• 한국경영과학회지
• /
• 제30권3호
• /
• pp.67-80
• /
• 2005

This paper deals with a container terminal where containers are discharged by quay cranes from a ship and transported by a fleet of vehicles to the terminal yard. Since container terminals are fully utilized in general, It is important to increase terminal throughput by discharging the containers out of the ship without any delay, At the operational level, it should be decided which vehicle transports which container. The vehicle dispatching decision should be carefully made since the container discharging time increases when the quay cranes wait idle for the vehicles. This paper presents vehicle dispatching heuristics with the objective of minimizing the total container discharging time. The heuristics are based on a network flow model and a look-ahead concept. Through some experiments, the performance of the dispatching methods is evaluated.

• 한국안전학회지
• /
• 제13권2호
• /
• pp.13-21
• /
• 1998

This is a study on the natural vibration characteristics of Vehicle frame. Nowadays, many trucks freight the over-load, do the car designers consider the over-load about 200% in the design. It's necessary to make the model of a vehicle and simulate it for the test of driving condition, durability and vibration behavior before the vehicle is manufactured. If it is possible to make a simulation using the static and dynamic analysis, this is very useful in accomplishing an optimal design of the vehicle. In this paper, we studied the vibration characteristics of a truck body frame. The automobile body frame model for experiment is made smaller than real size frame with the ratio of 1/10. The vibration characteristics of a frame is considered as one of main factors in analyzing and improving the problem for ride comfort, noise and vibration reduction. Therefore, we experimented two method to neglect the nonlinearity. First is bolting and second is welding at the joint section. We compared computer simulation results and experimental data.

• 한국항만경제학회지
• /
• 제38권4호
• /
• pp.119-137
• /
• 2022

본 논문은 위수탁제도에 대한 운송회사와 위수탁차주간의 인식 차이를 분석하여 화물운송사업의 지속적 발전 방안 도출을 위한 근거를 제시하는 것을 목적으로, 우리나라 화물자동차 운송시장에서 위수탁제도의 필요성을 확인하고자 하였다. 국내 운송시장 현황에 대해 운송회사와 위수탁차주를 대상으로 설문조사를 실시, 양자간의 인식을 비교 분석하였다. 전반적으로 위수탁제에 대한 만족도는 물량을 취급하는 운송회사, 물량을 지급하지 않은 운송회사, 물량취급회사 소속의 위수탁차주, 비물량취급회사 소속의 위수탁차수의 순으로 나타났다. 개별 문항에서도 비슷한 결과를 얻을 수 있었다. 운송회사와 위수탁차주가 화물자동차 운송시장에서 서로 상생하여 발전하기 위해서는 상대적으로 만족도가 낮은 물량을 취급하지 않는 운송회사 소속의 위수탁차주의 만족도를 높일 수 있는 전략 마련이 필요하다.

• 한국철도학회논문집
• /
• 제20권3호
• /
• pp.299-310
• /
• 2017

본 연구에서는 3-piece 마찰 웨지 화차의 주행성능을 예측하기 위해 ADAMS/View에서 독립하중 마찰 웨지 모델을 개발하였다. 마찰 웨지 모델은 볼스터의 좌우, 수직방향에 따른 마찰을 각각 구현해줄 수 있다. 개발된 마찰 웨지 모델은 ADAMS/Rail 차량 모델에 적용하여 동역학 해석 결과를 얻었다. 대상차량은 임계속도 210km/h를 가진다. 직선 안정성 해석에서 UIC518에 근거해 차체의 횡, 수직방향 한계 가속도에 만족하는 것을 확인하였다. 300R 곡선에서 해석 적용 속도는 70km/h로 UIC518에 근거해 차체, 대차의 한계 가속도에 만족하였다. 또한 "철도차량 안전기준에 관한 규칙"의 윤중감소율, 횡압, 탈선계수에 만족하는 것을 확인하였다.

• 한국포장학회지
• /
• 제21권2호
• /
• pp.61-65
• /
• 2015

Agricultural products packaged for transportation are put in the various dangerous environments owing to the damage factors like vibration, shock, compression, climate etc. under the distribution process. On fruits packaging for transportation, especially, the shock and vibration is considered as the most important damage factors. A major cause of shock damage to fruits is drops during manual handling. Especially, the damages of fruits during the parcel delivery service are very serious. The parcel delivery services of fruits are increasing and contribute to increasing of farm house earning. Also, the freight vehicle is mostly used to transport the fruits. Shock and impact generated by the freight vehicle may give serious damage to fruits. The optimum packaging design of parcel delivery service of fruits during transportation is required to reduce the fruits damages. In order to design the packaging system for parcel delivery service of fruits considering the transportation environment, the comprehension of characteristics for vibration and shock generated by manual handling and acting on transportation vehicles under various road conditions and loading methods is required. This research was performed to analyze the shock characteristics, acceleration level and power spectral density (PSD) during the parcel delivery service of fruits. The overall level of recommended PSD profile in a specific transportation of parcel delivery service for fruits was $0.63G_{rms}$.

• 한국산학기술학회논문지
• /
• 제18권12호
• /
• pp.778-784
• /
• 2017

본 논문에서는 철도화물 물류 효율화를 위한 유선 분산제어시스템과 무선 분산제어시스템 구성방안을 제안하고, 유선 분산제어시스템에 대한 검증을 수행하였다. 검증조건은 화물차량 50량을 연결하여 부산신항에서 진례역까지 21km를 평균속도 약 100km/h로 왕복 운행하였다. 검증결과는 분산중련에 의하여, 제어차와 피제어차의 견인출력과 제동출력이 분산됨을 확인하였다. 이와 같은 분산제어 적용시 기존 화물수송의 2배이상의 물류효율성향상을 기대할 수 있다. 다만, 유선 분산제어시스템의 경우 케이블 포설 및 유지보수가 어려우며, 화물차량의 편성 변경조성이 불가능한 단점이 있다. 유선 분산제어시스템의 검증을 통하여 국내 화물차량에 분산제어시스템 적용가능성을 확인하고, 이를 발전시켜 무선분산제어시스템 적용하기 위함이다. 무선 분산제어시스템 적용을 위하여, 검증구간에 ISM 대역에 대한 전파환경분석을 수행하였고, 그 결과, 해당 구간에 ISM 대역에 Wifi 기술 적용이 가능함을 확인하였다. 또한 대상 차량에 신규 설치되는 WDP(Wireless Distributed Power) 장치 적용을 위하여 추진/제동/종합제어장치와의 송수신 제어신호에 대하여 정의하였다. 무선 분산제어시스템의 경우, 적용과 운용의 편의성이 보장되지만, 차량의 제어를 무선에 의존함에 따라 신뢰도와 비상시 안전대책 수립이 선행되어야 한다.

• Journal of Biosystems Engineering
• /
• 제33권1호
• /
• pp.45-50
• /
• 2008

Shock and vibration inputs are transmitted from the transporting vehicle through the packaging box to the fruit. The vibration causes sustained bouncing of fruits against each other and the container wall. The steady state vibration input may cause serous fruit injury, and the damage is particularly severe if the fruits are bounced at its resonance frequency. The determination of the resonance frequencies of the fruits and vegetables may help the packaging designer to design the proper packaging system providing adequate protection of the fruits from external impact or shock. In this study, to analyze the vibration properties of the apples for optimum packaging design during transportation, the random vibration tests were carried out. From the results of random vibration test, the resonance frequency and power spectral density (PSD) of the packaged freight of apples in the test were in the range of 82 to 97 Hz and 0.0013 to 0.0021 $G^2/Hz$ respectively and the resonance frequency and PSD of the packaged apples were in the range of 13 to 71 Hz and 0.0143 to 0.0923 $G^2/Hz$ respectively.

• 한국포장학회지
• /
• 제11권1호
• /
• pp.11-16
• /
• 2005

Fruits are subjected to complex dynamic stresses in the transportation environment. During a long journey form the production area to markets, there is always some degree of vibration present. Vibration inputs are transmitted from the vehicle through the packaging to the fruit. Inside, these cause sustained bouncing of fruits against each other and container wall. These steady state vibration input may cause serious fruit injury, and this damage is particularly severe whenever the fruit inside the package is free to bounce, and is vibrated at its resonance frequency. The determination of the resonant frequencies of the fruit may help the packaging designer to determine the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. The first frequency of the pear in packaged freight be stacked in resonance frequency band of the pear packaged freight was increased from the bottom to the top of the stack but the second frequency of that in resonance frequency band of the pear was decreased. This indicated that the high damage score of the pear in bottom tier in vibration test was due to higher acceleration level in resonance frequency band of the pear.

• Journal of Mechanical Science and Technology
• /
• 제19권7호
• /
• pp.1469-1477
• /
• 2005

Vibrations related to ride comfort should be considered at the beginning of design stage. In general, ride comfort of human is mainly affected by vibration transmitted from the floor and seat. Also, vibration level is very important regarding with running safety on freight wagon. To ensure ride comfort for passenger coach and vibration level for freight wagon, tests had been repeated by different test procedures with several equipments. With different measuring and evaluations for these results, it took much time to evaluate test results. In this paper, a new evaluation procedure was developed combining several software for ride comfort and vibration level test on railway vehicles. In addition, this developed system is capable of ride comfort test and vibration test by a single integrated system that is capable of immediate reporting the test result. With this developed system, the comfort in a passenger coach and the vibration in a freight car were evaluated. And the simulation results from the proposed system are verified by a field test.

• 대한안전경영과학회지
• /
• 제20권2호
• /
• pp.1-8
• /
• 2018

This study aims to provide a real-time information to the driver by effectively operating the advanced safety device attached to the freight vehicle, thereby minimizing insecure behavior of the driver such as speeding, rapid acceleration, sudden braking, And improve driving habits to prevent accidents and save energy. Advanced safety equipment is a device that warns the driver that the vehicle leaves the driving lane regardless of the intention of the driver and reduces the risk of traffic accidents by mitigating or avoiding collision by detecting a frontal collision during driving.The main contents of this report are as follows: In case of installing a warning device on a lane departing vehicle (excluding a light vehicle) and a lorry or special vehicle with a total weight exceeding 3.5 tonnes, the driver must continue to operate unless the driver releases the function.In addition, when the automatic emergency braking system is installed, the structure should be such that the braking device is operated automatically after warning the driver when the risk of collision with the running or stopped vehicle in the same direction is detected in front of the driving lane.