• Journal of Plant Biotechnology
• /
• v.29 no.2
• /
• pp.135-138
• /
• 2002

Cotyledonary explants from immature zygotic embryos of each 85 recombinant inbred lines (RILs) were cultured on medium containing MS salts, B5 vitamins, 40 mg$^{-1}$ 2,4-dichlorophenoxyacetic acid and 30 g$^{-1}$ sucrose. Frequency of somatic embryo formation on cotyledonary explants showed in thirty-six lines(＜10%), in thirty-seven lines (11~49%), in nine lines (50~89%), and in three lines(>90%), respectively, The highest frequency (up to 90%) and number (6.36 per cotyledon) of somatic embryos were obtained from lines of KM1010, KM1032 and KM1064. Primary somatic embryos produced from three lines produced numerous secondary somatic embryos on the surfaces, which were subcultured for over one year. Upon transfer to maturation and conversion medium (Komatsuda, 1992), somatic embryos converted to plantlets at a frequency of approximately 25%.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.2
• /
• pp.138-149
• /
• 2000

Various modeling techniques for ultrasonic wave propagation and scattering problems in finite solid media are presented. Elastodynamic boundary value problems in inhomogeneous multi-layered plate-like structures are set up for modal analysis of guided wave propagation and numerically solved to obtain dispersion curves which show propagation characteristics of guided waves. As a powerful modeling tool to overcome such numerical difficulties in wave scattering problems as the geometrical complexity and mode conversion, the Boundary Element Method(BEM) is introduced and is combined with the normal mode expansion technique to develop the hybrid BEM, an efficient technique for modeling multi mode conversion of guided wave scattering problems. Time dependent wave forms are obtained through the inverse Fourier transformation of the numerical solutions in the frequency domain. 3D BEM program development is underway to model more practical ultrasonic wave signals. Some encouraging numerical results have recently been obtained in comparison with the analytical solutions for wave propagation in a bar subjected to time harmonic longitudinal excitation. It is expected that the presented modeling techniques for elastic wave propagation and scattering can be applied to establish quantitative nondestructive evaluation techniques in various ways.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.9
• /
• pp.19-27
• /
• 1998

The Transmitter part of single RF transceiver chip for an extended GSM handset application was circuit-designed, fabricated adn evaluated. The RF-IC Chip was processed by 0.8${\mu}m$ Si BiCMOS, 80 pin TQFP of $10 {\times} 10mm$ size, 3.3V operated RF-IC reveals, in general, quite reasonable integrity and RF performances. This paper describes development resuts of RF transmitter section, which includes IF/RF up-conversion mixer, IF/RF polyphase and pre-amplifier. The test results show that RF transmitter section is well operated within frequency range of 880~915MHz, which is defined on the extended GSM(E-GSM) specification. The transmitter section also reveals moderate power consumption of 71mA and total output power of 8.2dBm.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.9
• /
• pp.1312-1317
• /
• 2008

The objective of the present trial was to determine the effect of a thermostable probiotic containing Bacillus licheniformis and B. subtilis on health and production parameters of fattening rabbits from weaning until slaughter. In a rabbitry with average post-weaning mortality of 5-9%, 1,680 rabbits were supplied with: a) a basic feed, or b) the same basic feed supplemented with probiotic from the 4th day postweaning (41st day of age) up to 88th day of age. Clinical signs, microbiological status and growth performance were recorded for two distinct fattening periods, growing and finishing. A significant decrease in mortality of probiotic-treated rabbits when compared to the controls was observed during the growing and entire fattening periods. Within these periods, E. coli and C. perfringens - but not P. multocida - were isolated at a lower frequency from probiotic-treated rabbits (p<0.05). Compared to the control animals, probiotic-treated rabbits were 54 g and 123 g heavier at the end of the growing and finishing phases, respectively, and had significantly higher average daily gain and better feed conversion ratio (p<0.05).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.315-322
• /
• 1998

Power conversion system must increase switching frequency in order to achieve small size, light weight and low noise. However, the switches of converter are subject to high switching power losses and switching stresses. As a result, the power system has a lower efficiency. In this paper, the authors propose an AC-DC boost converter of high efficiency by partial resonant switching mode. The switching devices in the proposed circuit are operated with soft switching and the control technique of those is simplified for switch to drive in constant duty cycle. The partial resonant circuit makes use of a inductor using step up and a condenser of loss-less snubber. Besides, by regenerating energy, that is charged in a loss less snubber condenser of a snubber adopted to a common circuit, toward an input source part, this circuit can get increased efficiency. as merit. The result is that the switching loss is very low, the efficiency and power factor of system is high. The proposed converter is deemed the most suitable for high power applications where the power switching devices are used.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.4
• /
• pp.613-618
• /
• 2015

This paper proposed a low power CMOS Flash-SAR A/D converter which consists of a Flash A/D converter for 2 most significant bits and a SAR A/D converter with capacitor D/A converter for 8 least significant bits. Employment of a Flash A/D converter allows the proposed circuit to enhance the conversion speed. The SAR A/D converter with capacitor D/A converter provides a low power dissipation. The proposed A/D converter consumes $136{\mu}W$ with a power supply of 1V under a $0.18{\mu}m$ CMOS process and achieves 9.16 effective number of bits for sampling frequency up to 2MHz. Therefore it results in 120fJ/step of Figure of Merit (FoM).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.963-969
• /
• 2008

This paper presents 6bit 100MHz Interpolation Flash Analog-to-Digital Converter, which can be applied to the Receiver of Wireless Tele-communication System. The 6bit 100MHz Flash Analog-to-Digital Converter simplifies and integrates S-R latch which multiplies as the resolution increases. Whereas the conventional NAND based S-R latch needed eight MOS transistors, this Converter was designed with only six, which makes the Dynamic Power Dissipation of the A/D Converter reduced up to 12.5%. The designed A/D Converter went through $0.18{\mu}m$ CMOS n-well 1-poly 6-metal process to be a final product, and the final product has shown 282mW of power dissipation with 1.8V of Supply Voltage, 100MHz of conversion rate. And 35.027dBc, 31.253dB SFDR and 4.8bits, 4.2bits ENOB with 12.5MHz, 50MHz of each input frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.273-278
• /
• 2011

This paper has proposed a dual-band transmitter RF Front-end for IMT-Advanced systems which has been implemented in a 0.13-${\mu}m$ CMOS technology. The proposed dual-band transmitter RF Front-End covers 2300~2700 MHz, 3300~3800 MHz frequency ranges which support 802.11, Mobile WiMAX, and IMT-Advanced system. The proposed dual-band transmitter RF Front-End consumes 45 mA from a 1.2 V supply voltage. The performances of the transmitter RF Front-End are verified through post-layout simulations. The simulation results show a +0 dBm output power at 2 GHz band, and +1.3 dBm output power at 3 GHz band.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.325-334
• /
• 2018

Lactose is a reducing disaccharide consisting of two different monosaccharides such as galactose and glucose. The hydrogenation of lactose to lactitol is a formidable challenge because it is a complex process and several side products are formed. In this work, we synthesized Ru-Ni bimetallic nanohybrids as efficient catalysts for selective lactose hydrogenation to give selective lactitol. Ru-Ni bimetallic nanohybrids with $Ru-NiO_x$ (x = 1, 5, and 10 wt%) are prepared by impregnating Ru and Ni salts precursors with $TiO_2$ used as support material. Ru-Ni bimetallic nanohybrids (represented as $5Ru-5NiO/TiO_2$) catalyst is found to exhibit the remarkably high selectivity of lactitol (99.4%) and turnover frequency i.e. ($374h^{-1}$). In contrast, monometallic $Ru/TiO_2$ catalyst shows poor performance with ($TOF=251h^{-1}$). The detailed characterizations confirmed a strong interaction between Ru and NiO species, demonstrating a synergistic effect on the improvement on lactitol selectivity. The impregnation-reduction method for the preparation of bimetallic $Ru-NiO/TiO_2$ catalyst promoted Ru nanoparticles dispersed on NiO and intensified the interaction between Ru and NiO species. $Ru-NiO/TiO_2$ efficiently catalyzed the hydrogenation of lactose to lactitol with high yield/selectivity at almost complete conversion of lactose at $120^{\circ}C$ and 55 bar of hydrogen ($H_2$) pressure. Moreover, $Ru-NiO/TiO_2$ catalyst could also be easily recovered and reused up to four runs without notable change in original activity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.4
• /
• pp.530-538
• /
• 2016

Two experiments were conducted to determine the nutrient composition, in vitro ruminal ammonia concentrations and pH of wet distillers grains (WDG, produced from tapioca 70% and rice 30%) and to evaluate dietary effects of fermented total mixed ration (TMR) using WDG on the performance, blood metabolites and carcass characteristics of Hanwoo steers from mid fattening to slaughter. In Exp. I, average dry matter (DM), crude protein, ether extract, crude fiber, ash, neutral detergent fiber, acid detergent fiber, and nitrogen free extract of seven WDG samples from an ethanol plant with different sampling dates were 19.9%, 24.8%, 3.8%, 21.8%, 8.87%, 60.3%, 34.5%, and 40.7% (DM basis), respectively. For in vitro ammonia concentrations and pH, each sample was assigned to 7 incubation times (0, 4, 8, 12, 24, 48, and 72 h). Linear increase was observed between 12 and 48 h for ammonia concentrations, but final ammonia concentrations (72 h) were not significantly different among WDG samples and fermentation patterns of WDG samples showed similar tendency. In vitro pH varied among treatments from 0 to 24 h, but were not different statistically after 48 h. In Exp. II, 45 Hanwoo steers of 23 months ($641{\pm}123kg$) from mid fattening period to slaughter (248 days) were randomly divided into three groups of 15 pens each (five repetitions/each treatment) and assigned to one of three dietary treatments; i) Control (TMR), ii) WDG 15 (TMR containing 15% of WDG, as fed basis) and iii) WDG 28 (TMR containing 28% of WDG, as fed basis). The body weight (BW), ADG, and feed conversion ratio (FCR) of control and WDG 15 and 28 during 248 days were 760.8, 740.1, and 765.5 kg, and 0.50, 0.50, and 0.52 kg/d, and 18.6, 17.6, and 17.1, respectively. The dry matter intake (DMI) (kg/d) of control (9.11) was higher (p<0.05) than WDG treatments (WDG 15%, 8.57; 28%, 8.70). Nevertheless, DMI did not affect BW, ADG, and FCR of Hanwoo finishing steers. Blood metabolites were in normal ranges and were not different among treatments except the albumin concentration. In carcass characteristics, WDG 15 (30%) showed higher frequency of A-carcass yield grade than WDG 28 (15%) and control (7%), and WDG 28 (61%) showed higher frequency of $1^{{+}{+}}$ and $1^+$-carcass quality grade than WDG 15 (40%) and control (60%). In conclusion, using WDG up to 28% in TMR did not show any negative effect on the performance and blood metabolites, and improved carcass quality of Hanwoo steers. Therefore, WDG can be a useful feed ingredient for Hanwoo steers in mid-fattening period to slaughter.