• 한국전문물리치료학회지
• /
• 제7권1호
• /
• pp.55-63
• /
• 2000

Physical therapists have been using balance and weight shifting training to induce improvements in standing and walking. This study compared the effects of kinetic feedback frequency and concurrent kinetic feedback on the performance and learning of a weight shifting skill in young, nondisabled adults. Sixteen young adults without known impairment of the neuromusculoskeletal system volunteered for the study. Subjects in each of three kinetic feedback groups performed a weight shifting task in an attempt to minimize error between their effort and a center of pressure (COP) template for a 12 second period. Feedback was provided: 1) concurrently (concurrent feedback), 2) after each trial (100% feedback), 3) after every other trial (50% feedback). Immediate and delayed (24 hour) retention tests were performed without feedback. During acquisition phase, the concurrent feedback group exhibited less error than either of the post response feedback group. For the immediate retention test, the 50% feedback group exhibited less error than did the 100% feedback and concurrent feedback. During the delayed retention, 50% feedback group displayed less error than did the other groups. But no significant differences were found between groups. These results suggest that practice with concurrent feedback is beneficial for the immediate performance, but not for the learning of this weight shifting skill. Lower frequency of feedback resulted in more permanent changes in the subject's ability to complete the task.

• 한국정밀공학회지
• /
• 제23권3호
• /
• pp.86-93
• /
• 2006

This study is concerned with the investigation of characteristics of an AMT (Automated Manual Transmission) which are composed of clutch part and transmission part. When a shilling signal is received from the controller, the clutch is disengaged first, and shifting action including selecting action is followed, and then the clutch is engaged last. The characteristics of transmission shifting response are affected by various parameters of clutch and transmission control elements. Analytical results are in fair agreement with experimental results. It is found that the operating pressure level is the most important for the response of AMT characteristics, and that the other parameters such as natural frequency and damping ratio of the control valve are less important.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.443-446
• /
• 2003

The vibration mode shape changed by the phase angle that can be controlled by phase-shifting ESPI system is discussed. For the phase-shifting ESPI experiment the stroboscopic illumination by using AOM(Acousto-Optic Modulator) is needed, and the initial phase angle can be adjusted by the program. The vibration mode shape is changed when the initial phase angle is changed. We examined the vibration mode shape change due to the initial phase angle change at each resonance frequency. Through this study, we found that in the vibration testing using phase-shilling ESPI the vibration mode shape is improved in the quality by adjusting exact phase angle and the error of the quantitative vibration analysis can be reduced.

• International Journal of Automotive Technology
• /
• 제7권2호
• /
• pp.155-160
• /
• 2006

This paper presents a vehicle model for analyzing the transient shifting characterisitics of a passenger car with automatic transmission. Then the presented vehicle model was linked with the dynamic model of an automatic transmission. In order to identify the parameters of the vehicle model, we installed a test equipment with an accelerometer in a conventional vehicle and performed road tests. With the proposed vehicle model, we simulated the dynamic characteristics during shifting, and benchmarked with experimental results. Moreover, a modal analysis was carried out to investigate the effect of the vehicle model in the frequency domain and to obtain the transfer function of the vehicle model. In addition, we showed the numerical results in the time domain for analyzing the effect of each stiffness element, such as engine mountings and suspensions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.854-859
• /
• 2001

An eigenvalue analysis of a tunable micro-mechanical actuator is presented. The actuator is modeled as a continuum structure. The eigenvalue modified by the tuning voltage is computed through the linearization of the relation between the electrostatic force and the displacement at the equilibrium. A staggered algorithm is employed to perform the coupled analysis of the electrostatic and elastic fields. The stiffness matrix of the actuator is modified at this equilibrium state. The displacement field is perturbed using an eigenmode profile of the actuator. The configuration change of the actuator due to perturbation modifies the electrostatic field and thus the electrostatic force. The equivalent stiffness matrix corresponding to the perturbation and the change in the electrostatic force is then added to stiffness matrix in order to explain natural frequency shifting. The numerical examples are presented and compared with the experiments in the literatures.

• Transactions on Electrical and Electronic Materials
• /
• 제18권4호
• /
• pp.211-216
• /
• 2017

The dielectric properties of two polyurethanes (PUs) with different hard segments, i.e., aromatic methylene di-p-phenyl diisocyanate (MDI) and aliphatic hexamethylene diisocyanate (HDI), were investigated in the temperature range of -100 to $100^{\circ}C$ and in the frequency range of 1 Hz to 3 kHz. The ${\alpha}$-relaxations induced by the glass transition of the equivalent soft segments in the two PUs occurred at relaxation times of ${\tau}=3.46{\times}10^{-3}s$ for MDI-PU and ${\tau}=3.39{\times}10^{-2}s$ for HDI-PU at $-20^{\circ}C$, in accord with the temperature-frequency superposition principle, resulting in similar shifting factors. However, different I-relaxations were observed for the two PUs. The I-relaxation of MDI-PU occurred due to the mobility of the chain extenders near $80^{\circ}C$ with a slower shifting rate than the ${\alpha}$-relaxation. On the other hand, I-relaxation arising from both the extender and the unconstrained hard segments of HDI-PU occurred at $70{\sim}100^{\circ}C$, indicating complicated dielectric behavior due to partial interaction with the ${\alpha}$-relaxation at high frequencies. Thus, the I-relaxation of HDI-PU did not follow the superposition principle. The dielectric behaviors of the PUs were mainly influenced by their phase transitions, which were affected by the structure and components of the materials.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1235-1238
• /
• 1998

In television stereo system, to produce the sound image for spatial impression is too difficult because of the narrow distence between two speakers. A method of widening the sound image using precedence effect was introduced but it didn't work effectively in low frequency band. In this paper, we propose a new method to produce an expanded sound image in full band of audio requency in band sound is expanded by phase shifting method and a higher frequency band sound is expanded by reflection. In simulation and experiment, the proposed system guarantees useful effect of sound image expansion in television stereo system.

• 한국항행학회논문지
• /
• 제4권1호
• /
• pp.36-44
• /
• 2000

본 논문에서는 디지털 필터를 이용하여 대역통과 신호를 기저대역에서 복원하는 것이 가능함을 보이고 있다. 2차 대역통과 샘플링은 l차 대역통과 샘플링에 비해 보다 용이하게 구현할 수 있으며, 시뮬레이션을 통해 임의 대역으로의 주파수 천이가 가능함을 보였다. 이미 잘 알려져 있는 직교샘플링 방법은 2차 대역통과 샘플링의 특별한 경우인데, 2차 대역통과 샘플링을 적용하여 NCO (Numerical Controlled Oscillator)와 mixer가 제거된 직교복조시스템을 구현할 수가 있다. 이 방식은 기존의 직교복조시스템에 비해 구현이 용이하고 I, Q채널간 매칭정확도가 우수하여 근래의 고성능 레이다나 통신기기에 응용 가능하다. 또한 시뮬레이션을 통해 이미지 성분의 제거가 가능함을 보였다.

• The Korean Journal of Ecology
• /
• 제18권2호
• /
• pp.275-283
• /
• 1995

Seral changes in floristic composition during abandoned field succession after shifting cultivation was investigated in eastern Kangwon-Do, Korea. According to the DCA ordination based on the floristic composition, sere of the dominant species was shown as follows: Digitaria sanguinalis, Persicaria spp., Commelina communis etc. in the annual stage (0∼1 years); Erigeron spp., Artemisia spp., Rubus crataegus etc. in the Erigeron-Artemisia stage (2∼6 years); Pinus densiflora, Salix spp., Miscanthus sinensis, Arundinella hirta etc. in the shrub - earlier tree stage (10∼25 years); P. densiflora, Quercus mongolica, Spodiopogon sibiricus etc. in the mid-tree stage (25∼50 years); Q. mongolica, Tripterigium regelii, Lespedeza maximowiczii, Carex siderosticta etc. in the latter tree stage (50∼80 years). In mid-tree stage, size-frequency distribution of P. densiflora was plotted as a platycurtic curve and that of Q. mongolica as a reverse J-shaped curve, which meant P. densiflora was thinned through interspecific competition and Q. mongolica was regenerated by itself in the later tree stage.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.892-901
• /
• 2018

SiC MOSFETs have been used to improve system efficiency in high frequency converters due to their extremely high switching speed. However, this can result in undesirable parasitic oscillations in practical systems. In this paper, models of the key components are introduced first. Then, theoretical formulas are derived to calculate the switching oscillation frequencies after full turn-on and turn-off in clamped inductive circuits. Analysis indicates that the turn-on oscillation frequency depends on the power loop parasitic inductance and parasitic capacitances of the freewheeling diode and load inductor. On the other hand, the turn-off oscillation frequency is found to be determined by the output parasitic capacitance of the SiC MOSFET and power loop parasitic inductance. Moreover, the shifting regularity of the turn-off maximum peak voltage with a varying switching speed is investigated on the basis of time domain simulation. The distortion of the turn-on current is theoretically analyzed. Finally, experimental results verifying the above calculations and analyses are presented.