• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.220-230
• /
• 1993

Photoelastic isochromatic fringes related to the difference of principal stresses have some bandwidth whose light intensities are not constant and asymmetrical in experimental images. Hence, it is difficult to measure fringe order accurately at a data point by visual observation. In this study, a method of fringe sharpening, which can extract shapened lines from both full-and half-order fringes by digital image processing, is developed. To test the method, various simple photelastic fringe patterns are simulated and their images are processed to yield sharpened lines. The method is then applied to general problems such as images of a circular disk compressed by diametrically concentrated loads and a circular cylinder sybject to internal pressure. The procedure is proved to be capable of extracting sharpened lines accurately from photoelastic isochromatic fringes.

• 한국통신학회논문지
• /
• 제30권11C호
• /
• pp.1053-1059
• /
• 2005

컴퓨터 생성 홀로그램(CGH, Computer Generated Hologram)은 광 홀로그램의 간섭 패턴 대신 3차원 영상을 재생하는데 필요한 정보만을 컴퓨터로 설계 및 제작하기 때문에 물리적으로 존재하지 않는 가상의 물체의 합성 및 생성이 가능하다. 하지만 CGH를 통해 생성된 fringe 영상은 그 데이터양이 방대하기 때문에 저장, 전송 및 처리를 위해서는 데이터양을 줄일 필요성이 있다. 하나의 객체를 나타내기 위한 Fringe 영상의 데이터양을 줄이는 가장 효율적인 방법은 부호화 과정이다. 본 논문에서는 효과적인 부호화를 위해 fringe 영상을 2차원 영상으로 가정한 후에 DCT(Discrete Cosine Transform)에 비해서 좋은 주파수 변환 특성을 보이는 DWT(Discrete Wavelet Transform)을 도입하여 Fringe 영상의 주파수 특성을 분석하였다. 그리고 분석된 주파수 특성을 기반으로 Fringe 영상을 웨이블릿 기반의 코덱들을 이용해 압축한 결과 Yoshikawa(2)나 Thomas(3)에 의한 방법에 비해 최대 약 2배의 압축율을 가질 수 있어 Fringe 패턴을 압축하는 좋은 방법이 될 수 있다는 것을 확인하였다.

• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1534-1541
• /
• 2003

A new window-based, user-friendly fringe analysis system is developed, especially for analyzing noisy interferograms. The system integrates three major techniques, that is fringe tracking, Phase shifting, and Fourier transform, into a single shell by employing a unified procedure. Since the system is made in a modular fashion and all processing modules can be shared for any technique, a user can select necessary modules and easily edit the applying order of them based on the user's analysis strategy, which should be changed depending on the noise level of the image. The system provides a high-level GUI and a variety of image handling tools and therefore users can easily access the system and produce the optimal results without giving up in the middle of a process even for severely noise-contaminated interferometric images.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2577-2584
• /
• 1994

A method of digital image processing thechnique, which can multiply and sharpen isochromatic fringes in photoelasticity on both occasions, is developed. To test the method, photoelastic fringe patterns of a disk compressed by two diametrically opposite cocentrated loads are simulated and these patterns are processed to yield sharpened lines. The method is then aplied to measurement of residual stresses in glass bar. The procedure is proved to be capable of extraction sharpened lines accurately from photoelastic multiplied fringes, and yields good experimental results consistently and precisely.

• 한국전기전자재료학회논문지
• /
• 제18권8호
• /
• pp.720-723
• /
• 2005

We studied the quantitativity of the image sticking which is occured by the resicual DC in the fringe-electric field switching (FFS) mode. Actually, in the FFS mode driven by the strong fringe electric field, the asymmetric residual DC was formed in the bottom substrate. It made the impurity ion stick to the alignment layer such as polyimde layer. Thus, the differnece of the luminance existes after the stress check pattern is applied to the panel so that we can see the image sticking. This image sticking decreases as the residual DC value between specific patterns decreases. Therefore, it is necessary to control the residual DC for the FFS mode with the high image quality. It is possible to eliminate the image stiking when the extra pixel voltage is applied through the circuit tunning for reducing the difference of residual DC accroding to the panel position.

• Journal of Mechanical Science and Technology
• /
• 제17권11호
• /
• pp.1704-1713
• /
• 2003

Point contact film thickness in elastohydrodynamic lubrication (EHL) is analyzed by image processing method for the images from an optical interferometer with monochromatic incident light. Interference between the reflected lights both on half mirror Cr coating of glass disk and on super finished ball makes circular fringes depending on the contact conditions such as sliding velocity, applied load, viscosity-pressure characteristics and viscosity of lubricant under ambient pressure. In this situation the film thickness is regarded as the difference of optical paths between those reflected lights, which make dark and bright fringes with monochromatic incident light. The film thickness is computed by numbering the dark and bright fringe orders and the intensity (gray scale image) in each fringe regime is mapped to the corresponding film thickness. In this work, we developed a measuring technique for EHL film thickness by dividing the image patterns into two typical types under the condition of monochromatic incident light. During the image processing, the captured image is converted into digitally formatted data over the contact area without any loss of the image information of interferogram and it is also interpreted with consistency regardless of the observer's experimental experience. It is expected that the developed image processing method will provide a valuable basis to develop the image processing technique for color fringes, which is generally used for the measurement of relatively thin films in higher resolution.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.127-133
• /
• 2001

Photoelastic isochromatic fringes related to the difference of principal stresses have some bandwidth whose light intensities are not constant and unsymmetrical in experimental image. Hence it is difficult to measure fringe order accurately at a data point by visual observation. In this study, the method of fringe sharpening, which can extract sharpened lines from both full-and half-order fringes by digital image processing, is developed. To test the method, various simple photoelastic fringe patterns are simulated and their image are processed to yield sharpened lines. The method is than applied to general problem such as image of a circular disk compressed by concentrated loads and a cylinder subjected to internal pressure. The procedure is proved to be capable of extracting sharpened lines accurately from photoelastic isochromatic fringes.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.103-113
• /
• 1999

Point contact film thickness in elastohydrodynamic lubrication (EHL) is analyzed by the image processing method for the monochromatic incident light. Interference between the reflected lights both on Cr coating of glass disk and on super finished ball makes circular fringes, which are regarded as film thickness together with numbering of fringe order. In this study, we developed technology to measure the film thickness by analyzing dark and bright intensity waves which results from monochrome green light. Two typical fringe patterns only with intensity values 3re examined for the measurement of point contact EHL film thickness. We expect that this technology will give valuable clue to improve color image processing analysis for high resolution of EHL film thickness with white incident light.

• 비파괴검사학회지
• /
• 제19권3호
• /
• pp.200-206
• /
• 1999

광탄성법을 이용하여 인장하중을 받는 곡선보의 중앙에서 하중축과 직교하는 일직선상에 축방향 응력성분을 측정하였다. 광탄성 데이터의 정밀 측정을 위하여 영상처리 시스템을 이용, 원래의 프린지를 명시야 배열과 암시야 배열의 등색선프린지로부터 2배로 증식시키고 세선처리를 하였다. 세선처리된 광탄성 영상으로부터 1/4차수(N=0. 1/4, 2/4. 3/4. 1, 5/4...)마다 프린지 차수를 읽을 수 있으므로 정확한 위치에서 정량적인 측정이 가능하다. 광탄성 실험에서 곡선보의 인장 하중을 3종류로 변화하였을 때 이론식에 의한 응력분포와 일치하는 경향을 나타냈으나, 장탄성법에 의한 측정결과는 이론값과 8%이내의 차이가 나타났다. 이러한 원인은 광탄성 시험편 가공시 하중축과 치수가 이론식에 적용된 조건과 다소 상이한 것으로 판단되며, 정밀하게 가공된 시험편을 사용하여 측정할 경우 실험에 의한 오차는 감소될 것으로 추정된다. 이 실험으로부터 광탄성법에 의한 응력측정시 프린지 증식 및 세선처리 기법을 적용할 경우 정밀한 응력측정이 가능함을 확인할 수 있었다.

• 대한전자공학회논문지
• /
• 제26권8호
• /
• pp.1282-1289
• /
• 1989

Dual field speckle interferometry that is sensitive to the surface displacement of the object is constructed, and fringe patterns that have the displacement-informations are analysed using digital image processing. From 10\ulcorner to 80\ulcorner with respect to each specklegrams are obtained by double-exposure techniques, which are analysed by the proposed system and algorithm. Up to 10\ulcorner displacement, near measurable lower bound of Speckle Interferometry, fringe visibility is decreased due to decreasing fringe density, therefore relative errors are produced over 10% but over that displacement, relative errors are produced below 5%. Particularly, it is observed that spatial frequencies of each displacement are comparatively linear.