• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.12
• /
• pp.1287-1292
• /
• 2006

Constructed wetlands are well known as highly efficient system to treat wastewater from different sources. Among the constructed wetlands, upflow types of constructed wetlands have become a common selection of wastewater during the last decade. We conducted a pilot scale study at peen house on treating potential of nutrients by upflow vegetated filter(UVF) pilot wetland which was combined with hydrodynamic separator and used the cattail plant(Typha angustifolia), and operated with artificial nutrients influent. This study evaluate the performances of upflow vegetated fille, in removal of nutrients. The objectives of this study were two-fold: (i) to evaluate the nutrients removal performance of pilot-scale upflow vegetated filter, filled with a mixture of perlite and soil media and planted with cattails and (ii) to design of scale-up upflow vegetated filter using Froude number. Results indicated that, under the condition of the ranges of hydraulic surface load rate were $22.7{\pm}9.6\;m^3/m^2/day$, the average removal of $COD_{Mn}$, and TN, TP were 57.5%, 40.0% and 41.5%, respectively. Computational fluid dynamics, FLUENT 6.0 program was used to predict the distribution of velocity in UVF and hydrodynamic separator. Full scale UVF was designed using the Froude number scale-up method that was assumed geomertic similarity between model and prototype. Result shows that the UVF with 3 m diameter has capacity of design sewage flowrate 75 $m^3/day$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.3
• /
• pp.53-60
• /
• 1988

The behavior of plane buoyant jet issuing vertically upwards into cross flow is analysed by experiments and integral scheme. The integral scheme is based on the self similarity and characteristic length scales to governing equations of continuity, momentum and constituent transport equation, in the horizontal and vertical flow region, respectively. Jet trajectories and the temperature distributions of jet centerlines obtained from experiments are analysed for various velocity ratios and densimetric Froude numbers. It was found that the analytical results about the trajectories and temperatures of jet center lines agree with the experiments and can be expressed as power laws.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.627-634
• /
• 2008

In a numerical simulation of open channel turbulent flows using RANS (Reynolds averaged Navier-Stokes) equations model equipped with VOF (Volume of Fluid) scheme, the determination of wall roughness for wall function was studied. The roughness constant, based on the law-of-the-wall for flow on rough walls, obtained by experimental works for pipe flows is employed in general wall functions. However, this constant of wall function is the function of Froude number in open channel flows. Thus, the wall roughness should be determined by taking into account the effect of Froude number. In addition, the wall roughness should be corresponding to Manning's roughness coefficient widely used for open channels. In this study, the relation between wall roughness height as an input condition and Manning's roughness coefficient was investigated, and an equation for effective wall roughness height considering the characteristics of numerical models was proposed as a function of Manning's roughness coefficient.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.971-979
• /
• 2023

Small ships (<499 GT) constitute 46% of the existing ships, therefore, it can be concluded that they produce relatively high CO₂ gas emissions. Operating in optimal trim conditions can reduce the resistance of the ship, which results in fewer greenhouse gases. An affordable way for trim optimization is to adjust the weight distribution to obtain an optimum longitudinal center of gravity (LCG). Therefore, in this study, the effect of LCG changes on the resistance of a small planing ship is studied using empirical and numerical analyses. The Savitsky method employing Maxsurf resistance and the STAR-CCM+ commercial computational fluid dynamics (CFD) software is used for the empirical and numerical analyses, respectively. Finally, the total resistance from the ship design process is compared to obtain the optimum LCG. To summarize, using numerical analysis, optimum LCG is achieved at the 46.2% length overall (LoA) at Froude Number 0.56, and 43.4% LoA at Froude Number 0.63, which provides a significant resistance reduction of 41.12 - 45.16% compared to the reference point at 29.2% LoA.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.235-235
• /
• 2018

홍수 시의 산지하천 만곡부는 2차류 발생과 편수위 상승에 따른 하상세굴 및 홍수범람 위험이 크다. 만곡부 외측에 주로 설치되어 있는 콘크리트 옹벽호안은 표면이 매끄러워 홍수피해를 가중 시킨다. 이러한 피해를 저감시키기 위해 콘크리트 옹벽에 돌출줄눈을 설치하여 유속조감 및 설치효과를 분석한 바 있다. 본 연구에서는 기존에 제안된 직사각형 단면의 돌출줄눈보다 내구성을 추구한 사다리꼴 단면의 돌출줄눈을 제시하여 수리모형 실험을 수행하였다. 수리모형 실험은 개수로 직선수로에서 수로경사 0.0035 조건에서 수로 출구 게이트를 조절하면서 이루어졌다. 모형 돌출줄눈의 조도높이는 3cm로 하였으며, 사다리꼴 밑각은 $45^{\circ}$로 완만한 경우이다. 설치간격은 무차원 돌출줄눈 간격을 기준으로 ?형 조도인 6으로 하였다. 돌출줄눈의 설치 유무에 따라 유량에 따른 수위를 측정하고 유속을 산정하여, 마찰저항의 변화를 파악하였다. 공급유량에 따른 Froude 수는 0.168~0.359 범위였으며, 유량이 증가에 따라 Manning의 조도계수는 감소하였다. Froude 수가 0.25보다 큰 경우 돌출줄눈설치의 조도계수가 미설치보다 큰 것으로 파악되었다. 그러나 사다리꼴 돌출줄눈의 흐름저항효과는 직사각형 돌출줄눈에 비해 상대적으로 작았다. 수로 횡단면의 수위분포에 따르면, 돌출줄눈 설치 측벽 주변에서 흐름저항에 따른 유속감소와 수위상승 효과가 나타나는 것으로 파악되었다. 이번 사다리꼴 돌출줄눈은 흐름저항 효과가 크지 않았기 때문에 사다리꼴 밑각을 조정하여 새로운 단면에 대한 추가적인 실험이 필요할 것으로 보인다.

• Solar Energy
• /
• v.5 no.2
• /
• pp.11-19
• /
• 1985

In this paper, the interface stability not to occur mixing and entrainment between the adjacent layers has been studied in the case of the selective withdrawal of a stratum and the injection in stratified fluid formed by the density difference in a small solar pond. There are stability parameter, Richardson number, Rayleigh number and Froude number as the parameters governing stability in order to measure the interface stability on the stratified fluid. The model which could measure the interface stability on the stratified fluid was the small solar pond composed by 1 meters wide, 2 meters high, and 5 meters long. In order to measure the interface stability on the stratified fluid at the inlet port, the middle section and the outlet port, Richardson number, Rayleigh number, and Froude number involved in the parameters governing the stability were calculated by means of the data resulted from the test of the study on hydrodynamic stability between the convective and nonconvective layers in that solar pond. Richardson number written by the ratio of inertia force to buoyancy force can be used in order to measure the stability on the stratified fluid related to the buoyancy force generated from the injection of fluid. Rayleigh number written by the product of Grashof number by Prandtl number can be used in order to measure the stability of the fluid related to the heat flux and diffusivity of viscosity. Froude number written by the ratio of gravity force to inertia force can be used in order to measure the stability of the nonhomogeneous fluid related to the density difference. As the result of calculating the parameters governing stability, the interface stability on the stratified fluid couldn't be identified below the 70cm height from the bottom of the solar pond, but it could be identified above the 70cm height from it at the inlet port, the middle section and the outlet port. When compared with such the three parameters as Richardson number, Rayleigh number, Froude number, the calculated result was in accord with them at inlet port, the middle section and the outlet port. Henceforth, it is learned that even though any of the three parameters is used for the purpose of measuring the interface stability on the stratified fluid, the result will be the same with them. It is concluded that all the use of Richardson number, Rayleigh number, and Froude number, is desirable and infallible to measure the interface stability on the stratified fluid in the case of considering the exist of the fluid flow and the heat flux like the model of the solar pond.

• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.90-95
• /
• 2009

The wind is very important factor in forest fire spread. Flame spread has a change through wind pattern change in forest fire. In order to analyze the forest fire flame spread rate, change of flame tilt depending on wind may be considering first. This is be cause the flame spread rate varies by the flame tilt changed due to transfer of heat. Especially, as wind speed grow, flame gets closer to surface, heat transfer ratio increase, virgin fuel bed reaches ignition temperature more rapidly, and flame moves faster. This study deduces, through experiment and physical figure analysis, relations on the change behavior of flame tilt due to wind. The value of flame tilt angle calculated from the equation and the experiment value showed average error angle of $3.3^{\circ}$, which is relatively smaller than results of previous studies that used other coefficient. Froude number coefficient A can be calculated in the method provided in this research for estimation of flame tilt angle of virgin fuel bed with varying thermal properties. The research finding is expected to be applied to future studies on flame spread through numerical analysis of heat transfer.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.3
• /
• pp.194-204
• /
• 2007

A numerical analysis and hydraulic experiments were undertaken to investigate the head loss occurring when a flow passes through vertical perforated walls. The numerical analysis applied continuity, momentum and energy equations to the control volumes that were set near the perforated wall. Non-dimensional equations were then derived to calculate both upstream depth and head loss for the given values of downstream depth and velocity. The hydraulic experiments were performed with several single and triple perforated plates varying their opening ratios and intervals. The numerical results with the single plates were compared with the experimental results, and it was shown that the contraction coefficient of the vertical line jet formed after the perforated plates relies on downstream Froude number as well as opening ratio. Based on the experimental results, empirical formulas were formulated. Finally, the formulas were applied to the triple plates sequentially from downstream side to upstream side, and it was found that in general the predicted values nicely agreed with the experimental results.

• Water for future
• /
• v.18 no.4
• /
• pp.361-367
• /
• 1985

The variation of water surface profile due to the constriction of flow section in open channel was analysed by numerical scheme. Findings are that the variations of water surface are mainly dependent on the constriction ratio and Froude number of uniform flow, and the magnitudes of backwater obtained from the flow profiles agrees fairly well with the experiments by Skogerboe. This implies that the backwater can be predicted by numerical technique.

• Water for future
• /
• v.20 no.3
• /
• pp.237-245
• /
• 1987

The behavior of negative buoyant flow into a reservoir with sloping bottom is analysed by numerical solution technique of the governing equations composed of continuty, momentum and constituent transport equation. The stable plunge point and maximum travel distance are found to be dependent on the bottom slope of reservoir as well as inflow densimetric Froude number, $Fr_e$. They are also related closely to a vortex formed just downstream from the plunge point and above the underflow. The plunge depth was shown to be a function of th bottom slope and $Fr_e$. The plunge depths obtained in this numerical study agree relatively well with published data and theoretical studies, and its predictive equation is derived.