• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.41-42
• /
• 2006

A study on the combustion characteristics by using Emulsion Fuel in Diesel Engine is performed experimentally. In this paper, the experiments are performed at engine speed 1800rpm, emulsion fuel ratio is 0%, 10%, 20%, and main measured items are specific fuel consumption, pressure, ratio of pressure rise, rate of heat release etc. The obtained conclusions are as follows. 1) Specific fuel consumption increase maximum 19.8% at low load, but is not effected at full load. 2) Ratio of pressure rise and rate of heat release are about the same in the case of 10% and 20% of emulsion fuel ratio. 3) Cylinder Pressure increase 11.7%, ratio of pressure rise increase 60.4% in case of emulsion fuel ratio 20% at full load. 4) Rate of heat release increase 76.9% in case of emulsion fuel ratio 20% at full load.

• Journal of Periodontal and Implant Science
• /
• v.45 no.6
• /
• pp.210-215
• /
• 2015

Purpose: The aim of this retrospective study was to investigate the cumulative success rate, the implant survival rate, and the occurrence of biological complications in implants supporting full-arch immediately loaded rehabilitations supported by upright and tilted implants. Methods: The clinical records and periapical radiographs of patients who attended follow-up visits were collected, and information was recorded regarding marginal bone loss resorption, the occurrence of peri-implant infectious diseases, and the implant survival rate. Implants were classified as successful or not successful according to two distinct classifications for implant success. Results: A total of 53 maxillary and mandibular restorations including 212 implants were analysed, of which 56 implants were studied over the full five-year follow-up period. After five years, the cumulative success rate was 76.04% according to the Misch classification and 56.34% according to the Albrektsson classification. The cumulative implant survival rate was 100%, although one implant was found to be affected by peri-implantitis at the second follow-up visit. Conclusions: The cumulative success rate of the implants dropped over time, corresponding to the progression of marginal bone resorption. The prevalence of peri-implantitis was very low, and the implant survival rate was not found to be related to the cumulative success rate.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.97-103
• /
• 2014

In this paper, a clock-data recovery using a 1/8-rate phase detector is proposed. The use of a conventional full or half-rate phase detector requires relatively higher frequency of a recovered clock, which is a burden on the design of a sampling circuit and a VCO. In this paper, a 1/8-rate phase detector is used to lower the frequency of the recovered clock and a linear equalizer is used as a input circuit of a phase detector to reduce the jitter of the recovered clock. A test chip fabricated in a 0.13-${\mu}m$ CMOS process is measured at 1.5-GHz for a 3-Gb/s PRBS input and 1.2-V power supply.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8C
• /
• pp.762-768
• /
• 2005

This paper proposes new space-time block codes achieving full rate and full diversity for QAM and quasi-static Rayleigh fading channels when using any number of transmit antennas larger than 3 transmit antennas. These codes are constructed by serially concatenating the constellation rotating $precoders^{[4,5]}$ with the Alamouti scheme$3^{[3]}$ Bike the conventional A-ST-CR code$^{[6,7]}$. Computer simulations show that the proposed codes achieve approximately 1.3dB, 1.4dB and 1.5dB larger coding gains than the ST-CR $codes^{[4,5]}$ for QPSK with 3, 4 and 5 transmit antennas, respectively, and about 3dB for 16QAM with 3 transmit antennas.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1208-1217
• /
• 2019

The life-cycle prediction of the sub-module which is the unit system of MMC is very important from the viewpoint of maintenance and economic feasibility of HVDC system. However, the life-cycle prediction that considers only the type, number and combination of parts is a generalized result that does not take into account the operating condition of the sub-module, and may significantly differ from the life-cycle of the actual one. Therefore, we design a fault tree for the purpose of reflecting the operation characteristics of the full-bridge sub-module and apply the MIL-HDBK-217F to the failure rate of the basic event to predict the life-cycle of the full-bridge sub-module. It compares the life-cycle expectancy of the conventional failure rate analysis with the proposed fault-tree analysis and compares the lifetime according to whether the redundancy of the full-bridge sub-module is considered.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.10
• /
• pp.2411-2429
• /
• 2013

In this paper, we extend the case of information exchange error mitigation for the distributed orthogonal space-time block code (DOSTBC) for two transmit antennas to distributed quasi-orthogonal space-time block code (DQOSTBC) for four transmit antennas. A rate 1 full-diversity DQOSTBC for four transmit antennas is designed. The code matrix changes according to different information exchange error cases, so full diversity is maintained even if not all information exchange is correct. We also perform analysis of the pairwise error probability. The performance analysis indicates that the proposed rate 1 DQOSTBC outperforms rate 1/2 DOSTBC for four transmit antennas at the same transmission rate, which is confirmed by the simulation results.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.23 no.2
• /
• pp.77-79
• /
• 2014

There are several factors affected fractures of full contour zirconia (FCZ) dental prosthesis in laboratory process. First, residual moisture can cause zirconia cracks. Complete dry is requisite before zirconia sintering to prevent zirconia cracks. Second, slow cooling rate is essential to prevent cracks during zirconia sintering process. Cracks in bridge pontic area, thick dental implant prosthesis can be prevented by slow cooling rate such as 3 degree Celsius per minute during zirconia sintering. Third, slow heating rate and slow cooling rate during staining and glazing procedure is necessary to inhibit thermal shock of sintered dental zirconia. Lower preheat temperature of porcelain furnace is recommended. Finally, using diamond disc to open embrasure can lead cracks.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.110-119
• /
• 1996

A novel high speed VLSI architecture and its VLSI realization methodologies for a motion estimation processor based on full search block matching algorithm are presentd. The presented architecture is designed in order to be suitable for highly parallel and pipelined processing with identical PE's and adjustable in performance and hardware amount according to various application areas. Also, the throughput is maximized by enhancing PE utilization up to 100% and the chip pin count is reduced by reusing image data with embedded image memories. Also, the uniform and identical data processing structure of PE's eases VLSI implementation and the clock rate of external I/O data can be made slower compared to internal clock rate to resolve I/O bottleneck problem. The logic and spice simulation results of the proposed architecture are presented. The performances of the proposed architecture are evaluated and compared with other architectures. Finally, the chip layout is shown.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.3
• /
• pp.1156-1173
• /
• 2021

In this paper, we propose a new joint precoder and postcoder design strategy to support multiple streams per user in multiuser multiple-input multiple-output (MIMO) systems. We propose two step precoding strategies using equal channel gain decomposition and block diagonalization at the transmitter. With the proposed precoder, the multiuser MIMO channel can be decomposed into multiple parallel channels with equal channel gain per user. After applying receive postcoder which is generated and sent by the transmitter, we can use ML based decoder per stream to achieve full receive diversity. Achievable sum rate bound and diversity performance of the proposed algorithm are presented with feedback signaling design and quantitative complexity analysis. Simulation results show that the proposed algorithm asymptotically approaches to the sum rate capacity of the MIMO broadcast channel while maintaining full diversity order.

• Journal of the Korean Society for Library and Information Science
• /
• v.32 no.4
• /
• pp.69-86
• /
• 1998

The purpose of velop the indexing algorithm of secondary legal information by the study of characteristics of legal information, to compare the indexing system using controlled vocabulary to the indexing system using natural language in the secondary legal information full-text databases, and to prove propriety and superiority of the indexing system using controlled vocabulary. The results are as follows; 1)The indexing system using controlled vocabulary in the secondary legal information full-text databases has more effectiveness than the indexing system using natural language, in the recall rate, the precision rate, the distribution of propriety, and the faculty of searching for the unique proper-records which the indexing system using natural language fans to find 2)The indexing system which adds more words to the controlled vocabulary in the secondary legal information full-text databases does not better effectiveness in the retail rate, the precision rate, comparing to the indexing system using controlled vocabulary. 3)The indexing system using word-added controlled vocabulary with an extra weight in the secondary legal information full-text databases does not better effectiveness in the recall rate, the precision rate, comparing to the indexing system using word-added controlled vocabulary without an extra weight. This study indicates that it is necessary to have characteristic information the information experts recognize - that is to say, experimental and inherent knowledge only human being can have built-in into the system rather than to approach the information system by the linguistic, statistic or structuralistic way, and it can be more essential and intelligent information system.