• 제목/요약/키워드: Full Rate

검색결과 1,774건 처리시간 0.031초

산개나리의 생리적 활성에 대한 최적 광도 조건과 시비 효과 (Optimum Light Intensity and Fertilization Effects on Physiological Activities of Forsythia saxatil)

  • 김길남;한심희;김두현;윤충원;신수정
    • 한국산림과학회지
    • /
    • 제102권3호
    • /
    • pp.372-381
    • /
    • 2013
  • 본 연구는 산개나리의 현지 내 복원을 위한 최적 생육환경을 찾기 위하여, 광도 및 시비수준이 다른 환경에서 생육한 산개나리의 잎 특성 및 생리적 특성을 조사 및 분석하였다. 광도는 30%, 43%, 63%, 100%로 하는 4수준으로 하였고, 시비는 우리나라 평균산림토양 NPK 함량을 기준으로 무시비, 2배, 3배로 처리하였다. 산개나리의 잎 특성은 모든 피음 처리구에서 시비수준이 증가할수록 잎 면적은 뚜렷하게 증가하였고, 잎 건중량과 건중량 대 면적의 비는 시비수준이 증가할수록 감소하였다. 동일 시비수준에서는 광 증가와 함께 잎 면적이 감소하면서, 잎 건중량과 건중량 대 면적의 비는 증가하였다. 산개나리 잎 내 광색소 함량은 모든 피음 처리구에서 시비수준이 증가할수록 감소하였고, 같은 시비수준에서 잎 내 광색소 함량은 광이 증가할수록 높은 값을 보였다. 산개나리 잎 내 질소 함량은 모든 피음 처리구에서 무시비보다 시비 처리구에서 높은 값을 나타냈으며, 질소 함량에 대한 엽록소 함량의 비(Chl/N)는 시비량이 증가할수록 감소하였다. 광합성 속도는 전광의 63%와 전광 처리구에서 시비량이 증가할수록 높게 나타났으며, 암호흡 속도는 모든 피음 처리구에서 무시비보다 시비 처리구에서 낮은 값을 나타냈다. 또한, 순양자수율은 모든 피음 처리구에서 무시비보다 시비 처리구에서 높은 값을 나타냈으며, 동일 시비수준에서는 전광의 63% 처리구에서 가장 높은 값을 나타냈다. 결론적으로 산개나리의 잎 형태와 생리적 특성은 높은 광 조건 및 토양시비 처리를 통해 개선할 수 있다.

기온 상승에 따른 '신고' 배나무의 만개일 변동 예측 (Estimation of Changes in Full Bloom Date of 'Niitaka' Pear Tree with Global Warming)

  • 한점화;조광식;최장전;황해성;김창국;김태춘
    • 원예과학기술지
    • /
    • 제28권6호
    • /
    • pp.937-941
    • /
    • 2010
  • 기온 상승이 '신고' 배나무의 만개일에 미치는 영향을 조사하기 위해 배시험장의 시간별 기온자료로 발육지수를 산정하고, 기상청 관측자료에 있는 67개 지역의 최고 최저 온도에 의한 발육속도로 평년 만개일 분포 및 온도상승에 따른 만개일 변화를 추정하였다. 나주지역에서 '신고' 배나무의 발육지수는 0.9593이었다. 천안지역의 만개일 관측자료와 발육지수에 따른 예측자료와의 차이가 0-7일 범위였고, 일치한 해가 35.3%였다. 67개 지역의 평년 만개일은 4월 4일부터 5월 28일까지 분포하였다. 예측 만개일이 평년기온 보다 $5^{\circ}C$ 상승할 때까지 대부분의 지역에서 빨라졌지만 $3^{\circ}C$ 상승부터 남쪽의 해안가 지역에서 늦어졌으며, $4^{\circ}C$$5^{\circ}C$ 상승하면 제주, 고산(제주도 서부), 서귀포 지역에서는 개화되지 않는 것으로 추정되었다. 3월 기온 상승 시 예측 만개일의 변화가 가장 컸고, 4월, 2월, 1월 및 12월 순이었다. 기온상승에 따라 우리나라 배 재배 주산지의 만개일이 빨라질 것으로 전망되었다.

하악 대구치부위의 고정성 보철물에서 2개의 장폭경과 3개의 표준 임프란트의 비교 (The comparison between 2 wide implants and 3 regular implants in mandibular posterior area)

  • 유호선;소성수;한동후;조규성;문익상
    • Journal of Periodontal and Implant Science
    • /
    • 제32권3호
    • /
    • pp.577-588
    • /
    • 2002
  • Osseointegrated implants have been established as the standard treatment modality for full/partial edentulous patients since the 1960's, and the long term results for full edentulous patients have proven to be successful. Based on these results osseointegrated implants are now widely used for partial edentulous patients. There has been an increased interest towards the efficacy of wide implants, despite many reports mentioning the lower success rate of wide implants compared to regular implants. Recently, mandibular molar area defects are commonly restored using 2 wide implants, but it is not determined whether which treatment modality-3 regular implants or 2 wide implants-shows superior success rate. In this study, 2 wide implants and 3 regular implants used for the restoration of mandibular molar area are used to compare the survival rate of 1-4 years, and to analyze and compare the failure factors. The following conclusions could be drawn from this study. 1. Wide implants and regular implants showed 94.5% and 97,6% of survival rate respectively. After prosthodontic work, the survival rate was 100% and 98.1% for wide implants and regular implants respectively. 2. 5 failed implants have been removed. 2 wide implants and 1 regular implant have been removed due to failure of osseointegration. 1 wide implant was removed due to abscess formation caused by over-heating, and 1 regular implant was removed due to mechanical failure caused by over-loading within the first year of function. 3. No statistically significant difference was observed with respect to the amount of marginal bone loss of wide and regular implants.(P>0.05) In conclusion, restoration of the mandibular molar area using 3 regular implants was found to be a good treatment modality, and 2 wide implants could he considered a good treatment modality when success factors are taken into account.

광주와 전라남도의 음식문화 연구(II) - 특별음식 - (Food culture research of Gwangju and Chollanamdo area(II) - In Particular Food -)

  • 김경애;정난희;전은례
    • 대한가정학회지
    • /
    • 제41권3호
    • /
    • pp.181-196
    • /
    • 2003
  • Investigated kinds and utilization frequency for traditional food and Particular food to systematize Gwangju city and Chollanamdo area traditional food culture. Awareness for traditional food had pride because taste is various, and did that must use much when was festive day. Investigation subject were feeling necessity about accession, development of traditional food, and manufacture of traditional food, succession did that must take charge in home. Characteristic of taste for Gwangju city, Chollanamdo food was deep taste. Difference between variable was significant that age, religion that have pride about traditional food, attainments in scholarship, monthly income that used time much traditional food, degree that give from traditional food to snack is age, attainments in scholarship, years of married life, religion, reason that give snack to traditional food is daughter-in-law order, kind of traditional food that give to snack is age, monthly income mouth, opinion about accession and development of traditional food is age, religion, daughter-in-law order, reason that must inherit and develop traditional food is attainments in scholarship, time that eat much traditional food is attainments in scholarship, a person, medium that learn cuisine of traditional food is age, opportunity that is been interested to traditional food is age, attainments in scholarship, years of married life. By utilization rate of food-tasting food subdivisions of the season, used much by rice-cake soup, fermented rice punch, order of cake made from glutinous rice New Year's Day, by herbs, Gimgui, Ogokbap's order January Full Moon Day on the lunar calendar. By a cake made in the shape of a flower, azalea honeyed juice mixed with fruits as a punch order to Samjitnal, by beans panbroiling, dropwort raw order Buddha's Birthday, Tano Festival uses Charyunbyeong and used Tteoksudan in Yudu and used much by young chicken soup with ginseng and other fruits, watermelon order period of midsummer heat. Used songpyon and fermented rice punch in Full-moon Harvest Day, and Junggujeol used Chrysanthemum griddle cakes made in flower Pattern, and red-bean gruel taken on the winter solstice, and Nappyeongjeolsik was utilizing Goldongban. Pyebaek food utilization ratio was high the utilization rate by chestnut, jujube, chicken, wine order. The contributiveness food utilization rate was high the utilization rate by rice cake, dried croaker, fruit, oil-and-honey pastry order. The large table food utilization rate was high the utilization rate by fermented rice punch, fruit, steamed short-ribs order.

비디오 콘텐츠 기반 비트율 예측 (Video Content-Based Bit Rate Estimation)

  • ;이재용;오승준
    • 방송공학회논문지
    • /
    • 제18권2호
    • /
    • pp.297-310
    • /
    • 2013
  • 본 연구에서는 디지털 방송 TV, VOD 등 제한된 네트워크 대역폭에서 서비스를 제공하기 위해 비디오 콘텐츠를 부호화하는 과정에서 고정된 비트율을 이용한 화질과 비교하여 주관적 화질을 유지하면서 적절한 비트율을 찾는 방법을 제시한다. 제안하는 예측 구조는 먼저 프레임에서 비트와 연관성이 있는 파라미터를 추출하여 프레임의 복잡도를 계산한 후, 비트가 많이 할당될 것으로 예상되는 프레임을 찾아 후보 프레임으로 추출하며, 추출된 후보 프레임들에 대해 실제 부호화하는 과정으로써 목표 화질을 기준으로 수학적 모델링을 통해 최종적으로 전송될 비트율을 예측하는 구조를 설계하였다. 실험 결과, 고정 비트율에 비해 저복잡도 영상에서 평균 43%의 비트 감소율을 보였으며, 이러한 영상의 비트 감소율이 있음에도 주관적 화질을 유지함을 알 수 있었다. 비디오 콘텐츠별 적절한 비트율을 찾기 위해 기존 구조에서는 다수의 부호화를 통해 결과물들의 주관적 화질 검증을 반복적으로 거치는 반면, 제안하는 구조는 사람이 관여하여 주관적 화질 검증을 반복적으로 수행하지 않아도 되며 일부 프레임만을 부호화하여 비트율 예측이 가능하다. 따라서 전체 프레임 중 평균 4% 프레임을 부호화하여 자동적으로 비트율을 찾을 수 있다.

톱다리개미허리노린재 저항성 콩 유전자원 탐색 (Screening of Resistant Genetic Resources to Stink Bug in Soybean)

  • 오세관;백인열;황필성;강성택;서득용;박금룡
    • 한국작물학회지
    • /
    • 제52권2호
    • /
    • pp.140-145
    • /
    • 2007
  • 본 연구는 효율적인 콩 노린재 검정방법을 개발하고 저항성 유전자원 선발하여 콩 노린재 저항성 품종개발을 위한 기초 자료를 마련하고자, 영남농업연구소에 보존되고 있는 콩 유전자원 298자원을 공시하여 $2001{\sim}2004$년에 걸쳐 수행하였다. 1. 1년차에 298개의 유전자원에 대하여 노린재 피해율을 조사하였더니, 40%정도의 피해율을 나타낸 품종이 가장 많았고, 10%이하로 피해율이 낮은 품종도 10개정도 선발되었다. 2. 전년도에 피해율이 비교적 낮은 102개의 유전자원을 대상으로 2년차 선발을 수행한 결과, 12품종에서 10%미만의 낮은 노린재 피해율을 나타내었으며, 기타 대부분은$20{\sim}30%$의 피해율이었다. 3. 아울러 효율적인 노린재검정방법을 개발하고자 일품검정콩을 공시하여 콩 생육단계별 노린재 피해정도를 조사한 결과, 협비대기보다 종실비대기에서 노린재 피해협율이 급격히 높아지는 경향을 보였으며, R6에서 35.5%로 노린재 피해가 가장 심하였다. 4. 협피해율에 따른 저항성 유전자원을 선발한 결과는 Peking이 10.3%로 가장 낮았고, 소록콩, 황색준저리 및 소백나물콩 순서로 낮았으며, 이러한 결과는 종실에서도 유사하였으며, 공통적으로 소립종이 대립종에 비하여 저항성 정도가 강한 경향을 나타내었다. 5. 또한 노린재 기피반응을 구체적으로 구명하기 위하여 Peking과 소록콩을 별도로 시험한 결과, R5시기에서는 Peking이 10.0% 및 소록콩이 14.2%의 피해율을 보였지만, R5.5시기를 넘어가면서 피해율이 급격히 저하되는 것으로 보아 이 시기에 콩 내부 조직적으로 노린재의 접근을 저지시키는 성분변화가 나타나는 것으로 추측되었다. 6. 상기의 결과로부터 소록콩, 소백나물콩, Peking 및 황색준저리 등 4개의 저항성 유전자원은 금후 노린재에 대한 내충성 콩 품종개발을 위한 육종소재로서의 이용이 기대된다.

표고재배(栽培)의 관리분석(管理分析)과 종균활착(種菌活着)을 위한 골목관리(管理)에 관(關)한 연구(硏究) (The Analysis of Management and the Method of Cultivation of Lentinus edodes I. for Full-Development of Mycelium in Bed Logs)

  • 주명칠
    • 한국산림과학회지
    • /
    • 제85권4호
    • /
    • pp.596-604
    • /
    • 1996
  • 본 연구는 표고재배기술의 단계별 관리방법을 제시하며, 활착율 증대를 통하여 양질의 버섯생산을 도모하여 생산성을 향상시키는데 목적이 있다. 현지 재배자를 대상으로 재배현황에 대한 실태조사를 실시하여 재배현황을 분석하였고, 이를 토대로 현지 재배환경을 위주로 표고 종균활착율 향상과 재배 관리에 관하여 실험한 결과는 다음과 같다. l. 실태조사결과 많은 재배자가 활착촉진을 위한 재배관리에 등한히 하는 경우가 많았는데, 이는 노동력의 부족과 자본의 부족 그리고 재배관리 요령에 익숙하지 못한 이유 등이었다. 2. 원목내 수분함량은 3월 12일 l차 접종분이 28.63%, 3월 25일 2차분은 25.20% 그리고 4월 10일의 3차분은 23.19%로 점차 감소하였다. 종균의 활착에 적절한 원목내의 수분함량을 확보하며 활착증진과 노동력의 분산을 위해서는 3월 초부터 접종하는 편이 유리하였다. 3. 종균별 활착율은 10월 20일의 활착율조사에서 고온성은 모리465가 100%, 모리3046이 98.98%, 저온성에서는 모리290이 98.97%였다. 상대활착율은 고온성에서 모리465가 97.70%, 모리3046이 82.45%. 저온성에서는 모리290이 88.87%로 나타났다. 본 종균은 높은 활착율로 재배자들이 선호하는 품종으로 상대활착율에서 차이를 보여, 재배자의 종균선택에 유의하여야 할 부분으로 판단된다. 4. 접종시기별 활착율은 고온성 모리465와 저온성 모리290을 접종하여 고온성의 경우, 활착율은 1차(3월 중순) 100.0%, 2차(3월 하순) 98.98% 그리고 3차(4월 상순)에 96.79%로 약간의 차이를 나타냈고, 상대활착율은 1차가 97.70%, 2차 82.45% 그리고 3차가 8l.42% 순이였다. 저온성의 경우, 활착율은 1차가 99.09%, 2차가 98.97% 그리고 3차가 97.89%로 별차이가 없었으며, 상대활착율은 1차가 93.27%, 2차가 89.67% 그리고 3차가 88.87%로 나타났다. 접종시기가 빠를수록 활착율에서는 비교적 차이가 없었으나 상대활착율의 경우는 차이를 보였는데, 우리재배자의 접종시기가 3차인 4월에 집중되어 있는 점을 감안 한다면 앞으로의 접종시기는 조기접종인 3월초에 실시하도록 하여야 할 것으로 판단된다. 5. 가눕혀두기시 위치별로 골목내의 수분함량을 측정한 결과, 상단부일수록 수분함량이 낮아 가눕혀두가시 쌓는 높이결정에 있어서는 가능한한 60cm를 넘지 않도록 하여야 할 것으로 판단된다.

  • PDF

후륜 조향 동력학 모델 및 제어 로직 개발 (Development of the Dynamic Model and Control Logic for the Rear Wheel Steering in 4WS Vehicle)

  • 장진희;김상현;한창수
    • 한국자동차공학회논문집
    • /
    • 제4권6호
    • /
    • pp.39-51
    • /
    • 1996
  • In the turning maneuver of the vehicle, its motion is mainly dependent on the genuine steering characteristics in view of the directional stability for stable turning ability. The under steer vehicle has an ability to maintain its own directonal performance for unknown external disturbances to some extent. From a few years ago, in order to acquire the more enhanced handling performance, some types of four wheel steering vehicle were considered and constructed. And, various rear wheel control logics for external disturbances has not been suggested. For this reason, in this posed rear wheel control logic is based on the yaw rate feed back type and is slightly modified by an yaw rate tuning factor for more stable turning performance. And an external disturbance is defined as a motivation of the additional yaw rate in the center of gravity by an uncertain input. In this study, an external disturbance is applied to the vehicle as a form of the additional yawing moment. Finally, the proposed rear wheel control logic is tested on the multi-body analysis software(ADAMS). J-turn and double lane change test are performed for the validation of the control logic.

  • PDF

엔진 냉각계 개선을 통한 가솔린엔진의 성능 향상 (Improvement of Gasoline Engine Performance by Modifying the Engine Cooling System)

  • 류택용;신승용;이은현;최재권
    • 한국자동차공학회논문집
    • /
    • 제6권3호
    • /
    • pp.1-10
    • /
    • 1998
  • In this paper, we investigated the improvement of characteristics of knock, emission and fuel consumption rate by optimizing the location and size of water transfer holes in cylinder head gasket without change of engine water jacket design itself. The cooling system was modified in the direction of reducing the metal temperature in the head and increasing the metal temperature in the block. The optimization of water transfer holes in cylinder head gasket was obtained by "flow visualization test". The water transfer holes were concentrated in front side of the engine in order to reduce thermal boundary layer in the water jacket of No. 2 and No. 3 combustion changer in the cylinder head, which would have a large knock intensity, and increase thermal boundary layer in the water jacket of the cylinder block. When the modified coolant flow pattern was applied as proposed in this paper, the knock characteristic was improved. The spark timing was advanced up to 2$^{\circ}$ in low and middle speed range at a full load. In addition, HC emission at MBT was reduced by 5.2%, and the fuel consumption rate was decreased up to 1% in the driving condition of 2400 rpm and 250 KPa. However, since this coolant flow pattern mentioned in this paper might deteriorate the performance of vehicle cooling system due to the coolant flow rate reduction, a properly optimized point should be obtained. obtained.

  • PDF

PSALI 연구를 위한 실물대 실험 장치와 축소 모형간의 유의성 검증 (Verification of Significancebetween Experiment Devices and Scaled-down Model for the Study of PSALI)

  • 이진숙;김소연;하태현;정용규
    • 조명전기설비학회논문지
    • /
    • 제25권12호
    • /
    • pp.11-20
    • /
    • 2011
  • PSALI is referred to the supplementary lighting for the interior lighting under the daily lighting situation, and pursuant to the pertinent regulations in energy savings design standard and others in recent architecture works, the importance thereof has been increasing gradually coupled with the energy performance index (EPI), energy savings plan and the like as well as expansion of submittal and implementation policies. However, this type of PSALI studies indeed have a number of limitations since it has surrounding environmental conditions in direction, season, region, climate, time, opening rate, window area ratio, actual index, reflection rate of finishing materials and others in the architecture work as well as frequent changes in interior lighting environment for variables in daily light volume flowing into the interior, and others. Therefore, this study has analyzed existing advance research cases to produce the actual-sized model and scaled-down model, and installed the artificial lighting of LED light source possible to reproduce with same capability on both models. As a result of comparison and analysis of the artificial lighting with the key light, it has certain level of error rate from the scaled down lighting device in certain rate and actual model butit was noticeably significant within specific scope.