• Title/Summary/Keyword: Frost ratio

검색결과 87건 처리시간 0.032초

폴리머-시멘트 모르타르의 미세구조 동결융합 저항성의 관계 (The Relationship between Microstructure and Freezing Thawing Resistance of Polymer-Cement Mortars)

  • 황의환;황택성
    • 한국세라믹학회지
    • /
    • 제31권9호
    • /
    • pp.949-956
    • /
    • 1994
  • In order to investigate the relationship between pore size distribution and freezing-thawing resistance of mortars, polymer-cement mortars were prepared by using styrene-butadiene rubber latex, ethylene-vinyl acetate emulsion and polyacrylic ester emulsion with various polymer-cement ratios at constant flow. From the results of the test, polymer-cement mortars had a good pore size distribution for freezing-thawing resistance compared with unmodified mortars because of having a small pore volume in the pore radius range of 103~104 $\AA$ affecting on the frost damage. And the freezing-thawing resistance of polymer-cement mortars was improved with increasing polymer-cement ratio.

  • PDF

자동차 전면유리의 제상시스템 설계를 위한 3차원 비정상 수치해석 (3D Unsteady Numerical Analysis to Design Defrosting System of Automotive Windshield Glass)

  • 강신형;이진호;변주석
    • 한국자동차공학회논문집
    • /
    • 제15권5호
    • /
    • pp.1-8
    • /
    • 2007
  • The present research is based upon the numerical analysis of a car windshield in order to represent the optimum design guide to improve the overall defrosting performance of the system. First, the control factors that highly affect the defrosting performance of a car windshield are chosen and afterwards, the optimum variables of each control factor are extracted out to analyze its performance. The main control factors for this research are respectively, the air injection angle of a defroster nozzle, the height of a nozzle outlet, and the ratio of the width to the height of a nozzle outlet. For such case when the air inlet angle is relatively small, the flow near the vicinity of the inner face of a windshield tends to expand. As a consequence, the heat transfer rate through the windshield decreases. Also, the height of a nozzle outlet is recommended to maintain its size to minimum. However, when the ratio mentioned before is designed less than unity, the defrosting performance decreases.

폴리머-콘크리트 복합재료 개발(I) - 폴리머-시멘트 콘크리트의 물성 - (Development of Polymer-Concrete Composite(I) - Physical Properties of Polymer-Cement Concrete Composites -)

  • 황의환;길덕수;오인석
    • 공업화학
    • /
    • 제8권6호
    • /
    • pp.979-984
    • /
    • 1997
  • 폴리머 혼화제로서 styrene-butadiene rubber(SBR)라텍스, ethylene-vinyl acetate(EVA)에멀젼 및 polyacrylic ester(PAE)에멀젼을 사용하여 동일한 스럼프에서 폴리머-시멘트비를 변화시켜 공시체를 제조하여, 압축과 휨강도시험, 흡수시험, 세공분포측정 및 미세구조 관찰 등을 실시하였다. 그 결과 폴리머-시멘트비의 증가와 더불어 압축과 휨강도 모두 향상되었고, 동해에 큰 영향을 주는 모세관 공극범위의 세공량은 감소되었으며, 폴리머 시멘트비 15wt% 이상에서 연속적인 폴리머필름이 형성되었다.

  • PDF

동결 및 동결-융해작용을 받는 점성토의 강도와 그의 변형거동 (Experimental Studies of Characteristics of Strength and Deformation Behaviour of Frozen and Cyclic Frozen-thawed Clayey Soils)

  • 유능환;유영선;유연택
    • 한국농공학회지
    • /
    • 제33권2호
    • /
    • pp.112-119
    • /
    • 1991
  • Some experiments were carried out to investigate the effects of freezing and thawing on the strength and strain characteristics of alluvial silty clay under the different temperatures, loading and moisture conditions. The results were as follows; 1. The soil used was proved to be consisted of silty clay with honey-combed structure, and showed higher dilatancy, frost activity and lower stability in natural state. 2. Soil treated with freezing and thawing cycles showed lower compressive strength compared with the non treated, The strength decreased with incement of freezing and thawing cycles. It's shapes of stress-strain curves were flat and did not formulate a peak while the peak strength of higher moisture content soil decreased with the increment of moisture content. It's decrement ratio was most distinctly shown at the first one cycle of freezing and thawing. 3. The cohesion decreased due to freezing and thawing cycles but internal frcition angle was not changed. 4. The liquid limit decreased with increment of freezing and thawing cycles, and became almost constant after three cycles of freezing and thawing. 5. The strength under simple loading at failure mode was appeared to be higher compared with the cyclic loading after freezing and thawing but initial moisture content effect was not observed. 6. Ice lense was not observed within 50% of ice content ratio but observed over 100%. The higher the ice content ratio, the higher the peak strength. As a matter of fact, it seems that an optimum ice content ratio exists for plastic mode and the least compressive strength.

  • PDF

한라산 구상나무(Abies koreana W.)의 연륜연대학적 연구 - 기후변화에 따른 생장변동 분석 - (Dendrochronological Analysis of Abies koreana W. at Mt. Halla, Korea: Effects of Climate Change on the Growths)

  • 구경아;박원규;공우석
    • The Korean Journal of Ecology
    • /
    • 제24권5호
    • /
    • pp.281-288
    • /
    • 2001
  • 한라산 구상나무의 연륜생장에 영향을 미치는 환경요인 및 지구온난화에 따른 생장변화를 밝히고, 생장쇠퇴 현상을 조사하기 위하여 구상나무의 연륜분석을 실시하였다. 구상나무의 연륜을 분석한 결과 마스터 연대기의 연대 구간은 1912년부터 1999년으로 조사되었으며, 각 시료들마다 공통적으로 생장이 가장 저조한 해는 1982년, 1988년, 1996년이었다. 연륜연대기(연륜폭 곡선)지수와 기후요소와의 상관관계를 살펴본 결과 구상나무의 생장은 4월 및 전년 11월의 기온과 양의 상관관계를 나타냈으며, 전년 12월 및 1월 강수량과 유의한 양의 상관관계를 나타내었다. 구상나무의 생장과 강수량은 전반적으로 양의 상관관계를 나타내어 구상나무가 수분스트레스에 민감한 수종임을 보여주었다. 구상나무의 생장과 엘리뇨-남방진동과 상관관계를 분석한 결과 구상나무의 생장은 전년도 1월, 2월, 3월 및 11월 남방진동지수(SOI)와 양의 상관관계를 가졌다. 구상나무의 연륜 시료에서는 동해(frost damage)로 추정되는 상흔이 많이 관찰되었으며, 다수의 시료에서 공통적으로 상흔이 나타나는 연도는 1964년, 1965년, 1966년이었다. 이 시기에 시료를 채취한 한라산 정상부근에 기상관측 자료가 없어 확인이 불가능하지만 국지적인 저온 현상이 나타났던 것으로 추정된다. 기온의 온난화에 따른 생장변화를 조사한 결과 계절별로는 겨울 기온이 상승하였을 경우 생장이 감소하는 것으로 나타났으며, 반면에 가을철 기온이 상승하였을 경우에는 생장이 증가하는 것으로 나타났다. 연간 기온상승에 따른 임목 생장의 변화는 적은 양이지만 증가하는 것으로 나타났는데, 이것은 연간 기온상승이 균등하게 증가할 경우 가을의 생장 증가량이 겨울의 생장 감소량보다 크기 때문이다. 그러므로 앞으로 온난화가 진행될 경우 구상나무의 생장변화는 계절에 따른 기온변화의 차이에 따라 다르게 나타날 것으로 예측된다. 채취한 한라산 구상나무시료 중 생장쇠퇴현상이 나타난 시료는 54개의 시료 중 51개의 시료로 거의 모든 구상나무 임목에서 생장쇠퇴현상이 나타났다. 51개의 시료 중 44개의 시료에서 최근까지 지속적으로 생장쇠퇴현상이 나타났으며, 이들 44개의 시료 중 31개의 시료에서 평년대비 70% 이상의 극심한 생장쇠퇴현상이 나타났다. 이러한 생장쇠퇴의 원인은 지속적인 기온상승으로 추정되며, 특히 겨울기온의 상승이 영향을 미친 것으로 추정된다. 겨울기온이 상승하는 경우 상록수는 광합성을 할 수 있는 조건이 충족되나 광합성에 필요한 수분공급이 부족하여 수분수지의 불균형이 발생하게 되며, 이것은 생장에 악영향을 미치게 되는 것으로 판단된다.

  • PDF

단열골재 개발을 통한 동토방지 기술개발에 관한 연구 (A Study on the Development Lightweight Aggregate using Recycled-Paint for Reduction in Freezing Ground)

  • 문종욱;백민호
    • 한국방재학회 논문집
    • /
    • 제10권4호
    • /
    • pp.47-54
    • /
    • 2010
  • 지정폐기물인 폐페인트를 이용한 단열골재 개발을 위한 자료를 제시하기 위하여 이를 위한 실험으로 함수비, 진밀도, 액성한계, 소성한계, 마모감량, 모래당량, 체가름 시험을 진행하였다. 함수비 시험은 80:20의 배합이 1.4이고, 쇄석 골재만 사용한 것은 1.0으로 폐페인트 단열골재의 용적비가 증가하면서 함수비의 증가도 많았다. 또한, 진밀도 시험은 혼입율의 증가에 따라 점점 상승하였고, 흡수율도 증가하였다. 이는 골재와 폐페인트의 특성상 발생되는 공극분포의 차이로 인한 현상으로 판단된다. 모래당량과 마모감량 실험에서는 마모감량은 쇄석골재만 사용한 경우는 13.5이고 20% 혼입한 경우는 14.4로 증가하지만, 이는 단열골재의 약한 조직으로 인한 현상이라 판단된다. 이러한 실험으로 볼 때, 도로공사 시방서의 동상방지층은 모래당량 20, CBR 10으로 만족하도록 규정하고 있어 본 실험은 전 배합에서 모두 품질기준에 만족하는 결과를 보였다. 현재 폐페인트는 단순 매립용하거나, 소각 처리되는 현 실정에서 골재로 활용할 수 있게 됨으로써 천연골재의 부족이나 자원의 낭비를 해소할 수 있을 것으로 파악된다. 기존의 자갈보다 단열효과가 뛰어나고, 가벼우며, 단단한 단열골재를 사용함으로써 재활용이 활발할 것으로 예상된다.

고진공 및 극저온 달의 지상 환경 재현을 위한 지반열진공챔버 운영 효율성 평가 (Assessment of DTVC Operation Efficiency for the Simulation of High Vacuum and Cryogenic Lunar Surface Environment)

  • 진현우;정태일;이장근;신휴성;유병현
    • 한국지반공학회논문집
    • /
    • 제38권12호
    • /
    • pp.125-134
    • /
    • 2022
  • 세계 우주 기관들로 조직된 국제 우주탐사 협력 그룹이 발간하는 글로벌 우주탐사 로드맵에서는 미래 달 탐사 방향과 달 자원 활용을 위한 거주 계획을 반영하는 등 달은 심우주 탐사를 위한 전초기지로 주목받고 있다. 따라서 달 행성 지반 환경 재현 인프라 기술은 미래 달 지상 탐사를 위해 필요한 다양한 장비들의 성능검증에 활용될 수 있다. 본 연구에서는 달 착륙 및 기지 건설 후보지인 달 남극 영구음영지역의 고진공 및 극저온 지상 환경을 재현하고자 하였다. 현재까지 달 지상 환경 재현을 위한 효율적 장비 운용 프로세스는 제시되지 못한 실정으로, 본 연구에서는 파일럿 지반열진공챔버에 인공월면 지반을 조성한 뒤 다양한 진공 환경에 대해 일방향 지반냉각 실험을 진행하고 이를 평가하였다. 냉각효율 및 장비 안정성 측면에서 가장 유리한 진공 환경은 30-80 mbar인 것으로 파악되었으나, 고진공 환경에서 얼음이 승화되지 않기 위한 극저온의 온도를 구현하기 위해서는 주변부 냉각이 추가적으로 요구되었다. 이를 위해 본 연구에서는 동결비 개념을 적용해 효율적인 주변부 냉각 가동 시점을 제안하였다.

수크령 파종량에 따른 주요녹화식물의 혼파가 비탈면 녹화에 미치는 영향 (Effects of Mixed Seeding of Main Revegetation Plants Treated with Different Seeding Amounts of Pennisetum alopecuroides on Cut-Slope Revegetation)

  • 함경식;심상렬
    • 한국환경복원기술학회지
    • /
    • 제18권1호
    • /
    • pp.25-35
    • /
    • 2015
  • Pennisetum aloperculoides is a key revegetation species mixed with other plants species and used for revegetating cut-slopes. The purpose of this research is to identify the effects of mixed seeding of revegetation plants on cut-slope revegetation with respect to the quantity of Pennisetum aloperculoides seeds. The coverage ratio and appearance frequency of Pennisetum aloperculoides, and other revegetation species were measured to assess the cut-slope revegetation. We divided Pennisetum treatments into four groups with different Pennisetum seed quantities of $0g/m^2$, $5g/m^2$, $10g/m^2$, and $15g/m^2$. For each treatment group, we mixed identical quantities of seeds from herbaceous flowers (bird's-boot trefoil, aster, chrysanthemums, golden coreopsis and china pink), cool-season turfgrasses, and woody plants (korean lespedeza, indigo and silk tree). The increase in the quantity of the Pennisetum seeds resulted in the higher coverage ratio for Pennisetum, but in the lower coverage ratio for herbaceous flowers, cool-season turfgrasses, and woody plants. We observed a short-term succession process in which the dominant species shifted in the following order: the initial species Pennisetum, herbaceous flowers, and then lastly woody plants. In case of the appearance frequency, we also observed the higher appearance frequency for Pennisetum and the lower appearance frequency for the other plants due to the increase in the quantity of Pennisetum seeds. Pennisetum, bird's-foot trefoil and china pink showed the tendency to decrease the appearance frequency from one month after seeding while cool-season turfgrasses became extinct due to summer drought. In the woody plants, the appearance frequencies of korean lespedeza and indigo were high due to the decrease in quantity of Pennisetum seeds. The silk trees were damaged from winter frost and none emerged at all in 2013 (the following year after the seeding). Korean lespedeza and indigo appeared to have the short-term rapid dominance over other treated revegetation plants.

구동장치 및 열교환기 변경에 따른 냉매가열식 열펌프의 성능특성 (Performance of a Refrigerant Heating Type Heat Pump by Changing of Driving Devices and Heat Exchangers)

  • 박윤철;김상혁;김지영
    • 설비공학논문집
    • /
    • 제20권1호
    • /
    • pp.49-56
    • /
    • 2008
  • When the outdoor air temperature decreased less than the freezing temperature, frost forms at the surface of heat exchangers and it makes the performance degradation of a heat pump system. In this study, a heat pump system has been developed which has a refrigerant heating device as an auxiliarly heating equipment. To reduce power consumptions of the system, a liquid pump, rather than a compressor, was used to drive refrigerant in the heat pump cycle. Ratio of refrigerant mass flow between a refrigerant heating heat exchanger(GHX) and a outdoor plate heat exchanger(PHX) was varied and the system performance was measured and analyzed. As results, when the refrigerant flow rate to the GHX was decreased, the system performance is decreased due to heat absorption capability restriction of the GHX and small variation of the power consumption in the compressor. The effect on the evaporating and condensing pressure by the distribution ratio of the refrigerant to the each heat exchanger is small compare to the effect by the frequency change in the compressor. When the compressor was replaced by the liquid pump, the capacity of the system decreased a little, however the power consumption decrease approximately 80% compare with the power used in the compressor.

석회암 순환잔골재를 사용한 고강도 콘크리트의 공학적 특성 (Engineering Properties of High Strength Concrete Using Lime Stone Recycling Fine Aggregate)

  • 한천구;김현우
    • 한국건설순환자원학회논문집
    • /
    • 제3권1호
    • /
    • pp.72-79
    • /
    • 2007
  • This study investigates the engineering properties of concrete incorporating lime stone crushed fine aggregate(Ls), which has been abandoned about 20% of total production due to the low purity. Test results showed that increase of Ls had favorable fluidity and slightly decreased air content. Bleeding capacity of all specimens was not appeared as those were high strength mixture proportion, but the specimens using more Ls accelerated initial and final setting. For the mechanical properties, specimens incorporating higher ratio of Ls, overall, resulted in increase of compressive strength, and exhibited very small inclined tendency in a dynamic elasticity modulus test In addition, for the durability properties, specimens incorporating higher Ls dramatically decreased a drying shrinkage and showed similar tendency in a frost & thaw test, as well as showing no more change in an accelerated neutralization test from the beginning. In conclusion, as it was confirmed in the experimental test, the high strength concrete applying Ls did not showed any problems in the aspects of engineering properties and mostly exhibited even more excellent quality than the specimens using natural fine aggregate.

  • PDF