• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.70-71
• /
• 2004

40nm의 해상도를 갖는 연 X-선 결상현미경 시스템의 광학계를 결정하였다. 연 X-선 장치에서의 대물렌즈로써 대상시료내에 빔 초점(focusing)를 위한 광학계로 두개의 Ellipsoid형 광하계로 설계하였다. 또한 접안렌즈로는 Fresnel zone plate로 하여 설계 및 제작하였다. 또한 연 X-선이 지나가는 빔 경로 상에 놓여진 다양한 물질들에 대한 각각의 X-선 광자의 조사선량을 계산하였다. 살아있는 세포를 관찰하고자하는 본 장치의 목적에 부합되기 위한 세포가 피폭되는 임계 방사선 조사선량의 관점에서 연 X-선의 선원의 세기와 검출기의 증폭효율을 고찰하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.536-540
• /
• 2003

A new concept of adaptive focusing, using a Rotman lens, is presented in this paper. A Rotman lens is a microwave lens which is able to focus microwave power on its focal arc or generate multiple beams. By adding the array of phase shifters between a Rotman lens and antenna elements, the wavefront can be adaptively modulated to focus objects distributed in short range rather than far-field zone. From the optical point of view, the propagations of the lens have been simplified from the Fresnel diffraction integral to the Fourier transform. Using Fourier Transform, a beam propagation method has been developed to show improvement of the resolution by controlling wavefront of wave propagating from an aperture-type antenna array. The beam width(or spot size) and intensity have been calculated for a focused beam propagating from an array having $10{\lambda}$ of its size. For the beam with $20{\lambda},\;30{\lambda}$, and $50{\lambda}$ of geometrical focal length, the half-power beamwidth (spot size) is about $1.1{\lambda},\;1.3{\lambda}$, and $1.9{\lambda}$, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.10
• /
• pp.799-804
• /
• 2018

In this paper, a method for measuring the dielectric constant of a planar dielectric substrate using the free space material constant measurement method in a general measurement environment is proposed. Two horn antennas and a network analyzer were used for S-parameter measurement and the transmission and reflection coefficients of a planar dielectric substrate were calculated from the measurement results. To obtain a reliable dielectric constant in a low-precision-measurement environment, only the magnitude of the transmission coefficient, which has a small error due to the measurement environment, is used for dielectric constant estimation. Finally, the dielectric constant is determined by comparing the measured results at different frequencies.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.5 s.182
• /
• pp.190-196
• /
• 2006

Transparent materials are widely used in the fields of optic parts and bio industry. We have experiment to find out the characteristics of the micromachining inside transparent materials using femtosecond laser pulses. With its non-linear effects by very high peak intensity, filament (plasma channel) was formed by the cause of the self-focusing and the self-defocusing. Physical damage could be found when the intensity is high enough to give rise to the thermal stress or evaporation. At the vicinity of the power which makes the visible damage or modification, the structural modification occurs with the slow scanning speed. According to the polarization direction to the scanning direction, the filament quality is quite different. There is a good quality when the polarization direction is parallel to the scanning direction. For fine filament, we could suggest the conditions of the high numerical aperture lens, the short shift of focusing point, the low scanning speed and the low power below 20 mW. As the examples of optics parts, we fabricated the fresnel zone plate with the $225{\mu}m$ diameter and Y-bend optical wave guide with the $5{\mu}m$ width.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.66-79
• /
• 2005

In this paper, we have performed the analysis of RF transceiver system and communication link for the improvement in reliability of Smart-UAV(Unmanned Aerial Vehicles) Data-Link. The system analysis performed using the development specification of the data link and data sheet of using components through the system simulation tool that is Agilent EEsof ADS. Also, the communication link analysis peformed using a variety of propagation models for the smart UAV operation environments. As a result, we have presented problems appeared in the simulation results and development specification. As well as, we have presented about several problems and consideration issue for system design through the communication link analysis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.51-53
• /
• 2011

Data collection and classification of products for factory automation is one of important processes. If conveyor systems corresponding to factory automation have crossroads, a lot of difficulties arise. These issues can be solved by using Zig-Bee technology capable of network configuration. Network with Zig-Bee is configured to coordinators, routers, and end-device. And Zig-Bee for up to 65,536 network formation is possible. In this paper, system to transmit the data of RFID tag to the host PC has been implemented, after connecting multiple EM4095 RFID system to Zig-Bee transmitter/receiver system.

• Geophysics and Geophysical Exploration
• /
• v.7 no.4
• /
• pp.245-250
• /
• 2004

Horizontal-axes on the seismic section have been represented in a distance unit by applying horizontal-distance correction transformation on a 2-D seismic section of single channel marine seismic data. By drawing horizontal-axes in a distance unit, distortion of horizontal distances shown on the seismic section when the ship speed varies during a survey can be diminished considerably. Position information obtained by GPS and stored in each trace of seismic data as well as data collection windows were used for horizontal distance correction. The minimum window length was decided by considering ship speed and shot interval, and the maximum window length wat determined by reflecting radius of the 1st Fresnel zone. In choosing an optimum window length, horizontal resolution and stacking effect were considered simultaneously. By applying horizontal distance correction we could get a 2-D seismic section which is considered at reflecting the real subsurface structure analogously.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.607-613
• /
• 2015

In order to design M/W(microwave) short backhaul above 10 GHz to meet the increase in mobile traffic demand, the rain attenuation as well as the atmospheric conditions such as Earth bulge and Fresnel zone should be considered. In this paper, the path lengths have been estimated theoretically in various frequency bands using the Korean standard rain rate, and an example of path profile has been analyzed in urban area utilizing spectrum management intelligence system (SMIS). These derived minimum path lengths in various frequency bands are compared to the foreign them, and then will be proposed to improve the Korean minimum path length unitized to 10 km. This paper will provide useful information for microwave engineers in designing a M/W access link, and be utilized to make an efficient usage of high frequency bands for the short mobile broadband backhaul.

• Journal of Advanced Navigation Technology
• /
• v.2 no.2
• /
• pp.132-142
• /
• 1998

In optical scanning holography, 3-D holographic information of an object is generated by 2-D active optical scanning. The optical scanning beam can be a time-dependent Gaussian apodized Fresnel zone plate. In this technique, the holographic information manifests itself as an electrical signal which can be sent to an electron-beam-addressed spatial light modulator for coherent image reconstruction. This technique can be applied to 3-D optical remote sensing especially for identifying flying objects. In this paper, we first briefly review optical scanning holography and analyze the resolution achievable with the system. We then present mathematical expression of real and virtual image which are responsible for holographic image reconstruction by using Gaussian beam profile.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4C
• /
• pp.524-532
• /
• 2004

In this paper, an incoherent holographic 3D imaging and display system based on the modified triangular and Mach-Zehnder interferometers is optically implemented and some experiments are carried out. Incoherent hologram of a 3D object is generated by using the hologram input system of modified triangular interferometer. Then this complex hologram is reconstructed by using the hologram output system of modified Mach-Zehnder interferometer in which two LCD spatial light modulators and a waveplate are inserted. From the experiment with two point sources having a depth difference of 100 mm each other, it is revealed that each point source can be independently reconstructed at its own focal position from the complex hologram, while both of the bias and conjugate image are simultaneously eliminated at the same time. And in the experiment with the real 3D object of two dices having a depth difference of 30 mm each other, it is also conformed that the bias and conjugate image can be effectively eliminated from the hologram pattern and each 3D dice can be also successfully reconstructed at its own focal position from the complex hologram. These experiment results finally suggest a possibility of implementing a new incoherent holographic 3D imaging and display system using the modified triangular and Mach-Zehender interferometers.