• 한국정보통신학회논문지
• /
• 제11권1호
• /
• pp.1-6
• /
• 2007

본 논문에서는 AWGN 채널 환경에서 likelihood 함수를 사용하여 변조 신호를 구분하는 새로운 구조의 변조 신호 구분 방식을 제안한다. 제안된 방식은 각 변조 신호가 전송된다는 가정하에 likelihood 함수를 사용하지만 기존의 maximum likelihood 방식보다 더 양호한 특성을 갖는다. 기존의 maximum likelihood 방식은 구조의 복잡성과 위상 및 주파수 옵?V을 갖는 채널에서 변조 신호 구분 성능이 열화되는 특성을 갖는다. 제안된 방식은 기존 방식의 impaired 채널 환경에서의 열화 성능을 보완하는 간단한 구조의 blind 변조 구분 성능을 제공한다. 제안된 방식은 위상 및 주파수 옵?V을 갖는 채널 환경에서 기존의 maximum likelihood 방식과 성능을 모의 실험하여 비교 분석 되었다. 제안된 방식의 변조 신호 구분의 정확성은 실험 결과에서 기존 방식보다 더 양호한 성능을 보였으며, 단순한 계산 방식으로 보다 더 간단한 구조를 갖는다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.139-141
• /
• 2000

High voltage direct current(HVDC) transmission system uses the phase controlled rectifier triggered by means of IPC(individual phase control) or EPC(equidistant pulse control). Most HVDC system has adopted EPC method that can solve the harmonic instability problem of IPC method in weak power system. But EPC has inherent indirect synchronizing problem requiring the closed loop control. This paper presents the new gate pulse generating method for 12-pulse HVDC converter, which combines IPC with EPC. Simulation and test results are presented. The basic concept is that it generates the gating pulse for 12-pulse converter by synthesizing the internal phase reference using the frequency and phase information of a sin91e phase voltage. To ensure the reliability of the external phase input, Potential transformer that detects the phase voltage has redundancy. Using fault detecting algorithm the healthy input is always guaranteed. And the frequency compensation function was reinforced.

• 전기의세계
• /
• 제18권5호
• /
• pp.20-25
• /
• 1969

The development of the frequency convertors using semiconductors devices makes it possible to control the speed of A.C. motors easily. It is now economically feasible to provide them with power at adjustable frequency using silicon-controlled rectifier (or thyristor) inverters. In such a case, in order to operate an induction motor efficiently over a wide speed range, it must be supplied from a variable frequency source of which frequency is adjustable over the speed range of the motor. It is desired to observe the changes in characteristics as primary current, torque-speed of induction motor etc. at any optional frequency. Although the characteristics can be obtained by means of the conventional methods, they require very complicated precedures of calculations. The Current Diagram Method in this paper suggests a new approach to simpler calculations of the characteristics, using the motor constants at reference frequency. The conclusions of this study are summarized as follows: 1) The equations of stator current at adjusted frequency were derived to construct graphical chart and the current circle required for the Current Diagram Method. 2) The radius, center of the current circle and the vector locus, the basis for calculating the characteristics, at any desired frequency could be easily determined with the aid of both the derived graphical chart and current circle at reference frequency. 3) The method was shown to be applicable to the various types of 3-phase induction motors and also dealt with its application to the split-phase, condenser motors.

• 한국ITS학회 논문지
• /
• 제6권2호
• /
• pp.126-137
• /
• 2007

본 논문에서는 새로운 ROM 압축방식을 사용한 저전력 직접 디지털 주파수 합성기를 제안하고 낮은 클럭에서 동작하는 위상 누적기를 병렬로 연결하여 높은 주파수를 생성하는 위상-사인 변환기를 설계한다. ROM크기를 줄이기 위해 사인파를 양자화 할 때 일련의 차동 양자화 기술을 응용, 변형하여 양자화 ROM(Quantized ROM : Q-ROM과 차동 ROM(Differential ROM : D-ROM)을 사용하는 QD-ROM 압축방식을 제안한다. 이를 사용함으로써 67.5%의 ROM 사이즈를 감소시킬 수 있고 ROM의 크기를 줄여 전력 소모를 줄일 수 있다.

• Journal of Power Electronics
• /
• 제13권2호
• /
• pp.322-328
• /
• 2013

This paper presents a modified Current Source Parallel Resonant Push-pull Inverter (CSPRPI) for single phase induction heating applications. One of the most important problems associated with current source parallel resonant inverters is achieving ZVS in transient intervals. This paper shows that a CSPRPI with the integral cycle control method has dynamic ZVS. According to this method, it is the Phase Locked Loop (PLL) circuit that tracks the switching frequency. The advantages of this technique are a higher efficiency, a smaller package size and a low EMI in comparison with similar topologies. Additionally, the proposed modification results in a low THD of the ac-line current. It has been measured as less than %2. To show the validity of the proposed method, a laboratory prototype is implemented with an operating frequency of 80 kHz and an output power of 400 W. The experimental results confirm the validity of the proposed single phase induction heating system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.132-137
• /
• 2000

A complete theoretical treatment of the photothermal displacement technique has been performed for thermal diffusivity measurement in solid materials. The influence of parameters - radius and modulation frequency of pump beam and thickness of material - on the phase lag was studied. The phase decreases up to a certain position, then starts to increase and does have an asymptotic value. The position, where phase has the minimum value, is a function of thermal diffusion length thickness of sample, and radius of pump beam. A new method based on minimum phase lag is described to determine the thermal diffusivity of solid material.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.94-100
• /
• 2008

This paper presents a new control method of single-phase active power filter (APF) for the compensation of harmonic current components in nonlinear loads. To facilitate the possibility of complex calculation for harmonic current detection of the single phase, a single-phase system that has two phases was constructed by including an imaginary second-phase giving time delay to the load current. The imaginary phase, which lagged the load current T/4 (Here T is the fundamental cycle) is used in the conventional method. But in this proposed method, the new signal as the second phase is delayed by the filter. Because this control method is applied to a single-phase system, an instantaneous calculation was developed by using the rotating reference frames synchronized to source-frequency rather than by applying instantaneous reactive power theory that uses the conventional fixed reference frames. The control scheme of single-phase APF for the current source with R-L loads is applied to a laboratory prototype to verify the proposed control method.

• 전력전자학회논문지
• /
• 제4권1호
• /
• pp.82-90
• /
• 1999

본 논문은 단일 스위치 3상 ZCS 강압형 정류기의 펄스주파수 제어기법을 다루고 있다. 제안하는 펄스주파수 제어방법은 거의 정현적인 입력전류를 흐르게 하여 3상 강압형 정류기의 성능을 보여준다. 제안하는 제어구조의 유용성을 검증해 주는 시뮬레이션과 실험 결과는 단일 스위치 3상 ZCS 강압형 정류기의 고역율, 입력전류의 낮은 THD, 부하 변동에 대한 전압의 응답특성들이 뛰어남을 보여준다.

• The Journal of the Acoustical Society of Korea
• /
• 제15권1E호
• /
• pp.84-88
• /
• 1996

In this paper, we propose a novel adaptive digital filter for tonal noise cancellation, with a frequency tracking capability. The proposed algorithm not only estimates the magnitude and phase of the tonal disturbance but also tracks its frequency, which changes in quasi-static manner. The algorithm uses the steepest descent method and the instantaneous frequency approach for the phase/magnitude estimation and frequency tracking, respectively. A number of computer simulations have been carried out in order to demonstrate the feasibility of the proposed ANC algorithm under various conditions.

• 한국정보통신학회논문지
• /
• 제9권3호
• /
• pp.638-646
• /
• 2005

최근 무선통신시스템에서 직접변환 트랜시버 또는 IF 샘플링 SDR 기반 수신기가 일반적인 트랜시버 구조에 상응하여 설계되어지고 있다. 일반적인 AFC/APC 보상 회로가 기저 대역에서 RF 입력 신호와 국부발진 신호의 주파수 및 위상 오차를 보정할지라도 직접변환 수신 구조에서는 주요한 열화요소로 작용한다. 일반적인 보상 회로의 제한적인 동작 영역과 기저 대역에서의 1/Q 채널의 불평형을 용이하게 보상할 수 있도록 RF 입력 신호단에서 주파수 및 위상 오차를 보정하는 방법을 본 논문에서 제안한다. RF 입력단에서 고정된 주파수 및 위상 오차 이외에 변화하는 주파수 및 위상 오차를 제안된 early-late 보상기에 의해 효과적으로 보상할 수 있다. RF 입력단에서의 주파수 및 위상 오차의 보정으로 직접변환 수신기의 기저 대역에서의 기존 주파수 및 위상 오차 보정 회로는 간단히 설계할 수 있으며 미세한 오차 보정 구조로 용이하게 이용할 수 있다.