• 로봇학회논문지
• /
• 제14권4호
• /
• pp.311-317
• /
• 2019

Direct teaching is an essential function for collaborative robots for easy use by non-experts. For most robots, direct teaching is implemented only in joint space because the realization of Cartesian space direct teaching, in which the orientation of the end-effector is fixed while teaching, requires a measurement of the end-effector force. Thus, it is limited to the robots that are equipped with an expensive force/torque sensor. This study presents a Cartesian space direct teaching method for torque-controlled collaborative robots without either a force/torque sensor or joint torque sensors. The force exerted to the end-effector is obtained from the external torque which is estimated by the disturbance observer-based approach with the friction model. The friction model and the estimated end-effector force were experimentally verified using the robot equipped with joint torque sensors in order to compare the proposed sensorless approach with the method using torque sensors.

• 한국기계가공학회지
• /
• 제20권11호
• /
• pp.43-51
• /
• 2021

A robust tracking controller design was developed for a rotary motion control system. The friction force versus the angular velocity was measured and modeled as a combination of linear and nonlinear components. By adding a model-based friction compensator to a nominal proportional-integral-derivative controller, it was possible to build a simulated control system model that agreed well with the experimental results. A zero-phase error tracking controller was selected as the feedforward tracking controller and implemented based on the estimated closed-loop transfer function. To provide robustness against external disturbances and modeling uncertainties, a disturbance observer was added in the position feedback loop. The performance improvement of the overall tracking controller structure was verified through simulations and experiments.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 추계학술대회 논문집
• /
• pp.192-197
• /
• 1992

The position error in multi-axis machine tools are due to many elements, such as the static friction, servo lag, a nonlinear disturbance, the gain mismatch between multi-axis controllers. In the work, modeling for the plant was carried out through the velocity response by the step input signal. Digital PI controllers, LQ optimal controllers and feedforward controllers are designed for a high tracking performance based on the model. The results of experimentation showed that the controllers worked properly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.186-188
• /
• 1995

In this paper, Cross-Coupled Controller proposed for multi axes servo system. Tracking error and contouring error exist when a machine tool moves along the trajectory in multi exes system. The proposed scheme enhances the contouring performance by reducing contour error. Feedforward compensator reduces the effects of a nonlinear disturbance such as friction or dead zone. The proposed control scheme reduces the contour error which occured when the tool tracks the reference trajectory. Simulation results show that this scheme improves the contouring performance along the reference trajectory in XY-table.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.517-522
• /
• 2000

When a real robot manipulator is mathematically modeled. uncertainties are not avoidable. The uncertainties are often nonlinear and time-varying. The uncertain factors collie from imperfect knowledge ok system parameters. payload change. friction. external disturbance. and etc. In this paper. we propose a class of robust hybrid controls of manipulators without knowing the exact stiffness and provide the stability analysis. Simulation results are provided to show the effectiveness of the algorithms.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.507-507
• /
• 2000

In this paper, a kind of limit cycle of an inverted pendulum system is discussed. We propose a stabilization control law for such a limit cycle of an inverted pendulum system that the pendulum rotates periodically. Besides, the stabilization control law is extended so as to ensure not only stability of the limit cycle but also an L$_2$-gain disturbance attenuation in the presence of modeling error and viscosity friction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.452-455
• /
• 2003

Based on a field-oriented model of induction motor, adaptive backstepping approach using neural network(RBFN) is proposed for the control of induction motor in this paper. In order to achieve the speed regulation with the consideration of avoiding singularity and improving power efficiency, rotor angular speed and flux amplitude tracking objectives are formulated. rotor resistance uncertainty is compensated by adaptive backstepping and mechanical lumped uncertainty such as load torque disturbance, inertia moment, friction by RBFN. Simulation is provided to verify the effectiveness of the proposed approach.

• Geomechanics and Engineering
• /
• 제29권2호
• /
• pp.113-131
• /
• 2022

A rockburst is a common disaster in deep-tunnel excavation engineering, especially for high-geostress areas. An anomalously low friction effect is one of the most important inducements of rockbursts. To elucidate the correlation between an anomalously low friction effect and a rockburst, we establish a two-dimensional prediction model that considers the discontinuous structure of a rock mass. The degree of freedom of the rotation angle is introduced, thus the motion equations of the blocks under the influence of a transient disturbing force are acquired according to the interactions of the blocks. Based on the two-dimensional discontinuous block model of deep rock mass, a rockburst prediction model is established, and the initiation process of ultra-low friction rockburst is analyzed. In addition, the intensity of a rockburst, including the location, depth, area, and velocity of ejection fragments, can be determined quantitatively using the proposed prediction model. Then, through a specific example, the effects of geomechanical parameters such as the different principal stress ratios, the material properties, a dip of principal stress on the occurrence form and range of rockburst are analyzed. The results indicate that under dynamic disturbance, stress variation on the structural surface in a deep rock mass may directly give rise to a rockburst. The formation of rockburst is characterized by three stages: the appearance of cracks that result from the tension or compression failure of the deformation block, the transformation of strain energy of rock blocks to kinetic energy, and the ejection of some of the free blocks from the surrounding rock mass. Finally, the two-dimensional rockburst prediction model is applied to the construction drainage tunnel project of Jinping II hydropower station. Through the comparison with the field measured rockburst data and UDEC simulation results, it shows that the model in this paper is in good agreement with the actual working conditions, which verifies the accuracy of the model in this paper.

• 대한기계학회논문집A
• /
• 제40권1호
• /
• pp.1-8
• /
• 2016

본 논문에서는 기존의 관성안정화 플랫폼에서 보편적으로 사용됐던 PID 제어에 외란관측기를 적용하는 알고리즘 제안한다. 외란관측기 알고리즘을 적용하기 위하여 직접구동 모터로 구동되는 안정화 플랫폼 축의 관성모멘트와 축 마찰 특성을 실험적으로 구하고, 시뮬레이션과 실험결과를 비교하여 정확도를 검증하였다. 또한 차수와 상대차수가 다른 여러 가지 Q-filter 적용실험을 통하여 필터 특성에 따른 시스템의 안정성을 확인하였다. 본 논문에서 제안한 알고리즘은 6 자유도 시뮬레이터를 이용하여 차량 모션 인가실험을 통해 이중 PID 제어 루프의 결과와 비교/검증하였다.

• 한국철도학회논문집
• /
• 제16권5호
• /
• pp.379-385
• /
• 2013

본 연구에서는 IGM 구간에서 주면마찰력을 활용하여 지지력을 확보하기 위해 선단부에만 부분적으로 현장타설말뚝을 시험시공하고 IGM 이론의 적용성을 분석하였다. 시험시공 현장의 지반조사와, 교란여부, 거칠기 상태를 측정하여 IGM 이론 적용을 위한 지반특성을 점성, 비교란, 매끄러운 상태로 분석하였다. 또한, 정재하시험 및 하중전이시험을 통해 허용지지력과 심도별 주면마찰력을 산정한 결과, 주면마찰력은 심도가 깊어질수록, 기준침하량이 클수록 증가하는 것으로 평가되었으며, 심도와 매우 높은 상관성을 보였다. 일축압축강도($q_u$)는 점성 IGM에서 가장 중요한 변수이나, 화강풍화암 구간에서 직접 측정이 불가능하므로 정재하시험 및 하중전이시험 결과와 N값을 이용하여 $q_u$값을 얻을 수 있었다.