• Korean Chemical Engineering Research
• /
• 제47권2호
• /
• pp.237-242
• /
• 2009

화석연료의 고갈과 원유가격 폭등으로 인해 이를 대체할 수 있는 다양한 연료의 개발이 이루어지고 있다. 동물성 지방이나 식물성 기름의 주성분인 트리글리세라이드를 메탄올과 반응시켜 생산된 바이오디젤은 기존의 석유디젤을 대체할 수 있는 친환경적인 연료로 알려져 있다. 본 연구에서는 국내에서 유통중인 경유에 6종류의 원료별 바이오디젤을 일정 비율로 혼합한 뒤, 다양한 연료특성을 분석하였다. 바이오디젤의 농도가 높아질수록 밀도, 동점도, 인화점이 상승하였고, 저온특성은 악화되는 것을 확인하였다. 또한 경유의 중요한 연료특성인 세탄가를 IQT를 이용해 측정한 결과, 바이오디젤의 혼합비율이 높아질수록, 유도세탄가가 높게 측정되었으며, 특히 팜유로부터 생산된 바이오디젤의 경우, 71.26의 높은 유도세탄가가 측정되었다.

• 한국응용과학기술학회지
• /
• 제32권1호
• /
• pp.136-147
• /
• 2015

신재생에너지 공급 의무화제도(Renewable Portfolio Standard(RPS))가 시행됨에 따라, 발전 사업자들은 의무공급량 이행을 위해 발전용 바이오중유를 사용하고 있다. 본 연구에서는 발전용 바이오중유의 원료물질별 물성과 원료 조성에 따른 발전용 바이오중유의 품질특성을 알아보았다. 발전용 바이오중유와 원료유지의 연료특성은 전산가, 동점도, 금속분 등 고시 상 품질기준 항목을 분석하였으며, 적외선 분광광도계와 고성능 액체크로마토그래피를 이용하여 조성분포를 분석하였다. 팜유계열의 저가의 고산가 유지는 유리지방산 함량이 높아 전산가가 높고, 금속분에 의한 회분함량이 높았으며, 바이오디젤 공정부산물은 점도가 높았다. 동점도, 전산가, 금속분과 같은 발전용 바이오중유의 연료특성은 원료물질 의 조성 및 혼합비와 관련이 깊다.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1792-1797
• /
• 2013

Recently, due to the excessive use of fossil fuels, many studies about the fossil fuels such as solar and fuel cell energy source are progressing. Fuel cell system has high energy conversion efficiency. Also, fuel cell system is environmentally friendly system because the carbon emission is almost not occur. Therefore, the fuel cell system is considered as the core technology of in the fields of the future energy and environmental. Fuel cell system has an effect on distribution power system because another power source of other than large power plants. So, fuel cell system can be reason of power quality in the power system. In this paper, we constructed the system for an assessment on Islanding. The system is composed with power source, Impedance coordination load and linear load, fuel cell system. we are performed assessment on voltage and power quality in customer and the distributed power system during the Islanding of residential fuel cell system. In addition, no change in the impedance of power system, we made a islanding condition only using the actual load, As a variation of generation and load current under islanding, an analysis results based on assessment system showed that the power qualities of distribution system became more aggravation as effect of voltage sag and voltage swell phenomena.

• 한국대기환경학회지
• /
• 제30권6호
• /
• pp.545-554
• /
• 2014

In general, odorant was added to fuel gases, such as LPG, LNG and city gas, to prevent gas poisoning, ignition, explosion, or other accident caused by fuel gases, and to enable immediate and easy detection of fuel-gas leakage by emitting an offensive smell. This study describes a study on the exhaust emissions characteristics and fuel economy of liquefied petroleum gas (LPG) vehicle using LPG fuel with new sulfur free odorant. New sulfur free odorant was added to LPG to reduce sulfur content of the LPG. Its performance and exhaust emission were compared to those of LPG with sulfur containing odorant (EM, ethyl mercaptan). Engine performance using LPG with sulfur free odorant was similar to that with sulfur-containing odorant. Exhaust emissions from the LPG vehicle with LPG including sulfur free odorant were also similar to those with LPG including sulfur containing odorant in the FTP 75 and NEDC mode. There experimental results suggest that the sulfur free odorant may substitute for the sulfur containing odorant in LPG fuel.

• 한국수소및신에너지학회논문집
• /
• 제28권6호
• /
• pp.712-720
• /
• 2017

As Korean government has activated the renewable portfolio standard (RPS) since 2012, producers have been seeking and using the various renewable resources to meet the RPS quota. One of these efforts, Power Bio-Fuel oil demonstration project is being conducted to check the operability and compatibility with fossil fuel, Fuel oil (B-C) from 2014. The oil is a mixture of vegetable oil and animal fat or fatty acid ester of them and should satisfy some specification to use the power generation. The oil's quality and combustion characteristics are different from conventional oil, Fuel oil (B-C) in current power plant facility. In this study, it was investigated the storage stability and malodor intensity of Bio-Fuel oil.

• 한국수소및신에너지학회논문집
• /
• 제27권1호
• /
• pp.106-113
• /
• 2016

Lean burn engine, classified into port injection and direct injection, is recognized as a promising way to meet better fuel economy. Especially, LPG direct injection engine is becoming increasingly popular due to their potential for improved fuel economy and emissions. Also, LPDi engine has the advantages of higher power output, higher thermal efficiency, higher EGR tolerance due to the operation characteristics of increased volumetric efficiency, compression ratio and ultra-lean combustion scheme. However, LPDi engine has many difficulties to be solved, such as complexity of injection control mode (fuel injection timing, injection rate), fuel injection pressure, spark timing, unburned hydrocarbon and restricted power. This study is investigated to the influence of spark timing, fuel injection position and fuel injection rate on the combustion stability of LPDi engine. Piston shape is constituted the bowl type piston. The characteristics of combustion is analyzed with the variations of spark timing, fuel injection position and fuel injection rate (early injection, late injection) in a LPDi engine.

• 동력기계공학회지
• /
• 제21권4호
• /
• pp.57-61
• /
• 2017

The vehicle label fuel economy is used as an energy management indicator nationwide. It induces technology development of automobile manufacturers and plays a role of providing information when purchasing a consumer vehicle. However, consumers who purchase a new vehicle continued to complain that the label fuel economy is different from the mandatory fuel economy rate. The domestic fuel economy measurement method is the same as the North American measurement method. The results of the two test modes (urban (FTP-75 mode), highway (HWFET mode)) are calculated in five test modes reflecting various environmental conditions and driving patterns 5-cycle correction formula is used which is equivalent to the fuel efficiency value. In this study, to solve the consumers' curiosity about the fuel economy of new vehicle, we use domestic fuel economy measurement method to measure the new car condition within 150 km of driving distance and the cumulative driving distance condition of domestic label fuel economy test vehicle. A comparative evaluation of fuel economy was carried out for a durability vehicle of $6,500{\pm}1,000km$. A result, mean value of the fuel economy of the four gasoline vehicles increased by 2.7 % in the city center mode and by 2.5 % in the highway mode in the durable vehicle compared new vehicle. And in the case of the diesel vehicle it increased by 2.5 % and 3.9 % respectively. The harmful exhaust gas emitted from the vehicle also resulted in more emissions of both gasoline and diesel vehicles in new vehicles. It is considered that the increase of the frictional force of the vehicle driving system and the lubricating oil system would have an effect on the reduction of the fuel economy of the new vehicle, and it was found that the fuel economy and the exhaust gas were improved by proper cumulative distance (domesticate) to the new vehicle.

• Journal of Advanced Marine Engineering and Technology
• /
• 제12권1호
• /
• pp.28-36
• /
• 1988

Since the oil shocks of 1970s, the quality of the fuel oil for marine diesel engines has become more degarded than ever. When the poorer quality fuel is burned, carbon residues of the fuel oil cause blockage of the fuel injection valve nozzle and troubles of fuel injection system. The mis-firing of engine occurs due to the decrease of fuel quantity injected, the decrease of compression pressure in the slow speed range, the increase of fuel leaked and the high ignition temperature of degraded fuel etc. This paper is to investigate theoretically the effects of mis-firing on the crankshaft axial vibration of diesel engine. The cylinder pressure in operation is calculated by the computer aided simulation of closed cycle for a large two-stroke diesel engine and also the exciting force of axial vibration and the resonance amplitudes are calculated. And then, the condition of normal state, misfiring and one-cylinder cut-off operation are analyzed. The results of calculations show good agreements with those of the actual measurements.

• 한국응용과학기술학회지
• /
• 제35권4호
• /
• pp.1349-1358
• /
• 2018

화석연료로부터 기인한 환경오염에 대한 대응과 더불어 신재생에너지 공급의무화제도의 시행은 재생연료유 등 신재생에너지의 활용도를 증대시켰다. 부생연료유(2호)와 정제연료유(감압)는 국내 법령으로 엄격히 규제되고 있으며, 부생연료유(2호)를 혼합한 정제연료유(감압)의 물성변화를 시험하였다. 부생연료유(2호)를 1 : 1로 혼합한 정제연료유(감압)의 물성분석 결과, 국내 폐기물관리법에서 규정하고 있는 품질기준을 만족하였다. 다만, 연료와 관련한 추가항목 시험결과에서 높은 방향족 함량을 나타내었다. 연료 내 높은 방향족 함량은 사용기기의 고무류 파손이나 연소 시 그을음, 매연 등이 발생할 가능성이 높을 것으로 보인다.

• 동력기계공학회지
• /
• 제22권6호
• /
• pp.67-73
• /
• 2018

Gasoline that meets the quality standards is distributed in Korea. However, consumers who use toluene or solvent mixed with gasoline have appeared due to rising crude oil prices and for the purpose of tax evasion. Gasoline quality standard is enacted by the domestic and international research reference. A wrong fuel can influence automobile performance or environmental issue. Thus, empirical data from this issue is necessary. Therefore, this research observed catalyst influence by gasoline property change and inspect influence of environment. In this study, fuel property evaluation, lean-burn evaluation, and real vehicle exhaust emission test were performed. In the result of fuel property, the fuel "A" was measured to be up to 27% less octane than the normal gasoline and the distillation property was measured 24% higher than normal gasoline. In the test result of single cylinder engine lean-burn test, the fuels "A" and "B" show torque value 20% less than the normal gasoline. As a result of vehicle test using the catalyst, the fuel "A" was increased more than the normal gasoline with 83% THC, 1,806% CO and 128% NOx, and the fuel "B" was increased more than normal gasoline with 1.6% THC, 391% CO and 142% NOx.