• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2232-2240
• /
• 2017

IMO has made AIS and VHF mandatory for international sailing vessels through SOLAS, and korea if mandating specific vessels through the law for safety of vessels and the ship installation technology standards. However, due to various communication equipments and complicated usage method, malfunction occurs, and the response delay to the actual structure signal often causes human accidents. So recently, as a part of GMDSS modernization, maritime communication devices are attempting to interwork and integrate different types of marine communication system in order to construct a next generation maritime communication system. In this paper, we describe a technique to implement the DSC function by interlocking and integrating the AIS device and VHF. We will present the basis for achieving domestic technical standards and standardization through the linking algorithm of the data that can extract the ship information from AIS and utilize it the DSC function of VHF.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.6
• /
• pp.403-410
• /
• 2008

This paper suggests a standstill estimator to accurately identify induction motor (IM) parameters necessary for the vector control. A mathematical model that faithfully represents the general skin effect is introduced. Then, two exciting signals with a different frequency are sequentially injected to track the parameters based on the skin effect of the rotor bar. Little knowledge of the unknown motor allows the proposed methodology to employ a closed-loop control of an injected current, rather than open-loop voltage injection approaches. Subsequently, this control scheme proactively prevents electrical accidents resulting from an inadequate open-loop voltage injection. We develop a specialized offline commissioning test to compensate the phase delay resulting from the drive, which significantly affects the precision of the IM parameters. The effectiveness of the identification technique is validated by means of experiments performed on the three different IMs.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.6
• /
• pp.229-238
• /
• 2018

The rapid response of disaster accidents can be archived through the organical involvement of various disaster and safety control agencies. To define the terminology of disaster safety is essential for communication between disaster safety agencies and well as announcement for the public. Also, to efficiently construct a word dictionary of disaster safety terminology, it's necessary to define the priority of the terms. In order to establish direction of word dictionary construction, this paper compares the usage of disaster safety terminology by media: word dictionary, new media, and social media, respectively. Based on the terminology resources collected from each media, we visualized the distribution of terminology according to frequency weights and analyzed co-occurrence patterns. We also classified the types of terminology into four categories and proposed the priority in the construction of disaster safety word dictionary.

• Journal of agricultural medicine and community health
• /
• v.23 no.1
• /
• pp.51-64
• /
• 1998

This study was carried out during 3 years from March 1992 to March 1995, 140 healthy people and 140 C.V.A patients were investigated, at an oriental clinic in Taejon. The data collected was analysed using a SAS. The results are as follows. 1. The Relationships between patients who have undergone one or more abortion procedures and C.V.A occurrence. A statistical significant difference was recorded between the control group and the outpatients group of P<0.05 2. Number of years after initial C.V.A diagnosis before C.V.A symptom onset. within 1 years 52% (2-3 years, 3-4 years, 4-5 years, 5 years and over) 3. Additional diseases occurring after initial stroke 1 disease 50.7% (2, 3, 4, 5 or more) 4. Alcohol Consumption "A statistical significant difference was recorded between the control group and the outpatients group of" P<0.01 5. Previous Treatment Experience for stoke outpatients Oriental Hospital, clinic 64.3% (General Hospital, clinic, a public health center drug store, home remedies, etc) 6. Exercise Frequency Outpatients Regular 28.6%, Irregular 71.4% Control sample Regular 27%, Irregular 72.9% 7. Degree of Appetite "A statistical significant difference was recorded between the control group and the outpatients group of" P<0.01 8. People who include fish in their diet "A statistical difference was recorded between the control group and the outpatients group of" P<0.01.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.3
• /
• pp.215-221
• /
• 2018

The structural design of offshore installations against explosions has been required to protect vital areas (e.g. control room, worker's area etc.) and minimize the damage from explosion accidents. Because the explosion accident will not only result in significant casualties and economic losses, but also cause serious pollution and damage to surrounding environment and coastal marine ecosystems. Over the past two decades, an incredible efforts was made to develop reliable methods to reduce and manage the explosion risk. Among the methods Quantitative Risk Assessment and Management (QRA&M) is the one of cutting-edge technologies. The explosion risk can be quantitatively assessed by the product of explosion frequency based on probability calculation and consequence analyzed using computer simulations, namely Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA). However to obtain reliable consequence analysis results by CFD and FEA, uncertainties associate with modeling and simulation are needed to be identified and validated by comparison with experimental data. Therefore, large-scaled explosion test procedure is developed in this study. And developed test procedure can be helpful to obtain precious test data for the validation of consequence analysis using computer simulations, and subsequently allow better assessment and management of explosion risks.

• Journal of Information Technology Services
• /
• v.15 no.4
• /
• pp.97-109
• /
• 2016

The rapid deployment of millions of mobile sensors and smart devices has resulted in high demand for opportunistic encounter-based networking. For the cooperative video surveillance of dashboard cameras in nearby vehicles, a fast and energy-efficient asynchronous neighbor discovery protocol is indispensable because a dashboard camera is an energy-hungry device after the vehicle's engine has turned off. In the existing asynchronous neighbor discovery protocols, all nodes always try to discover all neighbors. However, a dashboard camera needs to discover nearby dashboard cameras when an event is detected. In this paper, we propose a fast and energy-efficient asynchronous neighbor discovery protocol, which enables nodes : 1) to have different roles in neighbor discovery, 2) to discover neighbors within a search range, and 3) to report promptly the exact discovery result. The proposed protocol has two modes: periodic wake-up mode and active discovery mode. A node begins with the periodic wake-up mode to be discovered by other nodes, switches to the active discovery mode on receiving a neighbor discovery request, and returns to the periodic wake-up mode when the active discovery mode finishes. In the periodic wake-up mode, a node wakes up at multiples of number ${\alpha}$, where ${\alpha}$ is determined by the node's remaining battery power. In the active discovery mode, a node wakes up for consecutive ${\gamma}$ slots. Then, the node operating in the active discovery mode can discover all neighbors waking up at multiples of ${\beta}$ for ${\beta}{\leq}{\gamma}$ within ${\gamma}$ time slots. Since the proposed protocol assigns one half of the duty cycle to each mode, it consumes equal to or less energy than the existing protocols. A performance comparison shows that the proposed protocol outperforms the existing protocols in terms of discovery latency and energy consumption, where the frequency of neighbor discovery requests by car accidents is not constantly high.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.151-160
• /
• 2022

Owing to the recent increase in the frequency of explosion accidents, blast resistive design has garnered attention to reduce the damage of important structural elements. However, domestic research on the blast resistive structures is still insufficient, and domestic design guideline against blast loads are not documented yet. In this study, a numerical study on the RC blast resistive walls, where the test variable was the presence of FRP sheet, was performed using LS-DYNA program. Based on the numerical results, displacement-time hysteretic curve, pressure-impulse diagram, and fragility curve of the test specimens were derived. It was shown that the FRP sheet strengthening method is efficient to improve the blast resistive performance of the RC wall. Also, the strengthening effect of FRP sheet on the RC wall was stronger when the magnitude of the blast load was greater.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.1-11
• /
• 2023

The size of the OLED material market is expected to grow from $1.1 billion in 2019 to $2.3 billion in 2023, with an average annual sustainable growth of more than 19%. Among the facilities mainly used by OLED material manufacturers, accidents such as fire, explosion, and leakage frequently occur when using filtration equipment, so it is necessary to improve the risk when using filtration equipment. In this study, it was divided into four main processes, namely, assembly and disassembly process, filtration process, wet cake recovery process, and washing process in order to derive the risks associated with the use of filtration equipment. Hazard factors were derived by conducting accident case investigations, preliminary interviews, and surveys. For the analysis of questionnaire results, statistical analysis such as frequency analysis and Pearson chi-square test analysis was performed using SPSS 21, and risk improvement measures were suggested using the analyzed results. It is expected that this study will serve as a basis for dealing with safety and risk factors that may occur as the size of the OLED market expands.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.4
• /
• pp.329-336
• /
• 2008

The facilities with new technologies in the recent power plants become larger and need a lot of high cost for maintenance due to stop operations and accidents from the operating machines. Therefore, it claims new systems to monitor the operating status and predict the faults of the machines. This research classifies the normal/abnormal status of the machines into 5 levels which are normal-level/abnormal-level/care-level/dangerous-level/fault and develops the new system that predicts faults without stop operation in power plants. We propose the regional segmentation technique in the frequency domain from the data of the operating machines and generate the Peak-codes similar to the Bar-codes, The high efficient and economic operations of the power plants will be achieved by carrying out the pre-maintenance at the care level of 5 levels in the plants. In order to be utilized easily at power plants, we developed the algorithm appling to a notebook computer from signal acquisition to the discrimination.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.5
• /
• pp.494-498
• /
• 2004

Fire accidents often happen in large buildings because large buildings are equipped with heavy electrical wiring and piping. When fire is to be occurred in those buildings, it is very dangerous to People and building structures. Therefore, multi-point wireless temperature sensors for large buildings are necessary in order to detect fire in the early time and thus to minimize the loss. A wireless device was composed of the transmitter and receiver. The specification of this device was as follows: 915MHz of transmitted frequency, 4 channels, 9600bps of the transmitted speed, and 10mW of the transmitted power. We confirmed through experiment that the temperature was well sensed and fire location was determined by the 4 channel sensors of the developed sensor system.