• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.167-173
• /
• 2015

This paper presents a study on the Full-HD HEVC(High Efficiency Video Coding) encoder IP(Intellectual Property) design. The designed IP is for HEVC main profile 4.1, and performs encoding with a speed of 60 fps of full high definition. Before hardware and software design, overall reference model was developed with C language, and we proposed a parallel processing architecture for low-power consumption. And also we coded firmware and driver programs relating IP. The platform for verification of developed IP was developed, and we verified function and performance for various pictures under several encoding conditions by implementing designed IP to FPGA board. Compared to HM-13.0, about 35% decrease in bit-rate under same PSNR was achieved, and about 25% decrease in power consumption under low-power mode was performed.

• Clinics in Shoulder and Elbow
• /
• v.9 no.1
• /
• pp.83-88
• /
• 2006

Purpose: To evaluate the usefulness of arthroscopic decompression and miniopen repair that was related with large and massive sized full thickness rotator cuff tear and assess clinical result. Materials and Methods: Twenthy-nine cases of miniopen repaired full thickness tear of rotator cuffs that arthroscopically decompressed were studied. From October 1998 to December 2004 we have analysed 29 repairs of large and massive sized FTRCT, the average age 44 ($32{\sim}71$) years old, mean follow-up was 34 ($12{\sim}84$) months. We analyzed the results statistically by paired t-test. Results: Postoperative VAS of pain improved average 7.0 to 1.7, UCLA score improved 13.7 to 31.9, ADL improved 11.3 to 25.3 respectively (all, P=0.000). Twenty five cases(82.8%) of the patients showed excellent & good results at the final follow-up. The satisfied rate was 26 cases(89.7%). Conclusions: Arthroscopic decompression and miniopen repair in large and massive sized full thickness rotator cuff tears are effective surgical methods.

• Korean Journal of Materials Research
• /
• v.29 no.12
• /
• pp.818-824
• /
• 2019

In this study, the direct water quenching technique is applied to validate the applicability of direct water quenching as a cooling method in the hot stamping process of 3.2 mm thick boron steel sheet. Cooling performance of conventional die quenching and direct water quenching is compared. Higher cooling rate is obtained by hot stamping with direct water quenching compared to die quenching. As the flow rate of cooling water increases, the cooling rate increases, and a high cooling rate of 71 ℃/s is achieved under flow rate conditions of 0.8 L/min. Through direct water quenching, the cooling time required for sufficient cooling of the sheet is reduced. Full martensitic microstructure is obtained under flow rate condition of 0.8 L/min. Hardness increases with increasing flow rate. From these results, it is verified that the direct water quenching is applicable to the hot stamping of thick boron steel sheet.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.2
• /
• pp.104-111
• /
• 1997

The freezing phenomenon of saturated water with the supercooled region in a horizontal circular cylinder has been studied experimentally by using the holographic real time interferometry technique. From the experiments, it was found that there were three types of freezing patterns. The first is the annular ice layer growing from the cylinder surface at a high cooling rate; the next is the asymmetric ice layer at a moderate cooling rate; and the last is the instantaneous ice layer growth over the full region at lower cooling rate. As the water was coolde from room temperature to the subfreezing point passing through the density inversion point, the freezing pattern was largely affected by the inversion phenomenon, which had much effected the free convection and was susceptible to influences from the cooling rate. When the cooling rate is high, supercooling energy is released before the water is sufficientry mixed by free convection. On the other hand, when the cooling rate is low, there is much time for the water to be mixed by free convection. This seems to be the reason why the different ice layer growths occur.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.979-987
• /
• 2013

It is becoming increasingly difficult for colleges to recruit new students to their full capacity. The increase of the withdrawal rate drives these colleges into crisis yet little has been done about it, because students with great possibility to withdraw enter colleges and old measures to stop them from dropping out hardly work. This study attempts to grope new measures to prevent dropout from college. To do this, I investigated withdrawal rate by college admission types and suggested measures to reduce withdrawal rate by incorporating the results of the investigation into admission procedures. I also compared the different types of admission in students satisfaction with college life and withdrawal rate, and suggested the measures to alleviated withdrawal rate. I expect the suggestions made in this study would be used effectively to reduce the withdrawal in colleges.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.426-445
• /
• 2012

Conventional rate control (RC) schemes for H.264 video coding usually regulate output bit rate to match channel bandwidth by adjusting quantization parameter (QP) at fixed full frame rate, and the passive frame skipping to avoid buffer overflow usually occurs when scene changes or high motions exist in video sequences especially at low bit rate, which degrades spatial-temporal quality and causes jerky effect. In this paper, an active content adaptive frame skipping scheme is proposed instead of passive methods, which skips subjectively trivial frames by structural similarity (SSIM) measurement between the original frame and the interpolated frame via motion vector (MV) copy scheme. The saved bits from skipped frames are allocated to coded key ones to enhance their spatial quality, and the skipped frames are well recovered based on MV copy scheme from adjacent key ones at the decoder side to maintain constant frame rate. Experimental results show that the proposed active SSIM-based frameskip scheme acquires better and more consistent spatial-temporal quality both in objective (PSNR) and subjective (SSIM) sense with low complexity compared to classic fixed frame rate control method JVT-G012 and prior objective metric based frameskip method.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.1966-1973
• /
• 2023

Virtual reality technology has been widely used in the field of nuclear and radiation safety, dose rate computing in virtual environment is essential for optimizing radiation protection and planning the work in radioactive-controlled area. Because the CPU-based gamma dose rate computing takes up a large amount of time and computing power for voxelization of volumetric radioactive source, it is inefficient and limited in its applied scope. This study is to develop an efficient gamma dose rate computing code and apply into fast virtual simulation. To improve the computing efficiency of the point kernel algorithm in the reference (Li et al., 2020), we design a GPU-based computing framework for taking full advantage of computing power of virtual engine, propose a novel voxelization algorithm of volumetric radioactive source. According to the framework, we develop the GPPK(GPU-based point kernel gamma dose rate computing) code using GPU programming, to realize the fast dose rate computing in virtual world. The test results show that the GPPK code is play and plug for different scenarios of virtual simulation, has a better performance than CPU-based gamma dose rate computing code, especially on the voxelization of three-dimensional (3D) model. The accuracy of dose rates from the proposed method is in the acceptable range.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.262-269
• /
• 2013

This study was carried out in order to examine the germination characteristics of Ligularia fischeri seeds, and it was to develop the more efficient pre-treatment and production system of the seeds. It was performed by two ways - temperature control (10, 15, 20 and $25^{\circ}C$) and shading treatment (Full sunlight, 35%, 50%, 75% and 95% of full sunlight). Seed pre-treatment before the each experiment was carried out by temperature (with low temperature and wetting treatment (LTW) for 0, 15, 30, 45 and 60days) and shading treatment (with drying at room temperature (DRT), drying at low temperature (DLT) and water soaking (WS) for 2 days). Seeds of L. fischeri were, regardless of seed pre-treatment, germinated well at $10^{\circ}C$ and the more temperature went up, the more germination rate went down. As a result of surveying shading treatment, 75% shading with DRT was the highest germination rate (68.1%) and 95% shading with WS was the lowest germination rate (48.6%). It was showed over-growth under 95% shading treatment experiment and withered in the full sunlight. As a result of surveying the whole experiment, L. fischeri seeds pre-treated with LTW for 15 days germinated well at $10^{\circ}C$ and under 50~75% shading treatment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.645-652
• /
• 2000

A total of 80 piglets ($5.18{\pm}0.61kg$ of BW; 16 d of age) were fed experimental diets to evaluate the effect of extruded full-fat soybean (EFS) on the growth of eatly weaned pigs. Pigs were allotted into five treatments based on body weight, in a completely randomized block design. Each treatment has 4 replicates of 4 animals each. Treatments consisted of diets representing substitutional ratios of EFS for soybean meal. 1) 100:0 (SBM), 2) 75:25 (EFS 25), 3) 50:50 (EFS 50), 4) 25:75 (EFS 75) and 5) 0:100 (EFS 100). During phase I (d 0 to 7), piglets were fed diets containing 3,340 kcal ME, 26% crude protein, 1.85% lysine, 1.0% Ca and 0.9% P. For phase II (d 8 to 21), piglets were fed diets supplying 3,340 kcal ME, 23% crude protein, 1.65% lysine, 0.9% Ca and 0.8% P. Urease activity (pH rise) of EFS (0.18) was three times higher than that of SBM (0.06) indicating that processing conditions were not efficient enough to inactivate urease activity. During the first week postweaning, pigs fed SBM had significantly greater average daily gain (ADG), average daily feed intake (ADFI) and better feed conversion ratio (FCR) compared to pigs fed FFS diets. Linear negative effect on growth rate was found as the inclusion rate of FFS increased. During d 8 - 21 postweaning, piglets fed EFS 50 diet showed the best ADG and FCR despite no significant difference between treatment SBM and EFS 25 have been observed. Overall, piglets fed diets up to 50% FFS inclusion rate exhibited similar weight gain. Only piglets fed EFS 100 diet showed a significantly decreased growth rate. No other significant effect was found in feed intake and feed conversion ratio. At d 7, dry matter digestibility was higher in pigs fed SBM diet than piglets fed EFS 75 diet (p<0.05) and crude protein digestibility was higher in piglets fed SBM diet than piglets fed EFS 50, EFS 75 and EFS 100 (p<0.05). At d 21, no difference other than in phosphorus digestibility was detected. This indicates that piglets at 21 d postweaning are capable of utilizing nutrients from FFS. No treatment effects were detected in blood metabolites. The data suggests that piglets at 16 d of age are not sufficiently mature to use extruded FFS in their diets. Nevertheless, FFS seemed to be able to replace upto 50% of SBM in weaned piglet diet.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.2
• /
• pp.243-250
• /
• 2003

The extinction behavior and the unsteady response of augmented reduced mechanism(ARM) have been investigated by adopting an OPPDIF code and a numerical solver for the flamelet equations. By comparing the performance of the ARM based on Miller and Bowman's mechanism(MB-ARM) with that of the ARM based on GRI-Mech 3.0(GRI-3.0-ARM), it is identified that the MB-ARM is more suitable for the unsteady calculation because it is relatively less stiff than GRI-3.0-ARM during an ignition process. The steady results using the MB-ARM, which is modified to predict reasonably the extinction point of experiment, are in excellent agreement with those from full mechanism. Under the sinusoidal transient disturbances of scalar dissipation rate, the unsteady responses of the flame temperature and species concentrations using a modified MB-ARM show in very close agreement with those from full mechanism. It is presumed that above modified MB-ARM is very suitable for the unsteady simulation of turbulent flames because it gives not only a low computational cost but also a good prediction performance for flame structure, extinction point and unsteady response.