• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.53.1-56
• /
• 1999

Using a new dynamic-explicity program SAIT_STAMP the analysis of forming a front door panel is presented. The analysis consists of 7 processes including drawing trimming flanging and springback. From the analysis results it is shown that adaptive refinement scheme and robust trimming algorithm enable SAIT_STAMP to simulate the multi-stage forming of automotive parts with large and complex geometry.

• 한국지반신소재학회논문집
• /
• 제17권4호
• /
• pp.179-188
• /
• 2018

본 연구에서는 새로운 형태의 패널식 보강토옹벽에 대한 현장 적용성 및 구조 안정성을 평가하기 위하여 두 개소 현장에서 현장계측을 수행하였다. 새로운 형태의 패널식 보강토옹벽은 접힘홈이 형성된 띠형 섬유보강재를 패널식 전면벽체에 매립된 C형 삽입구를 통해 직접 연결함으로써 보다 일체화된 구조를 형성시킨 보강토옹벽이다. 현장계측에서는 보강토옹벽의 시공 중 및 완료 후에 발생하는 전면벽체의 수평변위와 띠형 섬유보강재의 인장변형, 전면벽체에 작용하는 수평토압 등을 측정하고 분석하였다. 분석 결과, 보강토옹벽 시공 완료 후에 전면벽체에 작용하는 최대 수평토압은 Rankine 토압의 2/3 이하 수준이고, 전면벽체에 발생된 최대 수평변위는 보강토옹벽 높이의 0.5% 이하 수준이며, 보강재에 유발된 최대 인장변형률은 1.0% 이하로 나타나 두 현장의 보강토옹벽이 모두 안정한 상태를 유지하고 있음을 알 수 있었다.

• 한국소음진동공학회논문집
• /
• 제24권4호
• /
• pp.275-281
• /
• 2014

This study has been analyzed the sound performance of the noise barriers with respect to the configuration of the front perforated panel geometries and the filled absorption materials. Noise barriers' acoustic performance should be required to meet 0.7 of NRC value at least. The global absorbing performance of the barriers have been investigated by changing the opening ratio of the front perforated panel and the absorbing characteristics of the absorbing material using two microphone method. Therefore, It it possible to obtain to increase acoustic performance of the specific frequency ranges by designing the perforate rates of the front panel and absorbing characteristics of the absorbing materials inside, as well. This study try to find out the possibilities of applying the absorbing noise barrier to railway usage.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.181-182
• /
• 2000

The glass compositions of $PbO-SiO_2-B_2O_3$ system and $P_2O_5-PbO-ZnO$ system for the transparent dielectric materials for front panel and $P_2O_5-ZnO-BaO$ and $SiO_2-ZnO-B_2O_3$ for the reflective dielectric materials for back panel of PDP(Plasma Display Panel) were investigated. As a transparent dielectric materials for front panel, $PbO-SiO_2-B_2O_3$ glass showed good dielectric properties, high transparency and proper thermal expansion matching to soda-lime glass substrate. And the reflective dielectric materials for back panel were prepared from parent glass of $SiO_2-ZnO-B_2O_3$ system and oxide filler. It was found that these glass-ceramics are useful materials for reflective dielectric layers, as those have a similar thermal expansion to soda-lime glass plate, high reflectance, low sintering temperature.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.487-488
• /
• 2006

In these days, demand of a LCD monitor is remarkably increasing with development of the LCD technology. However, there are thermal problems for improvement of efficiency for the LCD monitor. Thus, this research analyzed thermal problems such as convection and conduction heat transfer characteristics in the LCD monitor using an infrared (IR) camera. Also, the results of the outer side of the front LCD panel using the IR camera have been compared with the results of the inner side of the front panel using T-type thermocouples. The equations have been derived for the temperature distribution of the inner side of the front LCD panel by a multiple regression method including variables for ambient temperature, humidity and temperature differences between the front and back panels of the LCD monitor.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.711-712
• /
• 2009

The fabrication of micro-scale irregular holes by using PMMA (Poly Methyl Methacrylate) beads in the front dielectric layer was proposed to improve luminous efficacy of an ac plasma display panel. Through the firing process of front dielectric layer, bowl shaped holes with a depth of $2.5{\mu}m$, a top diameter of $8-12{\mu}m$, and a bottom diameter of $4-7{\mu}m$ were fabricated. The proposed ac plasma display panel with the irregular micro-scale holes improved the luminous efficacy by 18 % due to the decrease in the minimum sustain voltage.

• 한국의상디자인학회지
• /
• 제18권3호
• /
• pp.71-83
• /
• 2016

This study attempted to analyze trends of structural changes in the front middle part of men's underwear and get basic data for the development of men's underwear patterns. In terms of a research method, the structure and pattern of the front middle part of men's underwear were analyzed by referring to the design and description of the drawing, focusing on men's underwear which targeted to isolate penis from scrotum among the 'men's underwear' or 'functional men's underwear'-related patents. According to the study, three topics were obtained as follows: a support attached to the inside of the front middle part; inner cloth attached to the inside of the front middle part; change in the structure of the front middle panel. The aspects by the specific topic targeted to isolate penis from scrotum and prevent the scrotum from adhered to a thigh are as follows: 1) When a support is attached to the inside of the front middle part, the following three methods are proposed: Penis isolated from scrotum by a rest which is designed using the band; penis and scrotum rested in the band and in a pocket respectively; protruded rest inside the front middle part of the underwear. 2) When an inner cloth is attached to the inside of the front middle part, the following methods are designed: A pocket-type inner cloth is attached; isolation of penis hole from the scrotum pocket using a rectangular separator; U-shaped pocket designed to rest penis and scrotum is attached. 3) Regarding change in the structure of the front middle panel, the integration of penis and scrotum resting parts can be divided into two cases: Securing a space using wrinkles; keeping it voluminous using the vertical line. In this all-in-one penis and scrotum-holding type, in addition, different front panel patterns were applied.

• Journal of Information Display
• /
• 제2권3호
• /
• pp.39-43
• /
• 2001

The glass compositions of $PbO-SiO_2-B_2O_3$ system and $P_2O_5-PbO-ZnO$ system for the transparent dielectric materials for front panel and $P_2O_5$-ZnO-BaO and $SiO_2-ZnO-B_2O_3$ for the reflective dielectric materials for back panel of PDP (Plasma Display Panel) were investigated. As a result, transparent dielectric materials for front panel showed good dielectric properties, high transparency, and proper thermal expansion matching to soda lime glass substrate. And the reflective dielectric layers for back panel were prepared from two series of parent glass and oxide filler. It was found that these glassceramics are useful materials for dielectric layers in PDP device, as they have similar thermal expansion to soda-lime glass plate, high reflectance, and low sintering temperature. In particular, the addition of $BPO_4$ and $TiO_2$ as fillers to $SiO_2-ZnO-B_2O_3$ system is considered to be the most effective for acquiring good properties of lower dielectric layer for PDP device.

• Steel and Composite Structures
• /
• 제30권3호
• /
• pp.217-230
• /
• 2019

One of the most important design criteria in underground structure is to design lightweight protective layers to resist significant blast loads. Sandwich blast resistant panels are commonly used to protect underground structures. The front face of the sandwich panel is designed to resist the blast load and the core is designed to mitigate the blast energy from reaching the back panel. The design is to allow the sandwich panel to be repaired efficiently. Hence, the underground structure can be used under repeated blast loads. In this study, a novel sandwich panel, named RC panel - Helical springs- RC panel (RHR) sandwich panel, which consists of normal strength reinforced concrete (RC) panels at the front and the back and steel compression helical springs in the middle, is proposed. In this study, a detailed 3D nonlinear numerical analysis is proposed using the nonlinear finite element software, AUTODYN. The accuracy of the blast load and RHR Sandwich panel modelling are validated using available experimental results. The results show that the proposed finite element model can be used efficiently and effectively to simulate the nonlinear dynamic behaviour of the newly proposed RHR sandwich panels under different ranges of free air blast loads. Detailed parameter study is then conducted using the validated finite element model. The results show that the newly proposed RHR sandwich panel can be used as a reliable and effective lightweight protective layer for underground structures.

• 산업경영시스템학회지
• /
• 제33권2호
• /
• pp.39-47
• /
• 2010

Bonding glasses is one of the important PDP (Plasma Panel Display) manufacturing processes. Bonding process includes aligning front and rear glasses with fixing clips. In this process, clips have to maintain perfect alignment between the front and rear glasses. The panel which is fixed by clips goes to next process called sealing. The sealing process is performed in high temperature ($465^{\circ}C$). During sealing process, alignment is very important because it can affect seriously on the PDP screen quality. This study suggests redesigned clips to improve PDP panel alignment and also shows stabilization of clips in a high temperature during sealing process.