• 한국통신학회논문지
• /
• 제35권7A호
• /
• pp.639-645
• /
• 2010

In the paper, a selection relaying scheme is proposed and analyzed in which relays retransmit the erroneous packet without checking the correctness of their received packets. The proposal not only achieves the full diversity gain in a limited number of retransmissions but it also gets better performance than other schemes. Additionally, a threshold in the number of retransmissions and the closed form expression for packet error rate (PER) are derived. Simulation results are given to confirm the accuracy of analysis and to significantly prove advantages of the proposal.

• 한국수소및신에너지학회논문집
• /
• 제5권1호
• /
• pp.9-17
• /
• 1994

Activation behavior, hydriding rate and disintegration were studied for a compact in pellet form and hydrogen storage alloy particles treated with newly developed inorganic solution. Cylindrical disc of 12.95mm diameter and of 7.1mm thickness was prepared by compressing(8ton) a mixture of $MmNi_{4.5}Al_{0.47}$ and PTFE. Chemical treatment of particles with 1mol of solution was performed at room temperature for several hours until the pH of solution did not change. Chemical treatment made much accelerated activation without any incubation period which generally exists in the untreated alloys and the hydriding reaction rate after full activation also was improved.

• Journal of Electrical Engineering and Technology
• /
• 제1권1호
• /
• pp.98-100
• /
• 2006

ZnO thin films were deposited at different repetition rates of 5 Hz and 10 Hz by pulsed laser deposition. X-ray diffraction (XRD) full widths at half maximum (FWHMs) of (002) ZnO peak in ZnO thin film deposited at 5 Hz and 10 Hz was 0.22 and $0.26^{\circ}$, respectively. The grain size of ZnO thin film deposited at 5 Hz was larger than that of 10 Hz. The variation of repetition rates did not have an effect on the optical property of ZnO thin films. The degradation of the crystalline quality and surface morphology in ZnO thin film deposited at 10 Hz resulted from supersaturation effect by decrease of time interval between a ZnO particle arriving on a substrate by laser shot and a ZnO particle arriving on a substrate by next laser shot.

• ETRI Journal
• /
• 제28권1호
• /
• pp.17-30
• /
• 2006

In time division duplex (TDD) code division multiple access (CDMA) systems, chip-synchronous transmission in the uplink is obtainable, thus leading to free multiple access interference in flat Rayleigh fading channels plus additive white Gaussian noise. This motivates us to develop a novel cooperative transmission strategy that allows single-antenna devices to benefit from spatial diversity using orthogonal signature sequences. The proposed cooperation is applicable to many digital modulation methods and achieves the fullest diversity level, low implementation complexity, and a full data rate. Closed-form bit-error-rate expressions were also derived and compared to simulation results in order to evaluate its validity. A variety of numerical results demonstrated the cooperation's superiority over single transmission under the same transmit power constraint.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 제15회 음성통신 및 신호처리 워크샵(KSCSP 98 15권1호)
• /
• pp.3-11
• /
• 1998

정보통신 문화가 발달함에 따라 디지털 이동통신이나, 멀티미디어, 음성우편 시스템 등 음성을 이용한 여러 가지 새로운 산업들이 급속히 성장하고 있다. 이 중에서도 특히 디지털 이동통신분야에 대한 연구가 활발한데, 이는 디지털 시스템에서는 부호화기를 사용하여 음성신호를 압축하기 때문에 아날로그 시스템에 비해 패널 증대를 가져올 수 있기 때문이다. 이처럼 음성 부호화기는 실질적인 상업화와 매우 밀접한 관계를 갖고 있기 때문에 그에 대한 연구가 화발히 진행되고 있다. 본 논문에서는 먼저 일반적인 음성부호화 방법들에 대해 살펴본 다음에, 현재 디지털 셀룰라 시스템에서 사용하고 있는 full-rate 음성 부호화기 및 half-rate 음성 부호화기의 표준화 동향과 최근에 여러 응용분야에서 널리 사용되고 있는 음성 부호화기에 대해서 설명하기로 한다. 또한 ITU-T 의 표준화 동향 및 4kbps 이하의 전송률을 갖는 음성 부호화기의 연구추세에 대해서 살펴보기로 한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.601-604
• /
• 1999

We propose a new hierarchical motion estimator architecture that supports the advanced prediction mode of recent low bit-rate video coders such as H.263 and MPEG-4. In the proposed VLSI architecture, a basic searching unit (BSU) is commonly utilized for all hierarchical levels to make a systematic and small sized motion estimator. Since the memory bank of the proposed architecture provides scheduled data flow for calculating 8$\times$8 block-based sum of absolute difference (SAD), both a macroblock-based motion vector (MV) and four block-based MVs are simultaneously obtained for each macroblock in the advanced prediction mode. The proposed motion estimator gives similar coding performance compared with full search block matching algorithm (FSBMA) while achieving small size and satisfying the advanced prediction mode.

• Communications for Statistical Applications and Methods
• /
• 제16권6호
• /
• pp.1031-1036
• /
• 2009

Under recent dramatic declines in response rates, various procedures have been considered among survey practitioners to reduce nonresponse in order to avoid its potential impairment to the inference. In the random digit dialing telephone surveys, substantial efforts are often required to obtain the initial contact for the screener interview. To reduce a burden with higher data collection costs, refusal conversion can be administered only to a random portion of the sample, reducing nonresponse (bias) with an expense of sample variability increment due to the associated weight adjustment. In this paper, we provide ways to determine the optimal subsampling rate using a linear cost model. Our approach for refusal subsampling is to predetermine a random portion from the full sample and to apply refusal conversion efforts if needed only to the subsample.

• 소성∙가공
• /
• 제4권3호
• /
• pp.222-232
• /
• 1995

The planar anisotripic FEM analysis for predicting earing profiles and draw-in amounts in the deep-drawing process is introduced. An implicit, incremental, updated Lagrangian formulation with a rigid-viscoplastic constitutive equation is employed. Contact and friction are considered through the mesh-based unit vector and normal contact pressure. The consistent full set of governing relations, which is comprising euilbrium and geometric constraint equations, is appropriately linearized. Barlat's strain-rate potential is employed, whose in-plane anisotropic properties are taken into account with anisotropic coefficients and potential parameters. The linear triangular membrane elements are used for depicting the formed sheet. In the numerical simulations of deep drawing processes of a flat-top cylindrical cup for 2090-T3 aluminum alloy sheet show good agreement with experiments, although some discrepancies were observed in the directional trend of cup height and thickness strains.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 학술대회 논문집 전문대학교육위원
• /
• pp.116-119
• /
• 2001

In this research, we detect the charge state within $0.1{\sim}0.3[A]$ and develop the intelligent digital charge device by applying a fine pulse signal using PWM inverter and Proportional-Integral(PI) controller which uses micro -processor and intelligent technique. The ripple rate is within ${\pm}1%$, and the indicator error rate of full charge state is within ${\pm}1%$, and the voltage stability is within ${\pm}0.1[V]$, and the accuracy of voltage detect is 48[V] and ${\pm}0.5[V]$ in the reference of 100[A].

• 반도체디스플레이기술학회지
• /
• 제6권1호
• /
• pp.65-69
• /
• 2007

A design of experiments was applied in order to investigate the effect of processing variables in UV irradiation on the electrical/optical properties in indium-zinc oxide thin films, The processing variables, equivalently input variables are listed as UV irradiation time, oxygen flow rate, and chamber pressure. The statistical significance of Ultra Violet (UV) treatment was confirmed using a paired-t test. The full factorial $2^3$ design was employed to determine significant main and interaction effects in UV irradiation process. The chamber pressure and the interaction between UV irradiation time and $O_2$ flow rate were found to be statistically significant at the significance level of 0.1. Furthermore, the optimized approach was proposed in achieving the improved conductivity after UV irradiation.