• /
• 2015

In this paper, the solid state pulsed power modulator developed in KERI, which is based on IGBT technologies are overviewed. During last ten years, several kinds of solid state modulators were developed in KERI such as IGBT stacks with step up transformer, full IGBT stack based marx generator, modified IGBT marx generator and high repetitive solid state modulator. Basic principle of the design is described and each pros and cons are compared. KERI's solid state pulsed power modulators has lot of advantages for industrial pulsed power application focused on everlasting life cycle and high repetitive, and shows superior arching protection ability.

• International Journal of High-Rise Buildings
• /
• v.11 no.4
• /
• pp.363-368
• /
• 2022

For taller buildings with unconventional architecture, refined structural systems or in geographical areas with high wind conditions, performance-based design can be seen as an enhanced design process and is either a supplement to, or alternative to a prescriptive code-based design. The ultimate goal of Performance-Based Wind Design (PBWD) is to result in a building that better addresses key goals of performance over the buildings full life cycle. Major innovations around the use of a PBWD approach include nonlinear dynamic analysis for wind design, limited inelasticity in the main wind force resisting system elements, and system-based performance criteria. This paper discusses potential considerations and benefits made when using a performance-based approach, in addition to the general practicality of use, for the structural design on a few key tall buildings.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.145-150
• /
• 2013

As a recent global trend, the majority of mega-size plant projects are delivered through EPC (Engineering, Procurement and Construction) contracts, where a single contract is awarded for engineering, procurement, and construction. Under this contracting mechanism, it is challenging for contractors to carry out the projects under traditional project management processes used in design-bid-build projects. A new EPC Plant, the POSCO Special Steel Plant in Changwon, was built successfully at the beginning of 2012 and it is currently in full-scale production. The project has encountered a number of major difficulties however, with some technical and managerial issues through its development process. As summarized in this paper, the authors (as project participants with the contractor) investigated it as a post construction analysis and recorded the Lessons-learned for future project management improvement.

• Journal of Energy Engineering
• /
• v.22 no.4
• /
• pp.338-346
• /
• 2013

The conventional lead acid battery is optimized for cranking performance of engine. Recently electric devices and fuel economy technologies of battery have influenced more deep cycle of dynamic behavior of battery. I also causes to reduce battery life-time. This study proposed that aging battery model is focused for increasing of battery durability. The stress factors of battery aging consist of discharge rate, charging time, full charging time and temperature. This paper considers the electrochemical kinetics, the ionic species conservation, and electrode porosity. For prediction of battery life cycle we consider battery model containing strong impacts, corrosion of positive grid and shedding. Finally, we validated that modeling results were compared with the accelerated thermal measurement data.

• Quality Improvement in Health Care
• /
• v.1 no.1
• /
• pp.56-65
• /
• 1994

Total quality management has been a focus of concern in recent years since some dissatisfaction with the results from implementation of quality assurance programs in the U.S. Many managerial methodologies and innovation guidelines from academic disciplines have been applied to promote TQM programs in the health field. This paper consists of two folds of aspects: firstly to examine TQM's managerial philosophy by comparing with the newly introduced managerial concepts in Business Reengineering; and then to introduce a method for an integrative way of process analysis, Entity Life-Cycle Diagram (ELCD) modeling. The analysis method was compared with Process Map, which is a well-known method for BR applications. To show effectiveness of ELCD modeling, a case of application was introduced using 'drug' as a target entity. With having TQM issues in mind, the result was reflected in designing Entity Relation Diagrams. The results of ELCD modeling turn out to be helpful in designing database related to quality monitoring, in that many monitoring check points can be identified in a systematic way and that queries cross-sectional over organizational boundaries can be generated with a consistent view focusing on the drug use as a single process. Full evaluation of the analysis method remains to be studied until the completion of the information system under construction. But as long as TQM is based on a process-oriented view and needs supports from information system, ELCD can be one of the appropriate choice as a tool for the process analysis.

• Journal of the Korean Society of Systems Engineering
• /
• v.12 no.1
• /
• pp.7-23
• /
• 2016

Plant engineering industry is considered as a key industry which will drive the future of Korea. However, Korean plant engineering companies have recently made huge losses in overseas businesses and the lack of engineering capability is pointed out as a main cause of this situation. Unlike Korean plant engineering companies, world leading engineering companies such as Flour and Bechtel have their own systems Engineering Standards/Guides ensuring successful fulfillments of the concept and basic design processes. An engineering standard for an organization is an essential means to shorten the time for engineering design, to maintain the engineering quality and to secure the engineering efficiency in the development of the complex system. Korean plant engineering companies'lack of engineering capability comes from the absence of the engineering standard. In the paper, we have developed a steel-making plant engineering standard based on a systems engineering standard. We chose both ISO/IEC/IEEE 15288 and NASA SE Handbook as main reference standards. First, we have introduced a life-cycle definition and a physical hierarchy of a general steel-making plant. Then we have introduced detailed engineering processes of each life-cycle stage. The full scope of the study was from the feasibility study to the basic design but in the paper, we have only introduced detailed engineering processes and exit criteria for the feasibility study and the concept design.

• Journal of Sericultural and Entomological Science
• /
• v.8
• /
• pp.51-62
• /
• 1968

This study was carried out to investigate the life cycle and the damage of Tricholyga sorbillans Wiedmann to silkworms(Bombyx mori L.). The results are summarized as follows. 1. This insect has 5 or 6 generations per year in Suwon area. 2. The egg, larval, and pupal stage are about 2, 8 and 18 days respectively. 3. The weather conditions considerably affect the life cycle, that is, the 3 rd generation is the shortest of all, lasting for 21 days and l4 hours, and the 5th generation is the longest for about 40 days. 4. The larvae come out of silkworm bodies, burrowing into the ground 3.5cm to 10.5cm in depth before changing into the pupae. 5. This insect does not overwinter as pupa, but seems to do as larva, parasiting on the field insects. 6. The damage of Tricholyga sorbillans Wiedmann to silkworm was 27.9％, it is so high that the silk worms could not be reared outside without a reasonable control method. 7. When the full-grown silkworm is parasited by one egg of these insects, there is not only enough possibility of spinning. but also without any effects of their larvae on the cocoon quality. 8. The damage of Tricholyga sorbillans Wiedmann throughout the country covers 6.36％ in spring, 4.09％ in fall, and 5.25％ yearly mean.