• Oral Biology Research
• /
• v.42 no.4
• /
• pp.198-207
• /
• 2018

Guided tissue regeneration (GBR) has been used to promote new bone formation in alveolar bone reconstruction at defective bone sites following tooth loss. Bone grafts used in GBR can be categorized into autogenous, xenogenous, and synthetic bones, and human allografts depending on the origin. The purpose of this study was to compare the rates of bone regeneration using two different bone grafts in the cranial defects of rabbits. Ten New Zealand rabbits were used in this study. Four defects were created in each surgical site. Each defect was filled as follows: with nothing, using a 50% xenograft and 50% human freeze-dried bone allograft (FDBA) depending on the volume rate, human FDBA alone, and xenograft alone. After 4 to 8 weeks of healing, histological and histomorphometric analyses were carried out. At 4 weeks, new bone formation occurred as follows: 18.3% in the control group, 6.5% in group I, 8.8% in group II, and 4.2% in group III. At 8 weeks, the new bone formation was 14.9% in the control group, 36.7% in group I, 39.2% in group II, and 16.8% in group III. The results of this study suggest that the higher the proportion of human FDBA in GBR, the greater was the amount of clinically useful new bone generated. The results confirm the need for adequate healing period to ensure successful GBR with bone grafting.

• Journal of Periodontal and Implant Science
• /
• v.35 no.3
• /
• pp.687-702
• /
• 2005

The purpose of this study is to examine the effect of non-resorbable membrane such as e-PTFE which was used with DFDB in bone regeneration on dehiscence defect in peri-implant area. Amomg the patients, who have recieved an implant surgery at the department of Periodontics in Dan Kook University Dental Hospital, 12 patients showed implant exposure due to the dehiscence defect and 15 implants of these 22 patients were the target of the treatment. Periodontists randomly applied $Gore-Tex^{(R)}$ to the patients and treated them with antibiotics for five days both preoperatively and postoperatively. Reentry period was 26 weeks on average in maxilla and 14 weeks on average in mandible. The results were as follows : 1. Dehiscence bone defect frequently appeared in premolar in mandible and anterior teeth in maxilla respectively. 2. Among 15 cases, 1 membrane exposure was observed and in this case, regenerated area was decreased. 3. In non-resorbable membrane, bone surface area $9.25{\pm}4.84$ preoperatively and significantly increased to $11.48{\pm}7.52$ postoperatively(0.05). 4. The increase of bone surface area in non-resorbable membrane was $2.23{\pm}3.38$. 5. As a result of histopathological finding, DFDB surrounded by new bone formation and lamellate bone, resorption of DFDB and bone mineralization was found. Also, fibrosis of connective tissue beneath the membrane was found. This study shows that the surgical method using DFDB and non-resorbable membrane on dehiscence defect in peri-implant area is effective in bone regeneration.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.4
• /
• pp.360-365
• /
• 1999

This study was aimed to suggest to better treatment method of jaw cyst that the maximum diameter was wider than 3cm, using different treatment and clinical and radiographic result. We divided the 60 patients into three groups, group A(20 patients) were treated with cyst enucleation and Decalcified Freeze-Dried Allogeneic Bone(DFDB) graft, group B(20 patients) were treated with cyst enucleation and autogenous bone graft, group C(20 patients) were treated with only cyst enucleation. Each group was evaluated with panoramic radiograph and clinical sign & symptom at pre-op and post-op(immediate, 6, 12, 24, 36 month). Bone density was evaluated with disital densitometer. The result was as follows : 1. Post-Op infection was higher in group C(4 pts.) than in group A(1 pt.) and B(1 pt.) 2. Post-Op gingival recession was higher in group C(3 Pts.) than in group A(1 pt.) and B(1 pt.) 3. Anatomic distortion was higher in group C(3 Pt.) than in group A(1 Pt.), and B(1 pt.) 4. Reoperation was done in two patients who were in group C 5. There were donor site morbidity in two patients 6. There was no significant difference between group A and B in their bony density in their follow up period(p>0.05). 7. There were significant differences between group A, B and group C in their bony density until post-op 24 months but a little differences at post-op 36 months(P<0.01)

• Journal of Korean Neurosurgical Society
• /
• v.29 no.8
• /
• pp.1043-1049
• /
• 2000

Objective : This study was undertaken to evaluate the availability of allogenic fibular bone graft filled with autogenous bone dust in anterior cervical fusion after cervical discectomy. Methods : During a 4-year period(1995-1998), twenty four cases of anterior cervical fusion after discectomy were performed with fibular allograft filled with autogenous bone dust in degenerative cervical disease. We used freeze-dried fibular allograft and autogenous bone dust. Autogenous bone dust obtained from spondylotic spurs, osteophytes, and during foraminotomy. Cervical plating system was done at 8 patients. 5 patients were 1 level and 3 patients were 2 levels. All patients were routinely evaluated after surgery at 2 weeks, 1 month, 3 months, 5 months and 12 months. Mean follow-up period was 21months. Results : Eighty eight percent of the patients were found to have excellent or good clinical results. Radiographic follow-up revealed that 92% of the patients obtained complete or partial union by 5 months after surgery. One patient had graft extrusion immediately after surgery and had the graft reinserted. Two patients had longitudinal graft fractures. There were no graft related complications. Conclusion : Fibular allograft filled with autogenous bone dust for cervical interbody fusion after discectomy is an ideal graft material by showing obvious benefits of good fusion rate and elimination of donor site complications. And also we were able to obtain satisfactory clinical outcome.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.4
• /
• pp.181-187
• /
• 2014

Objectives: The purpose of this preliminary study is to evaluate the effectiveness of a customized, three-dimensional, preformed titanium mesh as a barrier membrane for peri-implant alveolar bone regeneration. Materials and Methods: Ten patients were recruited for this study. At the time of implant placement, all patients had fenestration or a dehiscence defect around the implant fixture. A mixture of particulate intraoral autologous bone and freeze-dried bone allograft was applied to the defect in a 1 : 1 volume ratio and covered by the preformed titanium mesh. A core biopsy specimen was taken from the regenerated bone four months postoperatively. Patients were followed for 12 months after the definitive prosthesis was placed. Results: Satisfactory bone regeneration with limited fibrous tissue was detected beneath the preformed titanium mesh. Histologic findings revealed that newly formed bones were well-incorporated into the allografts and connective tissue. New growth was composed of approximately 80% vital bone, 5% fibrous marrow tissue, and 15% remaining allograft. All implants were functional without any significant complications. Conclusion: The use of preformed titanium mesh may support bone regeneration by maintaining space for new bone growth through its macro-pores. This preliminary study presents the efficacy of a preformed titanium mesh as a ready-to-use barrier membrane around peri-implant alveolar bone defect. This preformed mesh is also convenient to apply and to remove.

• Journal of Periodontal and Implant Science
• /
• v.34 no.2
• /
• pp.393-410
• /
• 2004

The purpose of this study was to investigate effect of enamel matrix derivative on guided bone regeneration with intramarrow penetration in rabbits. Eight adult male rabbits (mean BW 2Kg) were used in this study. Intramarrow penetration defects were surgically created with round carbide bur(HP long #6) on calvaria of rabbits. Defects were assigned to the control group grafted with mixture of the same quantity of demineralized freeze-dried bone allograft and deproteinized bovine bone mineral. Then, guided bone regeneration was carried out using resorbable membrane and suture. Enamel matrix derivative applied to defects was assigned to the test group. And treated as same manners as the control group. At 1, 2, 3 and 8 weeks after the surgery, animals were sacrificed, specimens were obtained and stained with Hematoxylin-Eosin for light microscopic evaluation. The results of this study were as follows : 1. At 1, 2 and 3 weeks, no differences were observed between the control group and the test group in the aspect of bone formation around bone graft. 2. Proliferation of blood capillary was faster in the test group than in the control group. 3. Bone regeneration in intramarrow penetration was faster in the test group than in the control group. 4. At 8 weeks, new osteoid tissue formation around bone graft was more prominent in the test group than in the control group. From the above results, enamel matrix derivative might be considered as the osteopromotion material and effective in the guided bone regeneration with intramarrow penetration.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.36 no.4
• /
• pp.146-153
• /
• 2014

Purpose: This study compares and evaluates the efficacy of graft materials after maxillary sinus bone grafts with autogenous tooth bone graft material (AutoBT), demineralized freeze-dried bone allograft (DFDBA) and deproteinized bovine bone mineral (DBBM). Methods: The study involved 30 sinuses in 26 patients who visited the Division of Oral and Maxillofacial Surgery, Department of Dentistry in Ajou University Hospital and received either AutoBT, DFDBA or DBBM with sinus elevation using the lateral window technique. Sinus graft height was measured before, immediately after, and six months after bone graft with panoramic radiography and the height changes of the sinus floor was compared according to the graft materials. Results: After six months, the decrease ratio of graft heights were 13.57% for AutoBT group, 14.30% for DFDBA group, and 11.92% for DBBM group. There was no statistically significant difference. Conclusion: The new maxillary sinus floor formed by the upper border of bone graft material, can repneumatize after the maxillary sinus elevation. Thus, long-term stability of sinus graft height represents an important factor for implant success. We found that the three graft materials for sinus elevation do not differ significantly and all three graft materials showed excellent resistance to maxillary sinus repneumatization. However, due to the special circumstances of the maxillary sinus and small sample, the actual difference between the three graft materials may not have been detectable. Therefore further study needs to be conducted for more reliable study results.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.449-459
• /
• 2006

DFDBA(Decalcified freeze-dried bone allograft) is one of the allograft materials for periodontal bone regeneration. DFDBA provides an osteoconductive surface and osteoinductive factors. Therefore, DFDBA have been used successfully to regenerate the attachment apparatus during periodontal treatment. But recent studies was reported that wide variations in commercial bone bank preparations of DFDBA do exist, including the ability to induce new bone formation. DFDBA was experimental materials that was recovered, processed, tested, shipped and invoiced through Musculoskeletal Transplant Foundation. MTF(Musculoskeletal Transplant Foundation) is the world largest, non-profit, AATB(American Association of Tissue Banks) accredited tissue bank. The objective of this study was to determine the effects of serial dilutions of a DFDBA on human fetal osteoblastic cell proliferation and their potential to form and mineralize bone nodules. Human fetal osteoblastic cell line(hFOB 1.19) was cultured with DMEM and SSE($1{\mu}g/m{\ell}$,$10{\mu}g/m{\ell}$, $100{\mu}g/m{\ell}$, $1mg/m{\ell}$) at $34^{\circ}C$ with 5% CO2 in 100% humidity. Cell proliferation was significantly increased at $1mg/m{\ell}$, $100{\mu}g$, $10{\mu}g/m{\ell}$, $1{\mu}g/m{\ell}$, $100ng/m{\ell}$, $10ng/m{\ell}$, $1ng/m{\ell}$ of DFDBA after 5 days incubation (p<0.05). Alkaline Phosphatase(ALP) level was significantly increased in $100ng/m{\ell}$, $10ng/m{\ell}$, $1ng/m{\ell}$ of DFDABA(p<0.05). A quantified calcium accumulation was significantly increased at $1ng/m{\ell}$, $10ng/m{\ell}$ of MTF(p<0.05). These results indicated that DFDBA has an inductive effect on bone formation in vitro.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.2
• /
• pp.127-134
• /
• 2020

Purpose: The aims of this study were (1) to investigate the relationship between the characteristics of allogenic bone block and the compressive strength of an allogenic bone block measured by biomechanical experiments, and (2) to compare the maximum pressure load of allogenic bone block with the gap pressure measured at the high tibial opening osteotomy. Materials and Methods: Ten patients who provided informed consent for gap pressure measurements during opening wedge high tibial osteotomy (OWHTO) were included. The gap pressures were measured at 1 mm intervals while opening the osteotomy site from 8 mm to 14 mm. Seventeen U-shaped allogenous wedge bone blocks were made from the femur, tibia, and humerus. The height, width, cross-sectional area, and cortex thickness of the bone blocks were measured, along with the maximum compressive load just before breakage. The relationship between these characteristics and the maximum pressure load of the bone blocks was evaluated. The gap pressures measured in OWHTO were compared with the maximum pressure loads of the allogenous wedge bone blocks to evaluate the possibility of inserting allogenous wedge bone blocks into the osteotomy site without a distractor in OWHTO. Results: The OWHTO gap pressure increased with increasing osteotomy site opening. The mean gap pressure, which occurred at a 14-mm opening, was 282±93 N; the maximum pressure was 427 N. The maximum pressure load of the allografts was 13,379±6,469 N (minimum, 5,868; maximum, 29,130 N) and was correlated significantly with the cortical bone thickness (correlation coefficient=0.693, p=0.002) and cross-sectional area (correlation coefficient=0.826, p<0.001). Depending on the sterilization method, the maximum pressure loads for the bone blocks were 13,406±5,928 N for freeze-dried and 13,348±7,449 N for fresh frozen. The maximum compressive load of the allogenous wedge bone blocks was 13.7-times greater than that in OWHTO opened to 14 mm (5,868 N vs. 427 N). Conclusion: The compressive strength of allogenous wedge bone blocks was sufficiently greater than the gap pressure in OWHTO. Therefore, allogenous wedge bone blocks can be inserted safely into the osteotomy site without a distractor.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.6
• /
• pp.557-564
• /
• 2000

The bone graft materials can be grossly divided into autogenous bone, allogenic bone, xenogenic bone, and alloplastic material. Much care was given to other bone graft materials away from autogenous bone due to its additional operation for harvesting, delayed resorption and limitation of quantity. Demineralized freeze-dried bone(DFDB) and hydroxyapatite are the representatives of bone graft materials. As resorbable hydroxyapatite is developed in these days, the disadvantage of nonresorbability can be overcome. So we planned to study on the strength and the bone formation at the rats calvarial defects of DFDB graft and those of the composite graft with DFDB and resorbable hydroxyapatite. We used the 16 male rats weighting range from 250 to 300 gram bred under the same environment during same period. After we made the 6mm diameter calvarial defect, we filled the DFDB in 8 rats and DFDB and resorbable hydroxyapatite in another 8 rats. We sacrificed them at the postoperative 1 month and 2 months with the periostium observed. As soon as the specimens were delivered, we measured the compressive forces to break the normal calvarial area and the newly formed bone in calvarial defect area using Instron(Model Autograph $S-2000^{(R)}$, Shimadzu, Japan). The rest of the specimens were stained with H&E(Hematoxylin & Eosin) and evaluated with the light microscope. So we got the following results. 1. In every rats, there was no significant difference between the measured forces of normal bone area and those of the bone graft area. 2. In 1 month, the measured forces at DFDB graft group were higher than those of the DFDB and resorbable hydroxyapatite composite graft group(P<0.05). 3. In 2 months, there was no significant differences between the measured forces of DFDB graft group and those of the DFDB and resorbable hydroxyapatite composite graft group. 4. In lightmicroscopic examination, most of the grafted DFDB were transformed into bone in 1 month and a large numbers of hydroxyapatite crystal were observed in DFDB and resorbable hydroxyapatite composite graft group in 1 month. 5. Both group showed no inflammatory reaction in 1 month. And hydroxyapatite crystals had a tight junction without soft tissue invagination when consolidated with newly formed bone. 6. In both groups, newly formed bone showed the partial bone remodeling and the lamellar bone structures and some of reversal lines were observed in 2 months. From the above results, it is suggested that DFDB and resorbable hydroxyapatite composite graft group had a better resistance to compressive force in early stage than DFDB graft group, but there would be no significant difference between two groups after some period. And it is suggested that the early stage of bone formation procedure of DFDB and resorbable hydroxyapatite composite graft group was slight slower than that of DFDB graft group, but there would be no significant difference between two groups after some period.