• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.614-620
• /
• 2020

In a previous study, delayed hydride cracking (DHC) assessment of pressurized water reactor (PWR) spent fuel during dry storage using the threshold stress intensity factor (K_IH) was performed. However, there were a few limitations in the analysis of the cladding properties, such as oxide thickness and mechanical properties. In this study, those models were modified to include test data for irradiated materials, and the cladding creep model was introduced to improve the reliability of the DHC assessment. In this study, DHC susceptibility of PWR spent fuel during dry storage depending on the axial elevation was evaluated with the improved assessment methodology. In addition, the sensitivity of affecting parameters such as fuel burnup, hydride thickness, and crack aspect ratio are presented.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1596-1609
• /
• 2019

The fuel rod performance has great importance for the safety and economy of an operating reactor. The fuel rod performance analysis code, which considers the thermal-mechanical response and irradiation effects of fuel rod, is usually developed in order to predict fuel rod performance accurately. The FRIPAC (${\underline{F}}uel$ ${\underline{R}}od$ ${\underline{I}}ntegral$ ${\underline{P}}erformance$ ${\underline{A}}nalysis$ ${\underline{C}}ode$) is such a fuel rod performance analysis code that has been developed recently by China Nuclear Power Technology Research Institute Co. Ltd. The code aims at the computational simulation of the Pressurized Water Reactor fuel rod behavior for both steady-state and power ramp condition. A brief overview of FRIPAC is presented including the computational framework and the main behavioral models. Validation of the code is also presented and it focuses on the fuel rod behavior including fuel center temperature, fission gas release, rod internal pressure/internal void volume, cladding outer diameter and cladding corrosion thickness. The validation is based on experimental data from several international projects. The validation results indicate that FRIPAC is an accurate and reliable fuel rod performance analysis code because of the satisfactory comparison results between the experimental measurements and the code predictions.

• Nuclear Engineering and Technology
• /
• 제26권4호
• /
• pp.526-535
• /
• 1994

KMRR(다목적 연구용원자로) 핵연료의 알루미늄 피복재의 부식거동을 평가하기 위해, 부식 예측치와 노내 부식 실측치의 비교를 통해 유도된 열속인자를 도입한 수정된 Griess 경험식을 유도하였다. KMRR 핵연료의 건전성이 유지되는 부식의 설계기준으로써는 산화층의 박리 방지가 보수적으로 설정되었으며, 산화층의 박리는 산화층에서의 온도차이가 114$^{\circ}C$ 이상에서 일어난다고 보수적으로 가정하였다. KMRR 핵연료의 출력이력을 첫 주기부터 평형주기까지 분석하여, 한계출력이력을 결정하였다. 한계출력이력을 가진 KMRR 핵연료의 부식량 예측계산 결과, 최대 산화층의 두께는 50$\mu\textrm{m}$ 이하였으며, 산화층 박리의 설계기준은 2배의 여유도를 가지고 만족하였다. 따라서, KMRR 핵연료는 피복재의 부식으로 인해 손상되지 않을 것으로 판단된다. 그러나, 수정된 Griess 부식경험식의 KMRR에의 적용 타당성은 KMRR 핵연료의 부식 감시를 통해 추가로 검증될 필요성이 있다.

• Nuclear Engineering and Technology
• /
• 제15권1호
• /
• pp.57-69
• /
• 1983

경수형원자로 핵연료봉의 거동분석을 위한 전산코드인 FRAPCON-1 코드가 월성 1호기에 장전되는 CANDU형 핵연료봉의 거동분석을 위해 적절한지를 평가하였다. 연료내의 중성자속의 감소와 연료피복재간 열전달을 계산하는 FRAPCON-1 코드의 모형들을 수정하였으며 핵분열 기체방출모형의 CANDU 핵연료에 대한 타당성여부를 검토하였고 피복재와 냉각수간의 열전달 계수 계산을 위해 중수특성을 사용하였다. 수정된 코드 FRAPCON-1-CSK를 사용하여 월성 1호기 핵연료의 각 설계변수들에 대한 민감도 분석을 수행하였다. 아울러 월성 1호기 핵연료봉의 거동특성분석도 수행하였는데 계산된 결과들은 CANDU 핵연료봉에 대한 설계기준이 알러져 있지 않는 관계로 경수로 핵연료봉 설계기준의 입장에서 검토되었다.

• 열처리공학회지
• /
• 제18권3호
• /
• pp.164-171
• /
• 2005

Iodine-Induced Stress Corrosion Cracking (ISCC) properties of Zircaloy-4 and HANA4 developed in KAERI for the high burn-up nuclear fuel cladding were evaluated. To confirm the effect of final heat treatment on ISCC resistance of Zr-alloy, stress relieved and recrystallized specimens were prepared and tested. With the pre-cracked specimen at internal surface, ISCC crack propagation rates and threshold stress intensity factor ($K_{ISCC}$) based on the fracture mechanics were measured by internal pressurization test at $350^{\circ}C$ in iodine environment. $K_{ISCC}$ of Zircaloy-4 and HANA4 cladding were $3.3MPa{\cdot}m^{1/2}$ and $4.4MPa{\cdot}m^{1/2}$, respectively. Pitting corrosion at the crack surface was observed and it seemed that TG crack propagation was derived from the pitting.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1549-1559
• /
• 2022

As an accident tolerant fuel (ATF) concept, oxide dispersion strengthened Zircaloy-4 (ODS Zry-4) cladding has been developed to enhance the mechanical properties of cladding using laser processing technology. In this study, a simulation technique was established to investigate the mechanical properties and effects of Y₂O₃ particles for the ODS Zry-4. A 3D representative volume element (RVE) model was developed considering the parameters of the size, shape, distribution and volume fraction (VF) of the Y₂O₃ particles. From the 3D RVE model, the Young's modulus, coefficient of thermal expansion (CTE) and creep strain rate of the ODS Zry-4 were effectively calculated. It was observed that the VF of Y₂O₃ particles had a significant effect on the aforementioned mechanical properties. In addition, the predicted properties of ODS Zry-4 were applied to a simulation model to investigate cladding deformation under a transient condition. The ODS Zry-4 cladding showed better performance, such as a delay in large deformation compared to Zry-4 cladding, which was also found experimentally. Accordingly, it is expected that the simulation approach developed here can be efficiently employed to predict more properties and to provide useful information with which to improve ODS Zry-4.

• Nuclear Engineering and Technology
• /
• 제52권5호
• /
• pp.1079-1092
• /
• 2020

A parametric study of several parameters relevant to design safety on the spent nuclear fuel (SNF) rod response under a drop accident is presented. In the view of the complexity of interactions between the independent safety-related parameters, a factorial design of experiment is employed as an efficient method to investigate the main effects and the interactions between them. A detailed single full-length fuel rod is used with consideration of post-irradiated fuel conditions under horizontal and vertical free-drops onto an unyielding surface using finite-element analysis. Critical drop heights and critical g-loads that yield the threshold plastic strain in the cladding are numerically estimated to evaluate the fuel rod structural resistance to impact load. The combinatory effects of four uncertain parameters (pellet-cladding interfacial bonding, material properties, spacer grid stiffness, rod internal pressure) and the interactions between them on the fuel rod response are investigated. The principal finding of this research showed that the effects of above-mentioned parameters on the load-carrying capacity of fuel rod are significantly different. This study could help to prioritize the importance of data in managing and studying the structural integrity of the SNF.

• 비파괴검사학회지
• /
• 제21권5호
• /
• pp.561-564
• /
• 2001

연구로인 하나로의 핵연료봉은 제조 시 피복층에 품질 관리 절차에서 규정한 크기 이상의 결함이 없도록 와전류탐상 검사를 하도록 되어 있다. 와전류탐상검사 절차를 수립하기 위하여 외삽 차동형 와전류탐촉자 및 표준시험편을 제작하였다. 임피던스 분석기를 사용하여 제작된 탐촉자에 대한 임피던스값을 측정하여 검사주파수 영역에서 최대감도를 얻도록 제작되었는지를 조사하였고, 이 탐촉자 및 MIZ-40A 와전류탐상기를 사용하여, 요구되는 결함 크기를 검출할 수 있는가를 조사하였다. 그 결과 이 탐촉자를 사용하여 길이 2mm 피복 두께 대비 깊이 10%인 인공 노치를 검출할 수 있었으며, 연구로용 핵연료봉의 제조 시 피복층에 존재하는 결함을 성공적으로 검사할 수 있었다.

• 한국재료학회지
• /
• 제12권4호
• /
• pp.259-263
• /
• 2002

Three different ribbons of amorphous $Til_{1-x}Be_x$ alloys such as $Ti_{0.59}Be_{0.41},\;Ti_{0.61}Be_{0.39}\;and\;Ti_{0.63}Be_{0.37}$ were made by melt-spinning method to be used as brazing filler metals for joining Zircaloy-4 nuclear fuel cladding tubes, and their crystallization behavior as well as microstructure of the brazed zone were examined. The crystallization behavior was investigated in teams of thermal stability, crystallization temperature and activation energy. The crystallization of the $Ti_{1-x}Be_x$ alloys proceeded in two steps by the formation of ${\alpha}$-Ti at a lower temperature and of TiBe at a higher temperature. The crystallization temperature and activation energy of $Ti_{1-x}Be_x$ alloys were higher and larger than those of $Zr_{1-x}Be_x$ alloys and PVD Be. Those resulted thinner joining layer with $Ti_{1-x}Be_x$ alloys, which kept sound thickness of Zircaloy-4 nuclear fuel cladding tubes after brazing. But in the brazed zones made by $Ti_{1-x}Be_x$ filler metals, a little solid-solution layers composed of Zr and Ti were formed toward the Zr cladding tube and Zr was detected in the brazed zones. Microstructure of brazed zone was changed from globular to dentrite with decreasing Be content in the $Ti_{1-x}Be_x$ filler metal.

• 대한기계학회논문집A
• /
• 제29권4호
• /
• pp.600-605
• /
• 2005

In this study, the ring tensile test at high temperature was suggested to evaluate the hoop tensile properties of small tube such as the cladding in the nuclear reactor Using the Arsene's ring model, the ring tensile test was performed and the test data were calibrated. From the result of the ring test with strain gauge and the numerical analysis with 1/8 model, LCRR(load-displacement conversion relationship of ring specimen) was determined. We could obtain the hoop tensile properties by means of applying the LCRR to the calibrated data of the ring tensile test. A few difference was observed in view of the shape of fractured surface and the fracture mechanism between at the high temperature and at the room temperature.