• International Journal of Industrial Entomology and Biomaterials
• /
• 제11권1호
• /
• pp.75-78
• /
• 2005

Inheritance of cocoon and shell weight characters in silkworm crosses between sex-limited at larva stage lines, including three (NIG$_{1}$ $\times$ TV$_{3/2}$ ,NIG$_{1}$ $\times$ TBV$_{2/24}$ and NIG$_{1}$ $\times$ B$_{2/6}$ ) from Japanese type and three (NIG$_{2}$ $\times$ B$_{2/6}$ ,TV$_{3/2}$ $\times$ NIG$_{1}$ and NIG$_{2}$ $\times$ TBV$_{2/24}$ ) from Chinese type was studied at Regional Centre for Scientific­Applied Service - Vratza during the period of 2000 ­2002. Inheritance of tested characters in F I was deter­mined through genetic parameters, additiveness (a), dominance (d) and their ratio (d/a). Degree and frequency of transgressions in F$_{2}$ were calculated also. Over dominance (d/a(>) 1) with bigger contribution of the parent with higher value was determined at inheritance tested characters. Transgressions obtained at cocoon and shell weight characters were positive and varied in wide limits. The productivity of parent's lines had defined the variability of genetic parameters for degree and frequency of transgressions. Combination of positive transgressions at cocoon and shell weight characters in F2 hybrid populations from sex-limited at larva stage allow us to select individuals with high productive potential for further use in selection programs.

• 대한전자공학회논문지SD
• /
• 제48권7호
• /
• pp.82-90
• /
• 2011

본 논문은 실험적 고찰을 통해 고주파 전송선 회로의 시그널 인테그러티를 정확하게 검증하는 방법을 제시하였다. 패키지 공정을 이용하여 제조한 배선의 공정편차, 표면 거칠기 효과, 표피 효과, 시뮬레이션을 위한 경계조건 등은 시뮬레이션의 정확도에 상당한 영향을 끼친다. 이러한 영향을 장해석기(HFSS)에 적용할 수 있는 변수로 변환하여 보다 정확하게 시그널 인테그러티를 검증 할 수 있도록 한다. 단일 신호선과 두 개의 전자기적으로 결합된 신호선에서의 신호 천이 특성을 측정 데이터와 제안하는 방법의 시뮬레이션 결과와 비교를 통해 제안한 방법의 정확성을 검증하였다.

• 대한전자공학회논문지
• /
• 제13권6호
• /
• pp.1-6
• /
• 1976

탄성파 지연선의 진동자에서 전단과 지연매질사이의 접착제의 두께를 고려하여 변환손실을 계산하는 방법을 제안하며, 수치계산결과 접착제의 두께가 진동자 두께의 1/100정도 이하로 하여야 하며 전극의 두께가 진동자 두께의 1/10정도 될 때 중심주파수의 이동이 생진다. 접착제의 두께를 진동자와 거의 같거나 그 이상으로 하면 주파수 대역폭에서 현상이 점점 커지게 된다. In this paper, the methode of calculating conversion loss is proposed by considering the thickness of bonding medium between electrode and delay material in the vibrator of Elastic delay lines. As the result of computations using digital computer, it is shown that the thickness of bonding medium must be less than about 1/100 of the thickness of vibrator and when the thickness of electrode is about 1110 of vibrator, the center fnequency is shifted. When the thickness of bonding medium is equal to or more than the thickness of vibrator, the 리uctuations in frequency Bandwidth become larger and larger.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1861-1863
• /
• 1996

In this paper, measurements and analyses of ELF electric fields in the vicinity of UHV overhead transmission lines and substations have been conducted. Planar-type sensors have been developed with special consideration of picking up lower frequency and spatial components without any distortion. So finally the electric field measuring system has the frequency bandwidth of 7[Hz] to 2.7[MHz] and the response sensitivity of 0.094[mV/V/m]. A brief description of design rules of the measuring system and measurement procedures is introduced. The actual survey near 154 and 345[kV] overhead transmission lines and power subststions was carried out and analyzed. It may be inferred from these results that the electric field intensity exeeds 7[kV/m] only in very few cases particularly at the substations so that the field measurements meet almost limits or guidelines that various authorized international institutes recommend.

• 전기전자학회논문지
• /
• 제10권1호
• /
• pp.87-95
• /
• 2006

이 논문은 에지 검출을 위해 다른 컬러 영역사이의 테두리선을 삽입한 효과를 분석한다. 컬러코드를 인식하는 새로운 알고리즘을 제안하지는 않는다. RFID 방식을 보상하고, 디지털 카메라의 이용률이 높아져서 컬러코드에 대한 관심이 매우 증가하고 있다. 그러나 컬러의 왜곡이 심해지면 컬러코드의 확산을 저하시키게 된다. 왜곡된 컬러의 효과를 감소시키기위해서 영역내 화소 각각의 특성보다 각 영역 전체의 화소를 통계적으로 처리하는 방법이 바람직하다. 이 처리를 위해서 영상 영역화가 필요하다. 연결되지 않은 에지를 검출하기 위해 인접 컬러 영역사이에 2 화소 크기의 테두리선을 삽입한다. 테두리선은 흰색, 검은색 경계선이 사용된다. 2 종류의 테두리선이 삽입된 영상에 대한 에지 검출이 수행되고, 그 결과가 테두리선이 삽입되지 않은 에지 검출 결과와 비교한다. 검은 테두리선을 삽입한 결과는 지퍼효과에 의해 에지 검출 능력이 저하되고, 흰 테두리선을 삽입한 결과는 삽입하지 않은 경우보다 에지 검출 능력이 향상되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.155-158
• /
• 2004

This paper presents a CPW patch antenna with $\lambda/2$ CPW transmission lines. Through the full-wave simulation and the equations of gap capacitance, the dimensions of the CPW transmission lines and resonance circuit components are extracted. Using extracted dimensions, we designed and implemented CPW patch antennas in the range of frequency of 5GHz.

• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.67-71
• /
• 2003

In this paper, frequency modulated(FM) reflectometry is proposed to measure group velocity of microwave transmission line Various microwave transmission lines such as periodically loaded conducting posts in a waveguide and nonradiative dielectric(NRD) guide are adopted to measure their group velocity The result compared with that from network analyzer shows good agreement, indicating the validity of our measurement method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.465-472
• /
• 2001

This paper describes the characteristics of wind induced noise from high-voltage overhead transmission facilities which include transmission lines. insulator strings. and aviation beacon spheres installed on the overhead ground wires. High-voltage overhead transmission lines generate an audible wind noise due to the alternate shedding of wind-induced vortices. The frequency spectrum from the insulator strings reveals its resonance peak. This resonance sound mechanism has been supposed the self-excitation phenomenon of the resonance and the velocity fluctuation. The booming noises from the aviation beacon spheres are detected and analysed.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.234-238
• /
• 2003

The LTCC bandpass filter using multilayer resonators is made of combline type and interdigital type parallel coupled-lines. The equivalent circuits of parallel coupled-lines are analysed. They are applied to make an equivalent circuit of LTCC bandpass filter using multilayer resonators. The 3-pole bandpass filter of the center frequency of 2.45GHz with 250Hz bandwidth is designed and fabricated. The simulated result of the bandpass filter are presented.

• 한국안전학회지
• /
• 제12권1호
• /
• pp.44-50
• /
• 1997

As jumpers for overhead transmission lines increase In size, it Is necessary to take into the characteristics of jumper swaying space in order to determine jumper reinforcements adequately. From the theory of a structure made of beams, formulas for the sideway swaying of overhead transmission lines due to wind are modeled. And also natural frequency of the vibrated jumper is estimated to check the system resonance. The theoretical results can be led good suggestions to improve the economy and reliability of jumper structure.