• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.1 s.190
• /
• pp.101-109
• /
• 2007

In situations of spatio-temporal perception about visuo-auditory stimulus, researches propose optimal integration hypothesis that perceptual process is optimized to the interaction of the senses for the precision of perception. So, when the visual information considered generally dominant over any other sense is ambiguous, the information of the other sense like auditory stimulus influences the perceptual process in interaction with visual information. Thus, we performed two different experiments to certain the conditions of the interacting senses and influence of the condition. We consider the interaction of the visuo-auditory stimulation in the free space, the color of visual stimulus and sex difference of testee with normal people. In first experiment, 12 participants were asked to judge the change in the frequency of audio-visual stimulation using a visual flicker and auditory flutter stimulation in the free space. When auditory temporal cues were presented, the change in the frequency of the visual stimulation was associated with a perceived change in the frequency of the auditory stimulation as the results of the previous studies using headphone. In second experiment, 30 male and 30 female were asked to judge the change in the frequency of audio-visual stimulation using a color of visual flicker and auditory flutter stimulation. In the color condition using red and green. Both male and female testees showed same perceptual tendency. male and female testees showed same perceptual tendency however, in case of female, the standard deviation is larger than that of male. This results implies that audio-visual asymmetry effects are influenced by the cues of visual and auditory information, such as the orientation between auditory and visual stimulus, the color of visual stimulus.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.3
• /
• pp.197-204
• /
• 2012

In this thesis, studied the method to minimize the changes in frequency response and level due to the variation of the distance from the source to the microphone. selecting three microphones (omni directional, cardioid, super cardioid) which are being used generally, frequency responses were measured in accordance with the distance changes. Gotten the difference from the reference as the result of measurement, changed responses for each frequency range were compensated in comparison of the original human vocal source. In low frequency range, the low frequency boost caused by the proximity effect and decrease in accordance with the distance were compensated. The variation in mid-frequency range is comparatively small, however since the mid-range is the most important part of the human vocal signal, were compensated the mid-frequency range in comparison of the reference. The human vocal signal variation in high frequency range is extremely small and the high frequency is compensated close to the original source without difficulty. Understanding the microphone characteristics and compensations, this study showed that the response can be maintain among the change of the distance from the source to the microphone.

• Phonetics and Speech Sciences
• /
• v.14 no.2
• /
• pp.29-38
• /
• 2022

This study aimed to analyze the speech appearing in the National Institute of Korean Language's Daily Conversation Speech Corpus (2020) and reveal how the speech rate and the frequency of turn-taking affect the change in prosody units. The analysis results showed a positive correlation between intonation phrase, word phrase frequency, and speaking duration as the speech speed increased; however, the correlation was low, and the suitability of the regression model of the speech rate was 3%-11%, which was weak in explanatory power. There was a significant difference in the mean speech rate according to the frequency of the turn-taking, and the speech rate decreased as the frequency of the turn-taking increased. In addition, as the frequency of turn-taking increased, the frequency of intonation phrases, the frequency of word phrases, and the speaking duration decreased; there was a high negative correlation. The suitability of the regression model of the turn-taking frequency was calculated as 27%-32%. The frequency of turn-taking functions as a factor in changing the speech rate and prosodic units. It is presumed that this can be influenced by the disfluency of the dialogue, the characteristics of turn-taking, and the active interaction between the speakers.

• Journal of Advanced Navigation Technology
• /
• v.3 no.2
• /
• pp.120-131
• /
• 1999

For the phase measurement in the radar system using the magnetron pulse source, the STALO (Stable Local Oscillator) frequency need to be controlled to provide the stable intermediate frequency. In radar receiver, AFC(Automatic Frequency Control) circuit detects the transmitting frequency change and controls the STALO frequency to keep the intermediate frequency stable. In this paper, we designed and implimented AFC circuits for radar receiver. The frequency deviation is detected and compared with the reference frequency and the STALO frequency is controlled by the digital command signal.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.1
• /
• pp.31-34
• /
• 2006

A simple robust fundamental frequency estimator on the time-frequency domain is proposed. Combined with the appropriately designed low-pass filter, the instantaneous frequency estimator based on the Teager-Kaiser energy function can detect the fundamental frequency of speech signal. The Teager-Kaiser function can be obtained through real computation and show the change of frequency as time goes. And when a speech block with N samples is processed with a lowpass fille. with length of L, it requires $O(N{\cdot}(L+5))operations,$ compared to $O(N{\cdot}2log_2N+L))operations$ in the recently introduced wavelet and conventional instantaneous frequency method. The computer simulation confirms the usefulness of the proposed fundamental frequency estimation method.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.8
• /
• pp.879-886
• /
• 2012

The ultrasonic horn used for bonding of flip chip has been designed to vibrate at a natural frequency. The ultrasonic horn must be manufactured accurately in physical terms, because the small change of mechanical properties may result in the significant change of natural frequency. Therefore, tight tolerance is inevitable to keep the natural frequency in acceptable range. However, since tightening of the tolerance increases the manufacturing cost significantly, trade-off between the cost and accuracy is necessary. In this research, an attempt was made to design the ultra sonic horn within acceptable natural frequency while the manufacturing cost was kept as low as possible. For this purpose, among the 18 tolerances of physical terms of the ultrasonic horn, the most important 4 factors were selected using Taguchi method. The equation to relate those main factors and the natural frequency was made using response surface method. Finally, optimal design scheme for minimum manufacturing cost without a loss of performance was determined using SQP method.

• Journal of electromagnetic engineering and science
• /
• v.12 no.4
• /
• pp.227-233
• /
• 2012

This paper describes a novel and compact biosensing platform using an RF active system. The proposed sensing system is based on the oscillation frequency deviation due to the biomolecular binding mechanism on a resonator. The impedance variation of the resonator, which is caused by a specific biomolecular interaction results in a corresponding change in the oscillation frequency of the oscillator so that this change is used for the discrimination of the biomolecular binding, along with concentration variation. Also, a Surface Acoustic Wave (SAW) filter is utilized in order to enhance the biosensing performance of our system. Because the oscillator operates at the skirt frequency range of the SAW filter, a small amount of oscillation frequency deviation is transformed into a large variation in the output amplitude. Next, a power detector is used to detect the amplitude variation and convert it to DC voltage. It was also found that the frequency response of the biosensing system changes linearly with three streptavidin concentrations. Therefore, we expect that the proposed RF biosensing system can be applied to bio/medical applications capable of detecting a nano-sized biomolecular interaction.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.707-714
• /
• 2010

When problems such as line fault, breakdown of a substation or a generator, etc. arise on the grid, the Microgrid is designed to be separated or isolated from the grid. Most existing DGs(Distributed Generators) in distribution system use rotating machine. However, new DGs such as micro gas turbine, fuel cell, photo voltaic, wind turbine, etc. will be interfaced with the Microgrid through an inverter. So the Microgrid may have very lower inertia than the conventional distribution system. By the way, the rate of change of frequency depends on the inertia of the power system. Moreover, frequency has a strong coupling with active power in power system. Because the frequency of the Microgrid may change rapidly and largely during transient, appropriate and fast control strategy is needed for stable operation of the Microgrid. Therefore, this paper presents a power balancing strategy in Microgrid during transient. Despite of strong power or frequency excursions, power balancing in the Microgrid can be maintained.

• Electrical & Electronic Materials
• /
• v.8 no.2
• /
• pp.151-157
• /
• 1995

Frequency-dependent electrical properties of $C_{22}$-Quinolinium(TCNQ) LB films were investigated in a frequency range of 10[Hz]-13[MHz] along a perpendicular direction. The films were heat-treated to understand an electrodynamic response in a temperature range of 20-240[.deg. C]. Frequencydependent dielectric constants show that there are two characteristic dispersions; one is a dispersion occuring near 1[MHz] coming from the orientational polarization of the molecules and the other one is an interfacial polarization effect below 1[kHz] or so when the annealing temperature is above 80 [.deg. C]. The overall frequency-dependent dielectric constant is higher near 80[.deg. C]. It may be due to a softness of the alkyl chains. Several other methods were employed to identify the internal structure change of the films. DSC(differential scanning calorimetry) data of the $C_{22}$-Quinolinium(TCNQ) molecules shows that there is an endothermic process near 110[.deg. C] and a weak exothermic process near 180[.deg. C]. While the endothermic process is related to a disordering of the alkyl chains, the exothermic process seems to be due to a chemical structure change of the TCNQ molecules. Thickness measurement by ellipsometry shows that there is a thickness drop near 100[.deg. C], and the thickness above 120[.deg. C] becomes around 20[%] of the room-temperature value.lue.

• Computers and Concrete
• /
• v.26 no.1
• /
• pp.31-52
• /
• 2020

This paper investigates the size dependent effect on the vibration analysis of a porous nanocomposite viscoelastic plate reinforced by functionally graded-single walled carbon nanotubes (FG-SWCNTs) by considering nonlocal strain gradient theory. Therefore, using energy method and Hamilton's principle, the equations of motion are derived. In this article, the effects of nonlocal parameter, aspect ratio, strain gradient parameter, volume fraction of carbon nanotubes (CNTs), damping coefficient, porosity coefficient, and temperature change on the natural frequency are perused. The innovation of this paper is to compare the effectiveness of each mentioned parameters individually on the free vibrations of this plate and to represent the appropriate value for each parameter to achieve an ideal nanocomposite plate that minimizes vibration. The results are verified with those referenced in the paper. The results illustrate that the effect of damping coefficient on the increase of natural frequency is significantly higher than the other parameters effect, and the effects of the strain gradient parameter and nonlocal parameter on the natural frequency increase are less than damping coefficient effect, respectively. Furthermore, the results indicate that the natural frequency decreases with a rise in the nonlocal parameter, aspect ratio and temperature change. Also, the natural frequency increases with a rise in the strain gradient parameter and CNTs volume fraction. This study can be used for optimizing the industrial and medical designs, such as automotive industry, aerospace engineering and water purification system, by considering ideal properties for the nanocomposite plate.