• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.324-328
• /
• 2003

Water-lubricated frictional characteristics of stainless steel ball bearing is not well known compared to oil-lubricated frictional characteristics. Furthermore study on friction at high temperature is rare because bearing maintenance strategy for water-lubricated or chemicals-lubricated bearings of equipment is mostly based on change of failed bearings and parts. Ball bearings and ball screw are installed on the power transmission for a developing integral reactor and these are lubricated with high temperature and high pressure chemically-controlled pure water. Bearings and power transmitting mechanical elements for an atomic reactor needs high reliability. and high performance during estimated lifetime, and it should be verified. In this paper, experimental research results of frictional characteristics of water-lubricated ball bearing as a preliminary investigation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.877-881
• /
• 2002

Much research efforts have been made on the equal channel angular pressing(ECAP) which produces ultra-fine grains. In this paper the ECAP processes with Zr-702 alloy at elevated temperature and at room temperature are considered. Both two-dimensional and three-dimensional finite element analyses have been employed to investigate the deformation behaviors of specimen during ECAP process.

• 대한기계학회논문집A
• /
• 제37권7호
• /
• pp.905-912
• /
• 2013

고무는 독특한 점탄성적 성질로 인하여 여러 분야에서 광범위하게 사용되고 있다. 고무의 마찰은 지속적인 지면과의 접지로 인하여 발생되고, 결과적으로 마모가 발생한다. 이때 마찰에 의해 발생되는 마찰에너지는 마모 메커니즘의 중요 요인으로, 마찰에너지는 온도, 지면의 거칠기, 형상, 하중, 물성 등의 조건에 영향을 받는다. 본 연구에서는 마찰에너지에 대한 수직 하중과 수평 이동속도의 영향을 ABAQUS/explicit을 이용하여 해석하였고, 접지압, 전단력과 슬립 거리를 이용하여 마찰에너지를 계산하였다. 또한 실제 고무의 거동에 대한 실험 결과와 해석 결과를 비교하였다.

• 한국산학기술학회논문지
• /
• 제15권1호
• /
• pp.488-494
• /
• 2014

마찰진자형 면진받침은 마찰면의 곡률반경과 중력에 의해 생성되는 고유 복원력과 마찰에 의한 감쇠력을 갖는다는 장점이 있지만, 마찰계수의 속도, 상재압 및 온도 등에 대한 의존성으로 거동에 대한 예측이 쉽지 않다. 본 연구에서는 각 기준에서 제시된 마찰진자형 받침의 설계 및 해석절차를 분석하여 추가적인 검토가 필요한 사항들에 대해 평가해 보았으며, 추가로 동일한 동특성을 갖는 납-고무 면진받침 시스템을 이용한 해석결과와 마찰진자형 면진받침 시스템의 해석결과를 비교하여 마찰진자형 면진받침이 갖는 상대적인 거동 특성을 비교 분석해 보았다.

• Tribology and Lubricants
• /
• 제24권4호
• /
• pp.190-195
• /
• 2008

Many researchers have tried to improve the tribological characteristics of lubricant by adding various nano particles in the base lubricant. But the reliability evaluation of the lubricants are rarely performed in its real operation condition. In this study, the physical property and the tribological characteristics of the graphite nano lubricant were evaluated and compared with raw lubricant after thermal degrading. In order to evaluate the tirbological characteristics, the disk-on-disk tribotester was adopted to measure the friction coefficient of the graphite nano lubricants. Also the temperature variations of friction surfaces were measured by the thermocouple installed on the fixed plate in the test chamber of the tribotester. The kinematic viscosity was measured using a capillary viscometer on the temperatures of 40, 60 and $80^{\circ}C$. The results showed that the graphite nano lubricant had lower friction coefficient and less wear on the friction surfaces than raw lubricant. After thermally degrading, the friction coefficients of graphite nano lubricant increased, but the friction coefficients after thermal degradation were still maintained lower than those of raw lubricant.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.189-193
• /
• 2008

Performance of refrigerant oil at the thrust-bearing and at the journal-bearing of a scroll compressor is a significant factor. This paper presents the friction and anti-wear characteristics of nano oil with a mixture of a refrigerant oil and carbon nano particles in the journal bearing of scroll compressors. The characteristics of friction and anti-wear using nano-oil is evaluated using the disk on disk tester and the journal bearing tester for measuring friction surface temperature and the coefficient of friction at the journal bearing tester. In journal bearing test, the average friction coefficient of high concentration nano-oil was decreased down to 18% compared to raw oil under 4,500 N and 3,600 rpm. It is believed that nano particles can be coated on the wear surfaces and the interaction of nano particles between surfaces can be improved the lubrication in the friction surfaces. Worn surfaces of frictional specimen were measured with straightness. carbon nano oil enhances the characteristics of the anti-wear and friction at the joural bearing of scroll compressors.

• 대한기계학회논문집A
• /
• 제39권8호
• /
• pp.765-772
• /
• 2015

주철은 산업현장에서 중장비나 철도차량 등과 같은 다양한 기계장치의 주재료로 널리 사용된다. 이러한 기계장치의 운전 성능은 접촉 특성에 따라 크게 좌우되며 이를 개선시키기 위한 연구들이 진행되고 있다. 본 연구에서는 모래와 알루미나 입자가 주철의 마찰/마모 특성에 미치는 영향에 대해 다양한 조건에서의 미끄럼 실험을 통해 규명하였다. 입자의 크기 및 시편 온도 등을 변수로 하여 스틸 볼이 pin 으로 장착된 pin-on-reciprocator 방식의 트라이보테스터를 사용하여 실험을 진행하였다. 주사전자현미경(Scanning Electron Microscope), confocal microscope 와 3d profiler 를 이용해서 주철 시편과 스틸 볼의 마모 표면을 관찰하고 마모량을 정량적으로 측정하여 마모 특성을 파악하였다. 실험 결과 주철의 마찰/마모 특성은 입자 주입에 의해 크게 달라짐을 알 수 있었다. 또한, 주철 시편에 가해준 온도에 따라 마찰/마모 특성이 크게 달라지는 것을 확인하였다. 이 연구의 결과는 산업에서 주철 재료의 트라이볼로지 특성을 이해하는데 도움이 될 것이다.

• KSTLE International Journal
• /
• 제2권2호
• /
• pp.120-126
• /
• 2001

Performance requirements for automatic transmission fluids have been changed reflecting the design changes of automatic transmissions. The major purpose of these design changes is concentrated upon improvements of both fuel economy and drivability. In order to formulate such high performance ATFs as satisfy those requirements, it is necessary to use high quality base oils like VHVI base oils and PAOs. In this study, the effect of base oils characteristics on ATF performance is investigated, mainly regarding differences in frictional characteristics with deterioration. Frictional characteristics are determined using the SAE No. 2 machine and ATFs are deteriorated under various controlled conditions. Moreover low-temperature fluidity, oxidation stability, and seal compatibility are also compared for four different ATFs. From the investigation, it was found that the use of Group III and IV base oils in ATFs gives several benefits with respect to low temperature viscosity, oxidation stability and SAE No.2 friction characteristics.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.87-88
• /
• 2002

To analyze complicated phenomena on the fluid hydrodynamic and the elastic deformation between sliding body surfaces, an analysis to the elastohydrodynamic lubrication of sliding contacts has been developed taking into account the thermal and non-Newtonian effects. The computational technique handled the simultaneous solution of the non-Newtonian hydrodynamic effects, elasticity, the load, the viscosity variation, and temperatures rise. The results included the lubricant pressure profile, film thickness, velocity, shear stress, and temperature distribution, and the sliding frictional force on the surface at various slip conditions. These factors showed a great influence on the behavior resulted in the film shape and pressure distribution. Especially, Non-Newtonian effects and temperature rise by the sliding friction force acted as important roles in the lubrication performance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.253-254
• /
• 2016

This paper proposes a novel starting method of a high speed induction motor with air bearings for turbo blowers. The friction of air bearings varies according to rotating speed, operating temperature and usage time. Specially, friction torque at initial starting state under low bearing temperature usually results in starting failures of the conventional V/F control method. Therefore, this paper proposes a new starting method, which consists of an initial I/F control mode and smooth transition method to V/F control mode to overcome the starting failure. The experimental results are shown to verify the analysis and the usefulness of the proposed method.