• 한국소음진동공학회논문집
• /
• 제23권3호
• /
• pp.240-248
• /
• 2013

자동차 수동변속기 내 래틀과 같은 회전체 진동은 엔진 연소폭발 주기와 연동하여 발생한다. 이러한 충격형 진동 특성은 선형 시간 불변 분석법을 적용하여 살펴볼 수 있다. 기어의 동적 특성을 이해하기 위해, 특정 형태의 앞 바퀴 굴림 방식 수동 변속기에 대한 연구를 수행하였다. 첫째, 동특성 고유값과 주파수 응답함수를 기반으로 자유도를 줄이는 방법을 제시하였는데, 이는 행렬의 크기를 줄이는 효과적인 역할을 한다. 둘째, 단일 질량 플라이휠과 이중 질량 플라이휠의 동적 특성을 비교하였다. 모빌리티 분석을 기반으로 한 이중 질량 플라이휠의 효과를 검토하였는데, 이로부터 진동에 의해 가진되는 충격을 회피하기 위한 기본 개념을 이해 할 수 있다. 마지막으로, 두 단계 클러치 댐퍼로부터 유효 강성 값을 도출하여 선형 불변형 시스템 모델을 연구하였다. 두 단계의 서로 다른 클러치 강성조합을 이용하여 클러치 댐퍼의 동적특성에 대한 관계를 예측할 수 있다.

• 한국해안해양공학회지
• /
• 제13권2호
• /
• pp.89-99
• /
• 2001

본 논문에서는 음향 증폭장치로 널리 사용되고 있는 헤름홀츠 공명장치의 원리를 해수교환 방파제에 적용한 문제를 다뤘다. 입사파의 주파수와 공명구조물의 고유주파수가 일치되면, 공진현상으로 입사파는 공명구조물 내에서 크게 증폭된다. 공진현상으로 크게 증폭된 위치에너지는 외해로부터 들어온 공명구조물내의 깨끗한 해수를 도수로를 통하여 항만내로 공급한다. 공급된 해수는 항내의 오염된 해수를 희석·순환시켜 항내 수질개선에 도움을 준다. 선형포텐셜 이론을 가지고 공명구조물내의 파도응답을 정합점근전개법을 사용하여 해석하였다. 해석모델로 수학적 표현이 가능한 반원형 공명구조물을 채택하였다. 공명구조물이 1개가 있는 경우와 여러개가 일정한 간격을 가지고 배열된 경우를 함께 살펴보았다. 해석해의 타당성을 검증하기 위하여 2차원 수조에서 모형실험을 수행하였다. 도수로가 열린 상태가 닫힌 상태에서 공명구조물내의 파고분포와 도수로에서의 유속을 측정하였다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제12권6호
• /
• pp.299-306
• /
• 2008

Sometimes, spinal cord injury (SCI) results in various chronic neuropathic pain syndromes that occur diffusely below the level of the injury. It has been reported that behavioral signs of neuropathic pain are expressed in the animal models of contusive SCI. However, the observation period is relatively short considering the natural course of pain in human SCI patients. Therefore, this study was undertaken to examine the time course of mechanical and cold allodynia in the hindpaw after a spinal cord contusion in rats for a long period of time (30 weeks). The hindpaw withdrawal threshold to mechanical stimulation was applied to the plantar surface of the hindpaw, and the withdrawal frequency to the application of acetone was measured before and after a spinal contusion. The spinal cord contusion was produced by dropping a 10 g weight from a 6.25 and 12.5 mm height using a NYU impactor. After the injury, rats showed a decreased withdrawal threshold to von Frey stimulation, indicating the development of mechanical allodynia which persisted for 30 weeks. The withdrawal threshold between the two experimental groups was similar. The response frequencies to acetone increased after the SCI, but they were developed slowly. Cold allodynia persisted for 30 weeks in 12.5 mm group. The sham animals did not show any significant behavioral changes. These results provide behavioral evidence to indicate that the below-level pain was well developed and maintained in the contusion model for a long time, suggesting a model suitable for pain research, especially in the late stage of SCI or for long term effects of analgesic intervention.

• 대한치과기공학회지
• /
• 제39권3호
• /
• pp.197-204
• /
• 2017

Purpose: This study aims to discover the degree of department of dental technology students' oral health recognition and to find out the differences of oral health beliefs depending on oral health behaviors. Method: The subjects in this study were the students who attended department of dental technology in Daejon, Daegu, Iksan. After a survey was conducted, the collected data were analyzed with SPSS 23.0. An analysis of frequency, independent t-test, one-way ANOVA, correlation was used. Result: Among the general things related to oral health behaviors was the statistical significant differences(p<0.05) in the area of oral health belief depending on the opportunity of oral health education, attendance of oral health course, self-aware of oral health, the number of times of teeth brushing, teeth brushing status, experience and the degree of smoking. There was a positive correlation between the degree of susceptibility and that of response to severity, barrier, salience and benefit. Severity also showed the positive correlation with barrier. Higher barrier susceptibility meant higher salience and higher benefit. So was the correlation between benefit and salience. Conclusion: This study showed that college education should focus on the students' possible behaviors in order to convey the effective oral health knowledge.

• 한국의상디자인학회지
• /
• 제17권4호
• /
• pp.67-76
• /
• 2015

The purpose of this study is to set a direction for the development of men's underwear after analyzing current applications for patent regarding men's special-purpose underwear. In terms of a research method, the disclosed patents and utility models were investigated using the patent information database provided by Korea Institute of Patent Information (KIPRIS, http://www.kipris.or.kr). For this, the patents applied from 1990 to October 2015 were targeted. The keywords used for patent search were 'men's underwear' and 'men's special-purpose underwear.' When searched by the keywords above, a total of 1,089 cases were found. Except for expired or cancelled ones, 243 cases were investigated. Then, annual application trends, current registrations on literature records, classification of utility model right holders and contents by topic were analyzed. In terms of data analysis, frequency analysis, crosstabulation analysis and multiple response analysis were conducted, using SPSS 18.0. The results found the followings: In terms of annual application trends, the number of applications for patent started to gradually increase since 2007. Since 2011, it has rapidly increased. In terms of the number of patent registrations, literature registration was far higher than utility model registration. In terms of application rights, 'individually registered (58.8%)' was higher than 'registered by the organization (41.2%).' Among 243 cases, 'underwear (58%)' was the highest, followed by 'men's underwear-related items (29.2%)' and 'thermals (8.2%).' According to analysis on the details of the patent applied for men's underwear, 'penis-scrotum separation' was most focused, followed by 'disposable product' 'airy features,' 'scrotum protection' and 'structure of underwear.'

• 한국철도학회논문집
• /
• 제16권4호
• /
• pp.286-297
• /
• 2013

본 연구에서는 PSC-I 거더 교량을 대상으로, 3차원 교량 모델로 이동하중해석에 의한 엄밀한 동적 안정성 해석을 수행할 때의 모델링 방법과 해석방법에 대한 영향 평가를 수행하였다. 이를 위해 콘크리트 및 자갈궤도 등을 채용할 때의 합리적인 모델링 방법론과 물성치를 제시하였다. 또한, 궤도 모델링 유무, 궤도 종류, 거더 중심에서 받침까지의 거리 고려 여부, 직접적분법과 모달해석법 등 이동하중해석법, 필터링 등이 응답에 미치는 영향을 분석하였다.

• Smart Structures and Systems
• /
• 제4권6호
• /
• pp.727-740
• /
• 2008

A down hole vertical seismic array is a sequence of instruments installed at various depths in the earth to record the ground motion at multiple points during an earthquake. Numerous studies demonstrate the unique utility of vertical seismic arrays for studying in situ site response and soil behavior. Examples are given of analyses made at two sites to show the value of data from vertical seismic arrays. The sites examined are the Lotung, Taiwan SMART1 array and a new site installed at Jingliao, Taiwan. Details of the installation of the Jingliao array are given. ARX models are theoretically the correct process models for vertical wave propagation in the layered earth, and are used to linearly map deeper sensor input signals to shallower sensor output signals. An example of Event 16 at the Lotung array is given. This same data, when examined in detail with a Bayesian inference model, can also be explained by nonlinear filters yielding commonly accepted soil degradation curves. Results from applying an ARMAX model to data from the Jingliao vertical seismic array are presented. Estimates of inter-transducer soil increment resonant frequency, shear modulus, and damping ratio are presented. The shear modulus varied from 50 to 150 MPa, and damping ratio between 8% and 15%. A new hardware monitoring system - TerraScope - is an affordable 4-D down-hole seismic monitoring system based on independent, microprocessor-controlled sensor Pods. The Pods are nominally 50 mm in diameter, and about 120 mm long. An internal 16-bit micro-controller oversees all aspects of instrumentation, eight programmable gain amplifiers, and local signal storage.

• 한국해양공학회지
• /
• 제27권5호
• /
• pp.63-69
• /
• 2013

The mooring lines of a floating type offshore plant are known to show wide banded and bimodal responses. These phenomena come from a combination of low and high frequency random load components, which are derived from the drift-restoring motion characteristic and wind- sea, respectively. In this study, fatigue models were applied to predict the fatigue damage of mooring lines under those loads, and the result were compared. For this purpose, seven different fatigue damage prediction models were reviewed, including mathematical formula. A FPSO (floating, production, storage, and offloading) with a $4{\times}4$ spread catenary mooring system was selected as a numerical model, which was already installed at an offshore area of West Africa. Four load cases with different combinations of wave and wind spectra were considered, and the fatigue damage to each mooring line was estimated. The rain flow fatigue damage for the time process of the mooring tension response was compared with the results estimated by all the fatigue damage prediction models. The results showed that both Benasciutti-Tovo and JB models could most accurately predict wide banded bimodal fatigue damage to a mooring system.

• 대한조선학회논문집
• /
• 제30권3호
• /
• pp.75-89
• /
• 1993

본 논문은 기본적으로 미국 기계학회의 성능시험 코드에 준하여 운동 모형시험에 불확실성 해석을 적용하였다. 총 불확실성은 시험준비 과정, 계기의 검증, 데이타 취득 과정 및 분석과정에서 발생하는 오차요인들과 오차 전파 방정식에 의해 구하여진 민감도와 결합하여 구해진다. 저항추진 시험과 같은 정적시험과 운동시험과 같은 동적시험의 차이들이 불확실성 해석의 모든 과정동안 분명하게 구별되며 또한 비대칭 고정오차항목이 고려되었다. 본 불확실성 해석이 수행된 운동 응답 항목은 무차원화된 주파수의 함수로 나타낸 상하동요와 종동요의 RAO이다. 운동시험에 대한 불확실성 해석은 측정 정도를 향상시키고 오차들을 정량화하는데 유용할 뿐만아니라 여러가지 운동 해석 프로그램에 대한 검증의 기준으로 제시될 수 있다.

• Earthquakes and Structures
• /
• 제17권2호
• /
• pp.175-189
• /
• 2019

The aim of the study is to show the results of complex shaking table experimental investigation focused on the response of two models of cylindrical steel tanks under mining tremors and moderate earthquakes, including the aspects of diagnosis of structural damage. Firstly, the impact and the sweep-sine tests have been carried out, so as to determine the dynamic properties of models filled with different levels of liquid. Then, the models have been subjected to seismic and paraseismic excitations. Finally, one fully filled structure has been tested after introducing two different types of damages, so as to verify the method of damage diagnosis. The results of the impact and the sweep-sine tests show that filling the models with liquid leads to substantial reduction in natural frequencies, due to gradually increasing overall mass. Moreover, the results of sweep-sine tests clearly indicate that the increase in the liquid level results in significant increase in the damping structural ratio, which is the effect of damping properties of liquid due to its sloshing. The results of seismic and paraseismic tests indicate that filling the tank with liquid leads initially to considerable reduction in values of acceleration (damping effect of liquid sloshing); however, beyond a certain level of water filling, this regularity is inverted and acceleration values increase (effect of increasing total mass of the structure). Moreover, comparison of the responses under mining tremors and moderate earthquakes indicate that the power amplification factor of the mining tremors may be larger than the seismic power amplification factor. Finally, the results of damage diagnosis of fully filled steel tank model indicate that the forms of the Fourier spectra, together with the frequency and power spectral density values, can be directly related to the specific type of structural damage. They show a decrease in the natural frequencies for the model with unscrewed support bolts (global type of damage), while cutting the welds (local type of damage) has resulted in significant increase in values of the power spectral density for higher vibration modes.