• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.967-973
• /
• 2021

In 2011, an earthquake and subsequent tsunami hit the Fukushima Daiichi Nuclear Power Plant, causing simultaneous accidents in several reactors. This accident shows us that if there are several reactors on site, the seismic risk to multiple units is important to consider, in addition to that to single units in isolation. When a seismic event occurs, a seismic-failure correlation exists between the nuclear power plant's structures, systems, and components (SSCs) due to their seismic-response and seismic-capacity correlations. Therefore, it is necessary to evaluate the multi-unit seismic risk by considering the SSCs' seismic-failure-correlation effect. In this study, a methodology is proposed to obtain the seismic-response-correlation coefficient between SSCs to calculate the risk to multi-unit facilities. This coefficient is calculated from a probabilistic multi-unit seismic-response analysis. The seismic-response and seismic-failure-correlation coefficients of the emergency diesel generators installed within the units are successfully derived via the proposed method. In addition, the distribution of the seismic-response-correlation coefficient was observed as a function of the distance between SSCs of various dynamic characteristics. It is demonstrated that the proposed methodology can reasonably derive the seismic-response-correlation coefficient between SSCs, which is the input data for multi-unit seismic probabilistic safety assessment.

• 한국산업융합학회 논문집
• /
• 제21권6호
• /
• pp.395-408
• /
• 2018

Even after the Fukushima nuclear accident in 2011, the rate of production of electric energy using nuclear energy is increasing, but there is a great danger such as the radioactive waste produced when using nuclear power, the catastrophic accident of nuclear power plant, and connection with nuclear weapons. In particular, Cs present in the ionic form of alkaline elements has a long half-life (30.17 years) because it is readily absorbed by the organism and emits intense gamma rays, thus presenting a serious radiation hazard. Therefore, it must be completely removed before it can be released into the natural ecosystem, because it can adversely affect not only humans but also natural ecosystems. Many adsorbents and ion exchangers which have high Cs removal efficiency have been used in recent years to completely separate and remove by self separation in water. Many adsorbents and ion exchangers which have high Cs removal efficiency have been used in recent years to completely separate and remove by self separation in water. In addition, researches have been doing to synthesize magnetic materials with adsorbents such as HCF and PB, and it shows a great effect in the removal rate of Cs present in wastewater or the maximum Cs adsorption amount. In particular, when a magnetic material was applied, excellent results were obtained in which only Cs was selectively removed from other cations. However, new problems such as applicability in the sea where Cs is directly released, applicability in various pH ranges, and failure to preserve the magnetizing force possessed by the magnetic body have been found. However, researches using ferromagnetic field with stronger magnetic properties than those of magnetic bodies is considered to be insufficient. Therefore, it is considered that if the researches combining the ferromagnetic field with the magnetization ability and functional adsorbents more actively, the radioactive material Cs which adversely affects the natural ecosystem can be effectively removed.

• 신재생에너지
• /
• 제7권4호
• /
• pp.37-41
• /
• 2011

This paper presents a Combined solar-wave Power Generation (CPG) concept that the CPG unit is maintained as buoyant at the level of sea water and it is also supported by a submerged tunnel, with the aim of supplying emergency electric power during the station blackout events of nuclear power plants. The CPG concept has been motivated from the 2011 Fukushima-Daiichi Accidents due to the loss of both offsite AC power and emergency diesel power caused by natural hazards such as earthquake and tsunami. The CPG is conceptualized by applying different types and different sites for emergency power generation, in order to reduce common cause failures of emergency power suppliers due to natural hazards. Thus, the CPG can provide a new mean for supplying emergency electric power during station blackout events of nuclear power plants. For this application, the CPG requirements are described with a typical configuration at the ocean side of a submerged tunnel.

• Nuclear Engineering and Technology
• /
• 제49권7호
• /
• pp.1414-1422
• /
• 2017

Remote response technology has advanced to the extent that a robot system, if properly designed and deployed, may greatly help respond to beyond-design-basis accidents at nuclear power plants. Particularly in the aftermath of the Fukushima accident, there is increasing interest in developing disaster robots that can be deployed in lieu of a human operator to the field to perform mitigating actions in the harsh environment caused by extreme natural hazards. The nuclear robotics team of the Korea Atomic Energy Research Institute (KAERI) is also endeavoring to construct disaster robots and, first of all, is interested in finding out to what extent safety benefits can be achieved by such a disaster robotic system. This paper discusses a new approach based on the probabilistic risk assessment (PRA) technique, which can be used to quantify safety benefits associated with disaster robots, along with a case study for seismic-induced station blackout condition. The results indicate that to avoid core damage in this special case a robot system with reliability > 0.65 is needed because otherwise core damage is inevitable. Therefore, considerable efforts are needed to improve the reliability of disaster robots, because without assurance of high reliability, remote response techniques will not be practically used.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1420-1427
• /
• 2023

Seismic risk has received increased attention since the 2011 Fukushima accident in Japan. The seismic risk of a nuclear power plant is evaluated via seismic probabilistic safety assessment (PSA), for which several methods are available. Recently, the discrete approach has become widely used. This approximates the seismic risk by discretizing the ground motion level interval into a small number of subintervals with the expectation of providing a conservative result. The present study examines the effect of the number of subintervals upon the results of seismic risk quantification. It is demonstrated that a small number of subintervals may lead to either an underestimation or overestimation of the seismic risk depending on the ground motion level. The present paper also provides a method for finding the boundaries between overestimation and underestimation regions, and illustrates the effect of the number of subintervals upon the seismic risk evaluation with an example. By providing a method for determining the effect of a small number of subintervals upon the results of seismic risk quantification, the present study will assist seismic PSA analysts to determine the appropriate number of subintervals and to better understand seismic risk quantification.

• 방사성폐기물학회지
• /
• 제14권4호
• /
• pp.423-434
• /
• 2016

인접 국가인 일본의 후쿠시마 원전에서 극한 자연재해로 인한 중대사고가 발생하면서, 국내에서 중대사고 및 확률론적 안전성 평가 (PSA, Probabilistic Safety Assessment)에 대한 중요성이 재인식되었다. 국내에서는 원전의 소외결말을 평가하는 3단계 PSA에 대한 연구개발이 최근까지 거의 이루어지지 않았다. 본 논문에서는 국외 3단계 PSA 전산코드 중, 미국의 MACCS2 (MELCORE Accident Consequence Code System 2), 유럽의 COSYMA (COde SYstem from Maria) 그리고 일본의 OSCAAR (Off-Site Consequence Analysis code for Atmospheric Releases in reactor accidents)에 대한 간략한 분석과 미국의 MACCS2에 대한 단점 및 한계점 분석을 수행하였다. 국내 외 전문가들에 의해 공통적으로 지적되어 온 MACCS2의 한계점은 다수호기사고와 사용후핵연료 저장조로부터의 방출 모사의 불가능, 그리고 대기확산모델을 단순 가우시안 플륨모델을 기본으로 한다는 것이며, 이중 일부는 MACCS2업데이트 버전을 통해 개선되어 왔다. Food chain 모델의 모사의 제한, 해양 및 수계 확산모델의 부재, 제한된 범위의 경제영향평가 등 또한 개선되어야 할 사항이다. 기술보고의 결과는 국내 3단계 PSA 관련 기술 개발을 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• Composites Research
• /
• 제29권1호
• /
• pp.40-44
• /
• 2016

원자력발전소에서 사용되고 있는 핵연료 피복관은 핵분열 생성물들의 외부 유출을 방지하기 위해 고온 고압의 냉각수 분위기에서 우수한 산화저항성을 가져야 한다. 그러나 후쿠시마 원전사고의 LOCA(Loss-Of-Coolant-Accident)와 같은 중대사고에서 핵연료의 피복관과 수증기 사이의 격렬한 반응으로 인해 급격한 고온산화를 동반한 다량의 수소발생으로 수소폭발을 방지하기 위한 핵연료의 개발이 요구되고 있다. 이에 따라 핵연료 피복관의 안전성 향상을 위해 내방사선성이 우수하며 높은 강도와 산화, 부식에 대한 내화학적 안정성 및 우수한 열전도도 의 특성을 갖는 SiC와 같은 구조용 세라믹스가 활발히 연구되고 있다. $SiC_f/SiC$ 복합체 보호막 금속 피복관은 지르코늄 피복관 튜브에 SiC 섬유를 필라멘트 와인딩 한 후 Polycarbosilane을 polymer로 함침하여 기지상을 형성하는 공정을 이용하였다. 따라서 이렇게 제조한 $SiC_f/SiC$ 복합체 금속 피복관을 Drop Tube Furnace를 이용한 열충격에 따른 시편의 산화 및 미세조직을 분석하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.177-179
• /
• 2018

After Fukushima nuclear accident at 2011, nuclear industrial has been focused on operation and maintenance phase, not design and construction phase. Continued good operating performance of nuclear power plants has been the best critical issue to nuclear utilities. Replacement for complete components as well as parts of components is being procured because nuclear utilities must maintain safety and reliability of operating nuclear power plants. However, many suppliers and manufacturers are giving up a nuclear quality assurance program under reduction in new construction of nuclear power plants. It is able to be increased difficulty in procuring spare parts to support operations and maintenance of nuclear power plants. Over 20% of nuclear power plant equipment in some countries is obsolete. Owing to obsolescence of nuclear safety-related items and/or withdrawing a nuclear quality assurance program of suppliers and manufactures, some replacement item and part might be procured to the item not covered by appendix B to USNRC 10 CFR Part 50. Under various methods of the nuclear repair and replacement methodology, utilities are supposed to establish a typical program for a repair and replacement of an electrical equipment and its parts in conjunction with a nuclear quality assurance. Concerning this typical program, this study suggests the repair and replacement methodology of electrical equipments used in nuclear power plants by procurement of a power supply, based on nuclear regulations, codes, standards, guidelines, specific and general technical information, etc..

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권3호
• /
• pp.165-173
• /
• 2016

2011년 3월 11일 리히터 스케일 9.0의 강진과 10-14m파도로 인해 Fukushima Daiichi(FD) 원자력 단지의 주전력과 보조전력이 끊어져 냉각장치가 작동하지 않았고 노심의 열이 제거되지 못해 폭발이 일어나는 사고가 발생했다. 노심의 열이 제거되지 못하면 핵연료 피복재인 지르칼로이(zircaloy)와 같은 금속이 고온 상태에서 수증기와 산화 반응하여 수소를 발생시킨다. 발생된 수소는 격납건물로 방출되는데 방출된 수소가 연소하는 경우 격납건물의 안정성에 영향을 줄 정도의 큰 충격을 유발할 수 있는 수소폭발로 이어질 수 있다. 본 연구에서는 격납건물 내부의 수소 분포를 분석한 연구 [1]에서 제시한 폭발의 위해도가 높은 영역에 대하여 폭발해석을 수행하였으며 수소 폭발이 격납건물의 건전성에 미치는 영향에 대하여 분석하였다. 격납건물 중앙부를 제외하고 수소폭발이 발생하였고 상부에 전체 수소의 40%이상이 모였을 때와 하부 좌측, 우측의 격벽사이에 수소가 모였을 때 큰 폭발이 발생했으며 격납건물 벽면에 큰 응력을 동반하였다.

• 한국항해항만학회지
• /
• 제35권5호
• /
• pp.455-462
• /
• 2011

2011년 3월 11일에 발생한 동일본대지진으로 인해 후쿠시마 원전사고가 발생하여 방사능오염손해에 대한 우려의 목소리가 높다. 특히 방사능오염손해는 선박의 안전항행에 위협이 될 뿐만 아니라, 선원의 안전과 해상운송을 통한 세계 경제의 건전한 발전을 저해시키는 원인으로 작용할 우려가 있다. 선박 또는 화물이 방사능오염손해를 입은 경우에 이러한 방사능오염물질을 제거하는데 상당한 비용이 소요될 것이며, 부득이한 경우에는 선박과 적하를 폐기처분해야 하는 경우도 발생한다. 또한 선원이 방사능에 피복될 경우 이러한 선원에 대한 치료 문제도 발생할 수 있다. 하지만 현재 방사능오염손해에 대한 사후적 대비책으로써 어떠한 방법과 근거에 의하여 보험 보상이 이루어지는지 여부가 명확하게 검토되고 있지 않은 상황이다. 따라서 이 논문에서는 방사능오염으로 인한 피해의 사후적 대비책으로써 방사능오염손해에 대한 해상보험에서의 보상 문제를 검토하고자 한다.