• 소성∙가공
• /
• 제9권4호
• /
• pp.413-420
• /
• 2000

In the die casting process, the flow of liquid metal has significant influence on the quality of casting products and die life. For the optimal process design of front housing part of aircon compressor, various analyses were performed in this study by using computer simulation code, MAGMAsoft. The simulation has been focused on the molten metal behaviors during the filling and solidification stages for the sound casting products. Two cases of casting design that have different types of gating system are considered in the analysis. The potential sites where the casting defects may occur is examined by computer simulation and an improved design process is proposed. Also the effect of partial squeeze on the quality of casting products is considered and the optimal time lag after filling process is determined. For the die-stability, the effect of operational parameters such as die temperature, heat cycle and spot cooling on the die life has also been analyzed.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2001년도 학술발표대회논문집
• /
• pp.33-38
• /
• 2001

The types of the multi-family housing are classified into the independent type, the mixed type and the public type by the approaching method. The characteristics of the independent type are the rear layout type(41.66%), the "ㅋ"type(56.14%), and the 2-room type(54.54%). In the mixed one, they are the front layout type(36.84%), the "ㄱ"type(42.10%), and the 1-room type(49.60%) and in the public one they are the front layout type(51.61%), the "ㅡ"type(41.99%). and the 1-room type(84.11%). It is found that the housing types are gradually tuned into the multi-family housing such as the independent house in the urban area due to changing the major independent type(82.60%) in the early of the 1990s to the public type(74.19%) in the end of the 1990s.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2004년도 추계학술발표대회 논문집
• /
• pp.31-35
• /
• 2004

The The purpose of this study was to compare of the characteristics of floor plan and housing satisfaction with two types of housing units, 2-bay and 3-bay. Two bay housing unit is one that two rooms, a bedroom and a living room, are in the front side of housing unit, and 3-bay is one that three rooms such as two bedrooms and a living room are in the front side. 15floor 85m$^2$-sized plans of housing unit were analyzed. There were differences in the arrangement of entrance, balcony, and bathrooms between two types of housing units. The subjects were 200 housewife who lived in 2-bay housing unit and 200 ones in 3-bay one. The residents who lived in 3-bay were younger, higher education and income level, and more home ownerships than ones in 2-bay. The residents in 3-bay were more satisfied with their housing unit than in 2-bay.

• 한국주거학회논문집
• /
• 제12권4호
• /
• pp.9-17
• /
• 2001

The purpose of this study is to perform the post occupancy evaluation in apartment housing with the dining room and kitchen(DK) facing the front side, and then to compare them with findings in unit plan facing the back side. A questionnaire survey method was used in this study. These questionnaires were administered, along with an interview, of 200 households in the apartment of 27-28 pyoung($76.50-78.54\textrm{m}^2$), in Gwangju city. Those living in an apartment with DK facing the front side tend to be less satisfied with the physical feature factors. expecially for layout of rooms, location of second bedroom and master bedroom, size and location of storage spaces, and location and size of balcony than those with the DK facing the back side.

• 한국주거학회논문집
• /
• 제20권4호
• /
• pp.1-9
• /
• 2009

In this study, an examination and an analysis are carried out on the forms and components of the access spaces of hotel entrances from the front gate of five star hotels in Jejudo, Korea. The results of the study are as follows. In terms of the arrangement of the hotel, city hotels with a relatively narrow site area are influenced by site shape, while resort hotels with a relatively wide site area are affected by the environment. However, the location of the front gate was determined by the access road from the outside. Therefore, forms of access space are related to the front gate, which is governed by the access road, and to the entrance, which is determined by the hotel arrangement. If the front gate is in line with the hotel entrance, a straight line and the hotel are arranged vertically to the front gate(side arrangement) or the hotel is arranged horizontally to the front gate, but if the entrance is not in line with the front gate, it appears as a curved shape. However, those who use their own cars have a variety of choices for access route depending on the location of the parking lot.

• 건축역사연구
• /
• 제14권4호
• /
• pp.73-86
• /
• 2005

The purpose of this study is to prove the correlations among various factors what determined to formation of front elevation proportion system through making an actual survey and investigating. According to the analysis of them, we make conclusions as follows; 1, On the assumption that average distance of 1Kan(間) is 1, the height of foundation is 0.21, the height of floor from foundation is 0.24, the height of normal column from floor is 0.85, the height of eaves from foundation is 1.10. 2. Southeast faced buildings are wider than southwest faced buildings in the distance of 1Kan (間) in the range of $110{sim}220mm$. The height of foundation and floor in the southeast faced buildings are higher than those in southwest faced buildings beside the height of normal column, eaves, high column in the southwest faced buildings are higher than those in southeast faced buildings. 3. As number of front Kan(間) increases, the distance of 1Kan(間) decrease and the height of eaves and high column(高柱) increases. This is cause of making a maximum needed inner space by increasing the distance of 1Kan(間). This is an wisdom for living from ancestors. 4. As number of Dori(道里) increases, the distances of 1Kan are nearly same but the height of eaves and high column(高柱) increases about 300mm, This is a natural result from an increasing of building scale. 5. The distance of 1Kan(間) in later 19C building is most wide but, the unit heights are minimal average values at year 1900 as a reference mark. After this, the height of normal column, eaves, high column are higher about $170{sim}330mm$. 6. The number of Kan in front elevation, Dori(道里), and direction of building have correlations each other in proportion system of traditional housing An-Chae with significant level, p<0.05.

• 한국주거학회논문집
• /
• 제17권6호
• /
• pp.27-35
• /
• 2006

The purpose of this study is to analyze about perception and preference degree of resident's for environmental moulding. We will find factors effected to utilization of residents. So we should extract characteristics in the way of an association factors. The analysis result of this study is as follows: First, We could know that they consider form and establishment position to be the most important factors a using environment moulding in a housing complex. Second, it is high that preference degree at environmental moulding of figurative shape located in front of main entrance harmonized with gardening. Third, it is high that preference degree at environmental moulding of abstract shape located in front of a pray ground. Finally, environment moulding of mixing form appeared highest preference degree at parking lot entrance location. As valued result of this thesis, the result of environment moulding and surrounding as harmony form is going to utilize to basic to establish in a housing complex. furthermore, This research increase dwelling peoples' satisfaction as well as arrangement of environmental moulding and is expected that is going to give affirmative effect that can enhance quality of a housing complex.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제10권2호
• /
• pp.107-115
• /
• 2004

In this paper, the all units of residential housing that is not legislated in facility development law are analyzed and foreign design criteria that is related to barrier-free unit housing is comparing to domestic. Through the comparison in front door, living room, bathroom, bedroom, and kitchen, this paper aims to suggest internal barrier-free design criteria. This paper is limited to internal housing which are front door, living room, bedroom, bathroom, and kitchen. Also, the objectives of facility development law are U.S, Japan, German, and in case of U.S, UFAS is established by ADA, in Japan, Heart Building law and detail standard drawing are used, in German, DIN is used. The objective of domestic case study is the latest residential housings that are built over 2003. The flow of study is as follows ; First, the internal items of residential housing are abstracted, and each item is checked in facility development law that is legislated in. Next, through comparison of domestic and foreign facility development law related to housing, common items are abstracted and detail standards are defined. Domestic residential housings are analyzed in those standards. Finally, the problems that is the result of analysis are analyzed and the barrier free design criteria is abstracted in unit housing. Also, more developed items and future study are suggested.

• 한국주거학회논문집
• /
• 제13권4호
• /
• pp.1-10
• /
• 2002

The purpose of this study was to contribute to planning and developing various new apartment unit plans of the future through examining the differences on the spatial behavioral patterns and the post-occupancy evaluation between DK-front type and DK-rear type. 245 households which were included 79 DK-front types and 166 DK-rear types, were collected and analyzed at Masan and Gimhae cities in Kyungnam area. The result is as follows: 1) The analysis of the spatial behavioral patterns revealed that Anbang was the room for the couple independent from guests and children. Living room was the family's room for every activity, used more frequently DK-front types than DK-rear types. The family lift cycles of households, the visual unification between Living room and DK, the closed figures of DK in DK-front types have been influenced for the activities of Living room. 2) In the post-occupancy evaluation, DK-front types were positive in the lighting of DK area and its connection with Living room, while negative in the proximity from entrance to DK, cooking convenience, and the proximity between rooms. It was explained clearly through the reasons of the rejection of DK-front types from now.

• 한국주거학회논문집
• /
• 제26권6호
• /
• pp.139-146
• /
• 2015

In this study, the plane type of main building relics of unified Silla period house site which excavated in Gyeongju city after 1990s was classified and the architectural characteristic of them was investigated. The chronology of building relics in Silla capital city site was mostly known as 8-9th century, and by standard of column arrangement, the plane types of them could be classified as grid type, front veranda-grid type, outer column type. The outstanding characteristic of plane is wide span and open front veranda. In most relics the span were over 4 meters, and inner foundations for small post and strip foundation were found between columns. The front veranda added type buildings were composited of enclosed main room and open front veranda, and column arrangement of them dose not fall into line in most case. Thus it thought that the structures of enclosed main room and open front veranda were independent. The interior space of enclosed main room were divided two rooms by partition wall in some case. In this case, one room is enclosed by wall, and the other room has open front side. This plane is considered for the pleasant life in cold winter and hot summer.