• The Korean Journal of Food And Nutrition
• /
• v.11 no.4
• /
• pp.409-415
• /
• 1998

This study was carried out to investigate the effects of freezing temperature on quality of vacuum packaging freezed beef. In case of thaw drip loss, the freezing of -3$^{\circ}C$ and -20$^{\circ}C$ were 5.23% and 5.17% to 60 days respectively, were increased significantly during freezing. The cooking loss of water bath and pan were increased significantly during freezing than the beginning of freezing, but were no different between -3$^{\circ}C$ and -20$^{\circ}C$. The salt soluble protein extractability was decreased during freezing, the -20$^{\circ}C$ freezing was higher than -3$^{\circ}C$freezing. The water soluble protein extractability was increased during freezing higher than during freezing. The myoglobin denatured percentage of the -3$^{\circ}C$ freezing was higher than -20$^{\circ}C$ freezing, the 15 days storage of -3$^{\circ}C$ freezing was highest to 96%. The shear force value was not change during freezing, the myofibrillar fragmentation index during freezing was higher than the beginning of freezing, but was not change during freezing. The pH was decreased to freezing 45 days, after that increased.

• Applied Biological Chemistry
• /
• v.35 no.4
• /
• pp.219-226
• /
• 1992

The effect of freezing on cooking times, tastes and microstructures of beans were examined. Freezing was effective in shortening of cooking time and improving of the taste: while the cooking time was reduced to one-half by freezing, textures, flavors and overall acceptabilities of black bean and soybean were improved by freezing. A high correlation was found between sensory texture and Instron puncture force, and sensory texture was predictable from puncture force using equation. The microstructure of cotyledonary cells of soybean was characterized with thick cell wall and no difference was observed between frozen and non-frozen soybean. But the spherosome enclosing the protein body was destructed by freezing.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.4
• /
• pp.871-875
• /
• 1999

This study was carried out to investigate the effects of freezing temperature on the quality of thawing aged beef loin. Drip loss was higher at 3oC freezing than at 20oC freezing, showing 17.21% drip loss after 6 days aging by 3oC freezing, 14.92% drip loss 12 days aging by 20oC freezing. Cooking loss by both water bath and pan boiling were decreased with increased in aging days. The salt soluble protein extractability of the beef loin was increased until 9 days aging by both 3oC and 20oC freezing, after that was decreased. The L value of the beef loin was high until 9 days aging by 3oC freezing, after that the L value of that was decreased. And the aging at 20oC freezing was high significantly with increased aging days. The a value of the beef loin was low significantly in 6 and 9 days aging by 3oC freezing, 20oC freezing was low significantly with increased aging days. The b value of the beginning of aging was higher with increased aging days. The percentage of denatured myoglobin of the beginning of aging was the highest, then those of 3oC and 20oC freezing showed 89.70% and 88.00%, respectively. The shear force of the beef loin was decreased with aging days, but the myofibrillar fragmentation index increased with aging days. The pH of the beef loin increased until 6 days of aging by both 3oC and 20oC freezing, after that the pH decreased.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.5
• /
• pp.482-487
• /
• 1998

This study was carried out to investigate the effects of freezing temperature on quality of thawed beef loin. In case of thaw drip loss, the freezing of -3$^{\circ}C$ and -2$0^{\circ}C$ were higest by 3.4% to 30 days and by 1.8% to 60 days, respectively. And the thaw drip loss of -3$^{\circ}C$ freezing was more than -2$0^{\circ}C$ freezing. The cooking loss of water bath and pan boiling were increased significantly during freezing than the beginning of freezing, but were not different -3$^{\circ}C$ and -2$0^{\circ}C$. The salt soluble protein extractability was decreased during freezing, the -2$0^{\circ}C$ freezing was higher than -3$^{\circ}C$ freezing. The water soluble protein extractability of -3$^{\circ}C$ freezing was not significant different during freezing storage, that freezed at -2$0^{\circ}C$ was increased during freezing. The "L" value of the beginning of freezing was higher than during freezing, the "a" value was not different during freezing, and the "b" value during freezing was higher than the beginning of freezing. The myoglobin denatured percentage of the -3$^{\circ}C$ and -2$0^{\circ}C$ freezing were highest by 94.4% to 45 days and by 94.0% to 15 days, respectively. The shear force value during freezing was higher than the beginning of freezing, the myofibrillar fragmentation index was not significant different during freezing. The pH was increased to freezing 30 days, after that was decreased.ays, after that was decreased.

• Geomechanics and Engineering
• /
• v.22 no.3
• /
• pp.245-254
• /
• 2020

The interaction between the frozen soil and building structures deteriorates with the increasing temperature. A nuclear magnetic resonance (NMR) stratification test was conducted with respect to the unfrozen water content on the interface and a shear test was conducted on the frozen soil-structure interface to explore the shear characteristics of the frozen soil-structure interface and its failure mechanism during the thawing process. The test results showed that the unfrozen water at the interface during the thawing process can be clearly distributed in three stages, i.e., freezing, phase transition, and thawing, and that the shear strength of the interface decreases as the unfrozen water content increases. The internal friction angle and cohesive force display a change law of "as one falls, the other rises," and the minimum internal friction angle and maximum cohesive force can be observed at -1℃. In addition, the change characteristics of the interface strength parameters during the freezing process were compared, and the differences between the interface shear characteristics and failure mechanisms during the frozen soil-structure interface freezing-thawing process were discussed. The shear strength parameters of the interface was subjected to different changes during the freezing-thawing process because of the different interaction mechanisms of the molecular structures of ice and water in case of the ice-water phase transition of the test sample during the freezing-thawing process.

• Food Science of Animal Resources
• /
• v.31 no.6
• /
• pp.799-806
• /
• 2011

This study was conducted to evaluate the effect of the aging period prior to freezing on the meat quality of Hanwoo longissimus dorsi (LD) muscle. Three different combinations of aging and freezing periods (0/90, 20/70, and 40/50) were examined using LD muscle at 24 h postmortem under an identical storage time of 90 d. The pH and lightness slightly increased with increasing aging period. However, there were no significant (p>0.05) differences in redness and yellowness. The solitary freezing treatment (0/90) had the significantly (p<0.05) lowest moisture content. The un-aged treatment had a significantly (p<0.05) higher total loss than the aged treatments due to an increase in thaw drip loss. The aging significantly improved the myofibrillar fragmentation index and shear force of Hanwoo LD muscle (p<0.05). In addition, the aged treatments produced a higher flavor, tenderness, juiciness, and overall acceptability relative to un-aged treatment. However, there was no significant (p>0.05) difference in shear force and sensorial properties between 20 and 40 d aging prior to freezing. Therefore, 20 d aging prior to freezing may be a sufficiently effective strategy to improve the tenderness and sensorial properties of Hanwoo LD muscle.

• Journal of the Korean Society for Railway
• /
• v.14 no.3
• /
• pp.240-247
• /
• 2011

Finite element analysis was undertaken to investigate the effect of freezing force of water unexpectedly penetrated into inserts used in railway sleeper on pullout capacity of anchor bolts for fixing base-plate onto concrete sleeper. Based on the in-situ investigation and measurement of geometry of railway sleeper and rail-fastener, the railway sleeper was modeled by 3D solid elements. Nonlinear and fracture properties for the finite element model were assumed according to CEB-FIP 1990 model code. And the pullout maximum load of anchor bolt obtained from the model developed was compared with experimental pullout maximum load presented by KRRI for verification of the model. Using this model, the effect of position of anchor bolt, amount of fastening force applied to the anchor bolt, and compressive strength of concrete on pull-out capacity of anchor bolts installed in railway sleeper was investigated. As a result, it is found that concrete railway sleepers could be damaged by the pressure due to freezing of water penetrated into inserts. And the pullout capacity of anchor bolt close to center of railway is slightly greater than that of the others.

• Food Science of Animal Resources
• /
• v.41 no.6
• /
• pp.1012-1021
• /
• 2021

This study evaluated the effect of freezing rate on the quality characteristics of pork loin to establish an objective standard for rapid freezing. To generate various freezing rates, three air flow rates (0, 1.5, and 3.0 m/s) were applied under three freezing temperatures (-20℃, -30℃, and -40℃). Based on the results, freezing rates ranged from 0.26-1.42 cm/h and were graded by three categories, i.e, slow (category I, >0.4 cm/h), intermediate (category II, 0.6-0.7 cm/h) and rapid freezing (category III, >0.96 cm/h). Both temperature and the air flow rate influenced the freezing rate, and the freezing rate affected the ice crystal size and shear force in pork loin. However, the air flow rate did not affect thawing loss, drip loss or the color of pork loins. In the comparison of freezing rates, pork belonging to category II did not show a clear difference in quality parameters from pork in category I. Furthermore, pork in category III showed fresh meat-like qualities, and the quality characteristics were clearly distinct from those of category I. Although the current standard for rapid freezing rate is 0.5 cm/h, this study suggested that 0.96 cm/h is the lowest freezing rate for achieving meat quality distinguishable from that achieved with conventional freezing, and further increasing the freezing rate did not provide advantages from an energy consumption perspective.

• Food Science of Animal Resources
• /
• v.26 no.4
• /
• pp.464-470
• /
• 2006

This study was carried out to investigate the effect of various high pressure freezing treatments on the physical properties of pork To compare the effect of freezing on meat quality, atmospheric freezing (AF), pressure and freezing (PF), pressure shift freezing (USF) and pressure assisted freezing (PAF) were conducted at pressure of 100 MPa. Water binding properties, shear force and colour were measured as physical properties of pork PAF showed shorter phase transition time than PSF. Although significant increase (p<0.05) in water binding properties was found only at PAF, meat frozen under hydrostatic pressure environment showed improved water binding properties. However, all high pressure freezing treatment caused significantly increased shear force (p<0.05), especially at PF treatment. In color, all high pressure freezing treatments showed significantly higher color parameters (p<0.05) than AF, whilst no significant differences among high pressure freezing treatments were found (p>0.05). Therefore the result indicated that applied hydrostatic pressure improved functional properties of pork with increasing freezing rate and PAF had more potential benefit than PSF at mild pressure range.

• Geomechanics and Engineering
• /
• v.24 no.6
• /
• pp.531-543
• /
• 2021

Freezing and thawing of pore water within backfill can affect the stability of retaining wall as the phase change of pore water causes changes in the mechanical characteristics of backfill material. In this study, the effects of freezing and thawing on the mechanical performance of retaining wall with granular backfill were investigated for various temperature and groundwater level (GWL) conditions. The thermal and mechanical finite element analyses were performed by assigning the coefficient of lateral earth pressure according to phase change of soil for at-rest, active and passive stress states. For the at-rest condition, the mobilized lateral stress and overturning moment changed markedly during freezing and thawing. Active-state displacements for the thawed condition were larger than for the unfrozen condition whereas the effect of freezing and thawing was small for the passive condition. GWL affected significantly the lateral force and overturning moment (Mo) acting on the wall during freezing and thawing, indicating that the reduction of safety margin and wall collapse due to freezing and thawing can occur in sudden, unexpected patterns. The beneficial effect of an insulation layer between the retaining wall and the backfill in reducing the heat conduction from the wall face was also investigated and presented.