• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.436-441
• /
• 2005

In this study, precision injection molding analysis for BGA connector fabrication was performed. A BGA connector model with rectangular micro-holes were introduced to investigate the effect of mirco patterns on the injection molding process. Dual domain(2.5D) mesh and full 3D mesh for BGA connector model were prepared to perform precision injection molding analysis. To verify the Present analysis, experiments of injection molding were performed based on the results of the analysis. It was shown that the type of mesh has a significant effect on the flow pattern of BGA connector

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권4호
• /
• pp.224-230
• /
• 2015

This manuscript presents a real-time solution for 3D human body reconstruction with multiple RGB-D cameras. The proposed system uses four consumer RGB/Depth (RGB-D) cameras, each located at approximately $90^{\circ}$ from the next camera around a freely moving human body. A single mesh is constructed from the captured point clouds by iteratively removing the estimated overlapping regions from the boundary. A cell-based mesh construction algorithm is developed, recovering the 3D shape from various conditions, considering the direction of the camera and the mesh boundary. The proposed algorithm also allows problematic holes and/or occluded regions to be recovered from another view. Finally, calibrated RGB data is merged with the constructed mesh so it can be viewed from an arbitrary direction. The proposed algorithm is implemented with general-purpose computation on graphics processing unit (GPGPU) for real-time processing owing to its suitability for parallel processing.

• 한국가시화정보학회지
• /
• 제9권4호
• /
• pp.28-34
• /
• 2011

A volumetric gear pump is often used in extensive industrial applications to provide both high pressure and sufficiently high flow rate by physical displacement of finite volume of fluid with each revolution. Template mesh function in commercial CFD software, PumpLinx, by which 3-D meshes in the complex region between rotor and housing can be readily generated was employed for 3-D flow simulations. For cavitation analysis full cavitation model was included in 3-D simulations. The results showed high pulsation in pressure and flowrate which is implicated in pump vibration and noise. A model test for cavitation visualization was conducted and the results showed good qualitative agreement with numerical prediction.

• 대한기계학회논문집
• /
• 제18권8호
• /
• pp.2113-2122
• /
• 1994

The 3-D FEM analysis for simulating the stamping operation of planar anisotropic sheet metals with arbitrarily-shaped tools is introduced. An implicit, incremental, updated Lagrangian formulation with a rigid-viscoplastic constitutive equation is employed. Contact and friction are considered through the mesh-normal, which compatibly describes arbitrary tool surfaces and FEM meshes without depending on the explicit spatial derivatives of tool surfaces. The consistent full set of governing relations, comprising equilibrium equation and mesh-normal geometric constraints, is appropriately linearized. The linear triangular elements are used for depicting the formed sheet, based on membrane approximation. Barlat's non-quadratic anisotropic yield criterion(strain-rate potential) is employed, whose in-plane anisotropic properties are taken into account with anisotropic coefficients and non-quadratic function parameter. The planar anisotropic finite element formulation is tested with the numerical simulations of the stamping of an automotive hood inner panel and the drawing of a hemispherical punch. The in-plane anisotropic effects on the formability of both mild steel and aluminum alloy sheet metals are examined.

• 한국전산유체공학회지
• /
• 제12권3호
• /
• pp.1-7
• /
• 2007

In the present study, the wind pressure transients on platform screen door in island platform caused by a passing train are investigated numerically. The transient compressible 3-D full Navier-Stokes solution is obtained with actual operational condition of subway train and the moving mesh technique adopted for the train movement. To achieve more accurate results, detailed shape of train is included in a computational domain and the entrance and exit tunnel of platform are also modeled. Numerical analyses are conducted on three operational conditions of different velocity variation.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2022년도 추계학술대회
• /
• pp.106-108
• /
• 2022

이미지 기반 3D 형상 복원에 있어서, 이미지에 보이지 않는 폐색(Occlusion) 영역 부분에 대한 정보가 손실되므로 완전한 복원에 어려움이 있으며, 세밀한 텍스쳐(Texture) 표현이 이루어지지 않고 심한 평활화(Smoothing)나 고립된 노이즈 메쉬(Isolated Noise Mesh) 등 구조적 훼손이 발생한다. 주로 깊은 신경망을 이용하여, 음함수(Implicit Function) 기반 방법은 사전훈련이 완료된 보조 신경망들을 전면부에 배치하거나, Hourglass 등 임베딩(Embedding) 아키텍처를 추가하거나, 또는 표면 법선(Surface Normal)과 같은 환시(Hallucination)를 생성하여 신경망에 입력하기도 한다. 이 논문에서는, 인물의 이미지를 입력받아 색상, 머리카락 및 의상을 포함하는 완전 3D 인간 복원 기술들을 조망해본다.

• 터널과지하공간
• /
• 제30권6호
• /
• pp.509-518
• /
• 2020

본 연구에서는 실제 지질구조를 반영한 실규모 수치해석을 효율적으로 수행하고자 탐사 자료를 바탕으로 한 메쉬 생성, 해석수행, 결과분석을 위한 후처리의 일련의 과정을 포함한 해석 플랫폼을 구축하였다. 해석 플랫폼 구축을 위하여 연구자의 필요에 따른 코드 수정 및 다양한 수치해석 프로그램과 호환이 가능할 수 있도록 소스코드가 공개되어 있는오픈소스 프로그램을 활용하였다. 먼저 드론을 활용하여 촬영한 탐사 정보를 바탕으로 3차원 모델을 획득한 후, 오픈소스 3차원 창작 소프트웨어인 Blender를 활용하여 도메인의 메쉬 밀도를 해석 가능한 수준으로 조정하였다. 다음 단계로는 유한요소 메쉬 생성 프로그램인 Gmsh를 활용하여 도메인 내부에 사면체 기반의 메쉬를 생성하여 3차원 모델을 생성하였다. Gmsh를 통해 획득된 메쉬 정보를 수치해석 프로그램에 활용하기 위해서 메쉬 생성 규약에 적합하도록 변환하는 과정이 필요하며, 이는 Python을 통해 코드를 작성하여 수행하였다. 안정성 해석이 완료된 뒤에는 자료의 후처리 작업을 위해 시각화 및 데이터 분석 프로그램인 ParaView를 활용하여 다양한 시각화 자료를 생성하였다. 구성된 플랫폼의 활용성을 확인하기 위해 드론 탐사자료를 바탕으로 생성한 실규모 독도 모델을 대상으로 예비 안정성 분석을 성공적으로 수행하였으며, 예비해석을 통해 구축된 해석플랫폼이 향후 다양한 해석 과정에 활용될 수 있음을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.223-229
• /
• 2020

The present work proposes a solution to the static Boltzmann transport equation approximated by the simplified P₃ (SP₃) on angular, and the analytic coarse mesh finite difference (ACMFD) for spatial variables. Multi-group SP₃-ACMFD equations in 3D rectangular geometry are solved using the GMRES solution technique. As the core time dependent analysis necessitates the solution of an eigenvalue problem for an initial condition, this work is hence devoted to development and verification of the proposed static SP₃-ACMFD solver. A 3D multi-group static diffusion solver is also developed as a byproduct of this work to assess the improvement achieved using the SP₃ technique. Static results are then compared against transport benchmarks to assess the proximity of SP₃-ACMFD solutions to their full transport peers. Results prove that the approach can be considered as an acceptable interim approximation with outputs superior to the diffusion method, close to the transport results, and with the computational costs less than the full transport approach. The work would be further generalized to time dependent solutions in Part II.

• Journal of Mechanical Science and Technology
• /
• 제18권9호
• /
• pp.1614-1622
• /
• 2004

When a High Speed Train (HST) passes through a station with no stop, effects of wind pressure transients caused by this passing train have to be considered for the safety of passengers on the platform and for the possible structural safety problems as well. In Gwangmyeong and Daejeon stations of the Korean high speed railroad, tunnels inside stations for the passing train are proposed to reduce the noise and wind pressure transients to the passengers on the platform. In the present study, transient 3-D full Navier-Stokes solutions with moving mesh to implement train movement are obtained and compared with the results obtained by the towing tank experiment. Investigations on flow phenomena for various train speeds and design modifications are also performed.

• Composites Research
• /
• 제15권6호
• /
• pp.1-7
• /
• 2002

VARTM공정에서는 수지유동을 빠르게 하기 위해 투과촉진층이 사용되는데 투과촉진층과 섬유층 사이의 수지 속도차가 크다. VARTM제품은 길이에 비해서 두께가 얇으나 두 가지 다른 유통 매질 사이에 발생하는 lead-lag 유통을 관찰하기 위해서는 두께 방향을 고려한 3차원해석이 요구된다. 그런데 3차원 해석에 있어서 계산 시간이 문제가 된다. 일반 PC로 절점수가 많은 3차원 문제를 해석하려면 오랜 시간이 소요되므로 비실용적이다. 그래서 본 연구에서는 dual-scale 기법을 도입하여 전체 영역은 2.5차원으로 해석하고 주요한 관심 영역만을 3차원으로 해석하였다. 2.5차원 시뮬레이션만으로 예측하기 어려운 lead-lag 유동과 같은 특이한 유동 경향을 국부적인 3차인 해석을 통해서 발견학 수 있었다. 본 연구에서 개발된 global-local 해석기술은 일반 PC에서 적당한 계산 시간 내에 균일하지 않은 유동 매질 사이를 지나는 유동흐름의 특성 분석에 효과적으로 사용될 수 있다.