Browse > Article
http://dx.doi.org/10.5050/KSNVE.2013.23.3.240

Study on the Dynamic Characteristics of a Manual Transmission Using Linear Models  

Yoon, Jong-Yun (STX Heavy Industry Co.)
Lee, Iljae (Department of Mechanical Engineering, Chonbuk National University)
Publication Information
Transactions of the Korean Society for Noise and Vibration Engineering / v.23, no.3, 2013 , pp. 240-248 More about this Journal
Abstract
Torsional vibrations, such as the gear rattle of the manual transmission in vehicle systems, are correlated with the firing stroke from the engine. These vibro-impacts can be examined based upon linear time-invariant analysis. In order to understand the gear dynamics, a specific manual transmission with a front-engine front-wheel drive configuration is investigated. A method to reduce the degrees of freedom is suggested based upon the eigensolutions and frequency response functions, which will lead to the development of an efficient matrix size. The dynamic characteristics of single- and dual-mass flywheels are then compared. The effect of the dual-mass flywheel is investigated based upon the mobility analysis, which will lead to understanding of the concepts for avoiding vibro-impacts. A linear time-invariant system model is examined by employing the effective clutch stiffness from a two-stage clutch damper. Thus, the relationship between the dynamic characteristics and the clutch damper can be predicted by assuming a combination of different stage stiffness levels.
Keywords
Gear; Linear Model; Dual-mass Flywheel;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Couderc, P., Callenaere, J., Hagopian, J. D. and Ferraris, G., 1998, Vehicle Driveline Dynamic Behavior: Experimentation and Simulation, Journal of Sound and Vibration, Vol. 218, No. 1, pp. 133-157.   DOI   ScienceOn
2 Chikatani, Y. and Suehiro, A., 1991, Reduction of Idling Rattle Noise in Trucks, SAE 911044, pp. 49-56.
3 Howell, T. P., Powell, N. N. and Etheridge, P., 2002, The Application of Correlated Modeling Techniques to Investigate Gear Rattle Noise in a Harley-Davidson Motorcycle, Inter-Noise 2002 Proceedings, pp. 2469-2477.
4 Shimizu, T., 1993, Mechanism of the Idle Gear Rattle Synchronized with Engine Rotation, SAE 932003 pp. 7-13.
5 Barthod, M., Hayne, B., Tebec, J. L. and Pin, J. C., 2007, Experimental Study of Gear Rattle Excited by a Multi-harmonic Excitation, Applied Acoustics 68, pp. 1003-1025.   DOI   ScienceOn
6 Rocca, E. and Russo, R., 2011, Theoretical and Experimental Investigation Into the Influence of the Periodic Backlash Fluctuations on the Gear Rattle, Journal of Sound and Vibration, Vol. 330, pp. 4738-4752.   DOI   ScienceOn
7 Laschet, A., 1994, Computer Simulation of Vibration in Vehicle Powertrains Considering Nonlinear Effects in Clutches and Manual Transmissions, SAE 941011, pp. 1-8.
8 Padmanabhan, C., Rook, T. E. and Singh, R., 1995, Modeling of Automotive Gear Rattle Phenomenon: State of the Art, SAE 951316, pp. 669-680.
9 Padmanabhan, C. and Singh, R., 1993, Influence of Clutch Design on the Reduction and Perception of Automotive Transmission Rattle Noise, Noise-Con 93 Proceedings, pp. 607-612.
10 Singh, R., Xie, H. and Comparin, R. J., 1989, Analysis of Automotive Neutral Gear Rattle, Journal of Sound and Vibration, Vol. 131, pp. 177-196.   DOI   ScienceOn
11 Hong, D. P., Chung, T. J. and Tae, S. H., 1994, A Study for the Torsional Characteristics of Clutch and Automotive Neutral Gear Rattle, Proceedings of the KSNVE Annual Autumn Conference, pp. 100-105.
12 Ahn, M. J., Cho, S. M., Yoon, J. Y., Kim, J. S. and Lyu, S. K., 2007, Linear Analysis of Geared System with a Manual Transmission, Journal of the Korean Society of Safety, Vol. 22, No. 5, pp. 1-6.   과학기술학회마을
13 Ahn, M. J., Lyu, S. K., Yoon, J. Y., Qi, Z. and Ahn, I. H., 2010, A Study of the Linear Analysis for Nonlinear Torsional System, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 2, pp. 12-19.
14 Kim, T. C. and Singh, R., 2001, Dynamic Interactions between Loaded and Unloaded Gears, SAE Transactions, Vol. 110, Section 6, pp. 1934-1943.
15 Trochon, E. P., 1997, Analytical Formulation of Automotive Drivetrain Rattle Problems, MS Thesis, The Ohio State University.
16 Hartog, J. P., 1985, Mechanical Vibrations, Dover, pp. 351-353.
17 Gaillard, C. L. and Singh, R., 2000, Dynamic Analysis of Automotive Clutch Dampers, Applied Acoustics, Vol. 60, pp. 399-424.   DOI   ScienceOn