• 제목/요약/키워드: Frequency Weighting

검색결과 327건 처리시간 0.024초

IMD 저감 방식을 기반으로 하는 OFDM 통신 시스템 (OFDM Communication System Based on the IMD Reduction Method)

  • 유흥균
    • 한국전자파학회논문지
    • /
    • 제18권10호
    • /
    • pp.1172-1180
    • /
    • 2007
  • Orthogonal Frequency Division Multiplexing(OFDM) 시스템은 주파수 선택적 페이딩에 강하고 높은 대역 효율을 갖는 통신 시스템이다. OFDM 신호는 높은 PAPR로 인하여 비선형 증폭기에서 왜곡이 생긴다. 그래서 비선형 왜곡 성분인 IMD(Inter-Modulation Distortion)를 저감하는 것이 중요하다. IMD 저감 방식은 비선형 왜곡에 대하여 PAPR(Peak-To-Average Power Ratio) 저감 방식보다 BER 성능을 좋게할 수 있지만, 송신기에 FFT(Fast Fourier Transform)가 추가되어 시스템 복잡도를 증가시킨다. 본 논문에서는 IMD 저감 방식을 기반으로 하는 OFDM 통신 시스템의 BER 분석과 복잡도를 저감하기 위한 연구를 하였다. SPW(Sub-Block Phase Weighting)을 적용한 IMD 저감 방식에서 계산량 감소를 위한 새로운 방식을 제안하고 기존의 방식과 계산 복잡도를 비교한다. SPW 방식은 입력 데이터를 여러 개의 서브 블록으로 나누고 위상 회전 벡터를 곱해줌으로써 PAPR을 감소하거나 IMD를 저감한다. 제안된 방식은 BER 성능 면에서 기존 방식과 비슷하지만, PAPR처럼 시간 영역에서 IMD의 전력량을 계산하므로 시스템의 계산 복잡도와 시스템 크기를 줄일 수 있는 장점이 있다.

LMI 방법을 이용한 방사형 인공위성 제어로직 설계 및 강건성 분석 (Radial Type Satellite Attitude Controller Design using LMI Method and Robustness Analysis)

  • 이승우
    • 한국항공우주학회지
    • /
    • 제43권11호
    • /
    • pp.998-1007
    • /
    • 2015
  • 방사형 인공위성 경우, 관성곱이 커서 단일 입 출력 가정이 불가능하기 때문에 고전적 제어기 설계방법을 사용하기 어렵다. 본 논문에서 현대 제어 이론인 $H_{\infty}$ 제어기 설계이론을 사용하여 방사형 인공위성의 자세 제어기 설계를 수행하였다. 설계 알고리즘으로 보다 안정적인 LMI 방법이 사용되었고, 설계 결과에 대한 안정성과 성능에 대한 강건성 해석을 위해 ${\mu}$-해석 방법이 적용되었다. 설계 결과, 일반적인 경우와 다르게 제어기가 포함되지 않은 개루프보다 제어기가 포함된 개루프의 cross-over frequency가 더 낮게 설계되는 것이 관측되었다. 즉 상대적으로 큰 관성곱 영향 때문에 단지 weighting 함수 조정으로 위성 기동성을 증가시키는데 한계가 있는 것으로 해석된다. ${\mu}$-해석을 위해 +/-5%의 관성모멘트 변화를 가정하였다. 안정성 및 성능에 대한 강건성 해석결과, +/-7% 관성모멘트 변화까지 시스템 안정성 및 성능이 보장됨이 확인되었고, 관성곱 변화보다 주관성모멘트 변화가 안정성 및 성능 저하에 더 영향을 주는 것으로 확인되었다.

낮은 계산 복잡도를 갖는 마이크로 유전자 알고리즘 기반의 PTS 기법 (PTS Technique Based on Micro-Genetic Algorithm with Low Computational Complexity)

  • 공민한;송문규
    • 한국통신학회논문지
    • /
    • 제33권6C호
    • /
    • pp.480-486
    • /
    • 2008
  • 전송 신호의 높은 PAPR (Peak-to-Average Power Ratio)은 OFDM (Orthogonal Frequency Division Multiplexing)의 주된 문제점중의 하나이다. PTS (Partial Transmit Sequences) 기법은 OFDM 신호의 PAPR의 통계를 개선하는 기법이다. 그러나 PTS 기법에서 위상 가중치의 선택을 위한 계산 복잡도는 서브블록의 수에 따라 지수적으로 증가한다. 본 논문에서는 ${\mu}$-GA (micro-Genetic Algorithm) 기반의 위상 가중치 탐색 알고리즘을 적용한 낮은 계산 복잡도를 갖는 PTS 기법을 제안한다. 위상 가중치의 탐색은 랜덤하게 생성한 5 개체의 개체군으로부터 시작한다. 이 중에서 적합도가 가장 큰 엘리트와 토너먼트 선택 방법에 의해 나머지 4 개체를 선택하고 교배 연산을 통해 다음 세대를 구성한다. 만일 생성된 세대가 수렴한다면 엘리트를 제외한 나머지 개체를 다시 랜덤하게 생성한다. 일정 세대 이상 PAPR이 개선되지 않거나 사전에 정해진 최대 세대수까지 진행하면 탐색을 종료한다. 제안하는 PTS 기법의 성능을 평가하기 위해 PAPR의 CCDF (Complementary Cumulative Distribution Function)를 이전의 PTS 기법과 비교한다.

변형된 GA-SPW에 의한 OFDM의 새로운 PAPR 감소 기법 (A New Method of PAPR Reduction in OFDM Systems Using Modified GA-SPW)

  • 김성수;김명제
    • 한국전자파학회논문지
    • /
    • 제17권11호
    • /
    • pp.1065-1072
    • /
    • 2006
  • OFDM(Orthogonal Frequency Division Multiplexing) 시스템은 다수 부반송파들의 중첩 현상으로 인해 PAPR (Peak-to-Average Power Ratio) 문제를 가진다. 기존의 제안된 GA-SPW(Genentic-Sub-block Phase Weighting) 기법은 하나의 OFDM 심볼에서 부 블록 수를 증가시켜 PAPR 감소 성능을 향상시키고, 부 블록 수에 따라 지수적으로 증가하는 위상 탐색량을 유전자 알고리즘을 이용하여 개체군과 세대수에 고정시켜 감소시켰다. 본 논문에서는 더 적은 탐색량으로 주어진 부 블록에서 최적에 가까운 PAPR 감소 성능을 얻기 위해 기존의 GA-SPW 기법에 새로이 변형된 유전자 알고리즘을 적용한다. 제안된 기법의 성능과 계산량의 우수성을 모든 부 블록과 위상수에 따른 모든 탐색을 하는 일반적인 탐색 방법, iterative flipping그리고 기존의 GA-SPW와 시뮬레이션과 결과의 분석을 통하여 나타내었다.

The acoustic cue-weighting and the L2 production-perception link: A case of English-speaking adults' learning of Korean stops

  • Kong, Eun Jong;Kang, Soyoung;Seo, Misun
    • 말소리와 음성과학
    • /
    • 제14권3호
    • /
    • pp.1-9
    • /
    • 2022
  • The current study examined English-speaking adult learners' production and perception of L2 Korean stops (/t/ or /t'/ or /th/) to investigate whether the two modalities are linked in utilizing voice onset time (VOT) and fundamental frequency (F0) for the L2 sound distinction and how the learners' L2 proficiency mediates the relationship. Twenty-two English-speaking learners of Korean living in Seoul participated in the word-reading task of producing stop-initial words and the identification task of labelling CV stimuli synthesized to vary VOT and F0. Using logistic mixed-effects regression models, we quantified group- and individual-level weights of the VOT and F0 cues in differentiating the tense-lax, lax-aspirated, and tense-aspirated stops in Korean. The results showed that the learners as a group relied on VOT more than F0 both in production and perception (except the tense-lax pair), reflecting the dominant role of VOT in their L1 stop distinction. Individual-level analyses further revealed that the learners' L2 proficiency was related to their use of F0 in L2 production and their use of VOT in L2 perception. With this effect of L2 proficiency controlled in the partial correlation tests, we found a significant correlation between production and perception in using VOT and F0 for the lax-aspirated stop contrast. However, the same correlation was absent for the other stop pairs. We discuss a contrast-specific role of acoustic cues to address the non-uniform patterns of the production-perception link in the L2 sound learning context.

의료용 초음파 영상 시스템에서 부엽과 격자엽의 억제 (Suppression of side lobe and grating lobe in ultrasound medical imaging system)

  • 정목근
    • 한국음향학회지
    • /
    • 제41권5호
    • /
    • pp.525-533
    • /
    • 2022
  • 초음파 영상 시스템의 수신 집속 과정에서, 채널 데이터를 2차원 푸리에 변환하여 부엽과 격자엽을 억제하는 방법을 제안하였다. 영상점에서 온 신호를 집속하면 모든 채널의 신호는 같은 위상을 가지는 직류로 나타난다. 그러나 영상점 밖에서 오는 신호를 집속하면 입사각에 따라서 다른 공간 주파수를 가지는 채널 신호로 나타난다. 따라서 집속 후의 채널 신호를 2차원 푸리에변환을 하면 입사각을 가지는 신호를 주파수 영역에서 효과적으로 분리할 수 있다. 수신 집속 지연 시간이 인가된 시간-채널 데이터를 2차원 푸리에변환을 하여 주파수 영역에서 직류 성분과 그 밖의 주파수 성분으로 분리하고, 두 값의 비율을 이용하여 가중치를 정의하였다. 초음파 영상에 가중치를 곱함으로써 부엽과 격자엽을 억제하였다. 64채널 선형 어레이에서 5 MHz의 주파수의 초음파 영상을 계산하였다. 초음파 영상에서 나타나는 격자엽은 제안한 방법을 적용하여 완전히 제거되었다. 또한 부엽이 줄어들어 측방향 해상도가 크게 증가되었다. 인체모사 영상의 시뮬레이션에서 대조도가 증가하여 병변의 진단에 도움을 줄 수 있음을 확인하였다.

실내 미세먼지 및 소음 모니터링 시스템 설계 및 구현 (Design and Implementation of an Indoor Particulate Matter and Noise Monitoring System)

  • 조현태
    • 대한임베디드공학회논문지
    • /
    • 제17권1호
    • /
    • pp.9-17
    • /
    • 2022
  • As the COVID-19 pandemic situation worsens, the time spent indoors increases, and the exposure to indoor environmental pollution such as indoor air pollution and noise also increases, causing problems such as deterioration of human health, stress, and discord between neighbors. This paper designs and implements a system that measures and monitors indoor air quality and noise, which are representative evaluation criteria of the indoor environment. The system proposed in this paper consists of a particulate matter measurement subsystem that measures and corrects the concentration of particulate matters to monitor indoor air quality, and a noise measurement subsystem that detects changes in sound and converts it to a sound pressure level. The concentration of indoor particulate matters is measured using a laser-based light scattering method, and an error caused by temperature and humidity is compensated in this paper. For indoor noise measurement, the voltage measured through a microphone is basically measured, Fourier transform is performed to classify it by frequency, and then A-weighting is performed to correct loudness equality. Then, the RMS value is obtained, high-frequency noise is removed by performing time-weighting, and then SPL is obtained. Finally, the equivalent noise level for 1 minute and 5 minutes are calculated to show the indoor noise level. In order to classify noise into direct impact sound and air transmission noise, a piezo vibration sensors is mounted to determine the presence or absence of direct impact transmitted through the wall. For performance evaluation, the error of particulate matter measurement is analyzed through TSI's AM510 instrument. and compare the noise error with CEM's noise measurement system.

외팔보에 대한 가진력수준제어를 통한 피로균열규명기법의 실험적 검증 (Experimental Verifications of Fatigue Crack Identification Method Using Excitation Force Level Control for a Cantilever Beam)

  • 김도균;이순복
    • 대한기계학회논문집A
    • /
    • 제28권10호
    • /
    • pp.1467-1474
    • /
    • 2004
  • In this study, a new damage identification method for beam-like structures with a fatigue crack is proposed. which does not require comparative measurement on an intact structure but require several measurements at different level of excitation forces on the cracked structure. The idea comes from the fact that dynamic behavior of a structure with a fatigue crack changes with the level of the excitation force. The 2$^{nd}$ spatial derivatives of frequency response functions along the longitudinal direction of a beam are used as the sensitive indicator of crack existence. Then, weighting function is employed in the averaging process in frequency domain to account for the modal participation of the differences between the dynamic behavior of a beam with a fatigue crack at the low excitation and one at the high excitation. Subsequently, a damage index is defined such that the location and level of the crack may be identified. It is shown from the analysis of vibration measurements in this study that comparison of frequency response characteristics of a beam with a single fatigue crack at different level of excitation forces enables an effective detection of the crack.

TCSC의 $H_{\infty}$ 제어에 의한 대규모 전력계통의 지역간 저주파진동 억제 Part II: $H_{\infty}$제어기 설계 (Damping Inter-area Low Frequency Oscillations in Large Power Systems with $H_{\infty}$ Control of TCSC PARTII: Design of $H_{\infty}$ Controller)

  • 김용구;전영환;송성근;심관식;남해곤
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제49권5호
    • /
    • pp.233-241
    • /
    • 2000
  • This paper presents a systematic design procedure of $H_{\infty}$ controller of TCSC for damping low frequency inter-area oscillations in large power systems. Sensitivities of the inter-area mode for changes in line susceptance are computed using the eigen-sensitivity theory of augmented system matrix and TCSC locations are selected using the line sensitivities. The reduced model required for designing a manageable-size $H_{\infty}$ controller is obtained using the reduced frequency domain system identification method and the various weighting functions are tuned systematically to provide a robust performance. The proposed $H_{\infty}$ controller proved to be very effective for damping the inter-area mode of the large KEPCO power system.

  • PDF

반잠수 쌍동선의 최적 운동제어기 설계 (Application of Optimal Control Techniques to SWATH Motion Control)

  • 박찬욱;허보현;송준태
    • 대한조선학회논문집
    • /
    • 제31권2호
    • /
    • pp.65-77
    • /
    • 1994
  • 본 논문은 SWATH선의 히브 및 피치 제어에 대한 LQ이론의 상세한 응용과정을 제시한다. 부가질량과 감쇄계수를 상하동요 고유주기에서의 값으로 근사함으로써 선형 시불변 2차 연립 미분방정식이 주파수 응답 모델로부터 유도된다. 파기진력은 사인파들의 합으로서 모델링 된다. 좋은 과도응답(transient response)과 적절한 제어핀 운동을 얻기 위하여 상태 및 제어 가중행렬의 체계적인 선택과정이 제시된다. 본 논문의 제어기 설계과정의 타당성이 시간영역 및 주파수 영역에서의 시뮬레이션과 전달함수행렬의 특이값 선도에 의해 철저히 조사되어 진다. 최종 설계된 제어시스템은 본 연구의 응용이 성공적이었음을 나타내는 좋은 전체 성능을 보여준다.

  • PDF