• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.5
• /
• pp.52-58
• /
• 2001

In this paper, the low voltage linear tunable transconductors using the series composite transistor are presented. Due to the series composite transistor operating in the saturation region and the triode region, the proposed circuits have wide input range at low supply voltage. The designed transconductors have been simulated by HSPICE using $0.25{\mu}m$ n-welll CMOS process. Simulation results show that the cutoff frequency is 309M Hz and the THD of less than 1.1% can be obtained for the differential input signal of up to l.5VP-P with the input signal frequency of l0MHz.

• Information and Communications Magazine
• /
• v.13 no.11
• /
• pp.181-191
• /
• 1996

In this paper we discuss narrow-band interference rejection schemes for spectrum overlay communications where direct sequence spread spectrum (DS/SS) communication system and narrow-band communication systems share the same frequency band. In this case, it is essential to reject the narrow-band signals to guarantee the performance of DS/SS system, while it is not necessarily required to reject the DS/SS signal to recover the narrow-band signal. We discuss several schemes such as time domain processing, frequency domain processing and exploiting the device characteristics to reduce the effect of narrow-band signal on DS/SS communication systems. Furthermore, we suggest a structure of tunable notch filter using gyrator that can easily be customized to ASIC.

• Journal of Mechanical Science and Technology
• /
• v.19 no.7
• /
• pp.1449-1459
• /
• 2005

This paper shows the results of local flow speed measurement using tunable AC thermal anemometry, which is suitable for the accurate measurement of wide range flow speed. The measurement accuracy is verified through the comparison between the measurement data and the analytic solution of the sensor temperature oscillation in stationary fluid. The relation between the phase lag and the flow speed is experimentally investigated at various conditions. The measurement sensitivity for low flow speed improves in a low frequency region and that for high flow speed improves in a high frequency region. Also, the sensitivity increases with decreasing thermal conductivity of the surrounding fluid. The local flow speed could be measured as low as 1.5 mm/s and the highest measurement resolution was 0.05 mm/s in the range of 4.5 $\~$5.0 mm/s at 1 Hz in this experiment.

• Journal of Korea Multimedia Society
• /
• v.6 no.2
• /
• pp.319-324
• /
• 2003

In this paper, a new wideband tunable analog element for multimedia system is proposed. The proposed active element is composed of the complementary cascode circuit which can extend transconductance of an element. Therefore, the unity gain frequency which is determined transconductance is increased than that of the conventional element. And then these results are verified by the 0.22$\mu\textrm{m}$ CMOS n-well parameter simulation. As a result, the gam and the unity gam frequency are 42dB and 200MHz on 2V supply voltage. And power dissipation of the designed element is 0.32mW.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.714-720
• /
• 2009

In this paper, design and the implementation method of a band-tunable ultra-wideband planar doubler are described Microstrip-to-CPS(balun) transition and Microstrip-to-CPW transition are respectively used for input/output matching circuits for the doubler. The Input balun structure allows to apply diode bias, and the doubler output frequency is tunable by changing the diode bias voltage. With the bias voltage of -0.6 V, the measured operating frequency band of the implemented doubler is $10{\sim}20$ GHz, with the bias voltage of $-0.2{\sim}-0.4$ V, the operating frequency band is $10{\sim}30$ GHz, and with 0 V bias, the operating frequency band is $20{\sim}30$ GHz. The doubler provides conversion loss of less than 15 dB and fundamental frequency suppression of 30 dB.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.8
• /
• pp.53-61
• /
• 1998

Dynamic characteristics of widely tunable SGDBR/SSGDBR laser diodes integrated with an electroabsorption modulator is inestigated using an improved large-signal timef-domain model. First, wide tunning properties of a SGDBR laser diode and a SSGDBR laser diode are analyzed respectively and compared with each other. And, intensity-modulation characteristics of a SGDBR laser diode incorprating an electroabsorption modulator are investigated. It is shown that an external modulation has the lower frequency chirp by 1/20 for almost same extinction ratios than a direct modulation, and a nearly transform-limited pulse train can be generated using the optical gating of an electroabsorption modulator.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.453-458
• /
• 2002

This paper deals with the vibration reduction of hull mount system of ship structures brought by ER smart structures. The hull mount is used to isolate the vibration of equipment from the host structures. Utilizing the tunable characteristics of ER fluids, ER inserts are made in the hull mount structure. Different types of ER inserts are proposed and the vibration characteristics are investigated. A hull mount structure is made and the influence of ER inserts are experimentally studied. An extensive modal test is empirically conducted to identify natural frequencies and mode shapes according to the applied electric field and the types of ER insert. The frequency tunable characteristics of ER inserts can be applied to many mounting structures for vibration reduction.

• Journal of Communications and Networks
• /
• v.11 no.1
• /
• pp.1-10
• /
• 2009

In this paper, we propose a chip-level detection and a spectral-slice scheme for the tunable-transmitter/fixed-receiver (TTFR)-based asynchronous spectral phase-encoded optical codedivision multiple-access (CDMA) system combined with timeencoding. The chip-level detection can enhance the tolerance of multiple access interference (MAI) because the channel collision does not occur as long as there is at least one weighted position without MAI. Moreover, the spectral-slice scheme can reduce the interference probability because the MAI with the different frequency has no adverse effects on the channel collision rate. As a result, these techniques mitigate channel collisions. We analyze the channel collision rate theoretically, and show that the proposed system can achieve a lower channel collision rate in comparison to both conventional systems with and without the time-encoding method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.11
• /
• pp.1096-1103
• /
• 2010

This paper proposes CDC (Continuous Damping Control) algorithm and verifies in multi-body dynamic vehicle. In order to distinguish a road profile on driving, waviness calculated by the filtered vertical-accelerations of sprung and unsprung masses is introduced. Sky-hook control is used at a low waviness road and constant damping level control is used at a high waviness road, where the hard damping level is determined by waviness, roll rate, acceleration, and deceleration. The damping levels of ride, anti-roll, anti-squat, and anti-dive modules are calculated by tuning parameters which is dependent upon vehicle velocity. Therefore this high tunable algorithm is useful to improve the ride and handling performance under various driving conditions. In the simulations, tire and dampers are modelled by SWIFT (Short Wavelength Intermediate Frequency Tire) model and 1st order delay model, and results are compared with conventional damper's.

• Journal of the Optical Society of Korea
• /
• v.11 no.1
• /
• pp.1-5
• /
• 2007

We investigate the efficiency of an optical intensity modulator based on an electrically tunable $LiNbO_3$ reflection grating. Assuming a grating coupling coefficient and the waveguide propagation loss, waveguide length is varied to find its effect on the modulator slope efficiency and the device capacitance. With the low propagation loss of the $LiNbO_3$ waveguide, a very efficient optical intensity modulator can be achieved for a low frequency (${\sim}1GHz$) as long as the requirement for the grating coupling coefficient is satisfied.