• 대한조선학회논문집
• /
• 제28권1호
• /
• pp.38-52
• /
• 1991

자유표면하에서 움직이는 임의의 형상의 3차원 물체로 인한 비선형 유체력을 준 Lagrangian 방법을 사용하여 해석하였다. 경계치 문제는 경계 적분 방법(Boundary Integral Method)을 이용하여 해결하였으며, 물체와 자유 표면의 형상은 곡면 Panel로 표현하였다. 이들 표면은 hi-cubic B-spline 방법을 사용하여 유한개의 작은 표면 요소로 나뉘어지게 되며, 또한 \phi와 (equation omitted) 표면 요소상에서 bi-linear하다고 가정한다. 특이점에 의한 유기 포텐시얼의 계산시 1/R에 비례하는 부분은 제거하고 해석적으로 처리하였다. 물체로부터 멀리 떨어진 곳에서의 유체 유통은 좌표계의 원점에 위치한 Dipole로 표현하였으며, Time Stepping시 Runge-Kutta의 4차 방법을 사용하였다. 3차원인 경우에 대한 적분 방정식과 포텐시얼의 시간 미분간에 대한 경계 조건이 유도되었으며, 이러한 식들을 사용하여 자유표면의 형상과 물체의 운동을 동시에 계산하였다. 대진폭을 가지고 규칙적으로 진동하는 물체에 작용하는 힘과 이때의 자유 표면 형상을 계산하고 기 발표된 자료와 비교하여 보았으며, 자유표면 근처에서 운동하는 물체에 작용하는 비선형 효과를 관찰하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.165-169
• /
• 2009

The effect of the Dirichlet boundary condition for the redistance equation of level set method on the solutionof sloshing problem is investigated by adopting four Dirichlet boundary conditions. For the solution of the incompressible Navier-Stokes equations, P1P1 four-step fractional finite element method is employed and a least-square finite element method is used for the solutions of the two hyperbolic type equations of level set method; advection and redistance equation. ALE (Arbitrary Lagrangian Eulerian) method is used to deal with a moving computational domain. It has been shown that the free surface motion in a sloshing tank is strongly dependent on the type of the Dirichlet boundary condition and the results of broken dam and sloshing problems using various Dirichlet boundary conditions are discussed and compared with the existing experimental results.

• Ocean Systems Engineering
• /
• 제1권4호
• /
• pp.355-372
• /
• 2011

Based on the fully nonlinear velocity potential theory, the liquid sloshing in a three dimensional tank under random excitation is studied. The governing Laplace equation with fully nonlinear boundary conditions on the moving free surface is solved using the indirect desingularized boundary integral equation method (DBIEM). The fourth-order predictor-corrector Adams-Bashforth-Moulton scheme (ABM4) and mixed Eulerian-Lagrangian (MEL) method are used for the time-stepping integration of the free surface boundary conditions. A smoothing scheme, B-spline curve, is applied to both the longitudinal and transverse directions of the tank to eliminate the possible saw-tooth instabilities. When the tank is undergoing one dimensional regular motion of small amplitude, the calculated results are found to be in very good agreement with linear analytical solution. In the simulation, the normal standing waves, travelling waves and bores are observed. The extensive calculation has been made for the tank undergoing specified random oscillation. The nonlinear effect of random sloshing wave is studied and the effect of peak frequency used for the generation of random oscillation is investigated. It is found that, even as the peak value of spectrum for oscillation becomes smaller, the maximum wave elevation on the side wall becomes bigger when the peak frequency is closer to the natural frequency.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권2호
• /
• pp.122-125
• /
• 2011

In this work, the movement pattern of a floating breakwater is numerically analyzed using Smoothed Particle Hydrodynamic (SPH) method as a Lagrangian scheme. At the seaside, the regular incident waves with varying height and period were considered as the dynamic free surface boundary conditions. The smooth and impermeable beach slope was defined as the bottom boundary condition. The effects of various boundary conditions such as incident wave characteristics, beach slope, and water depth on the movement of the floating body were studied. The numerical results are in good agreement with the available experimental data in the literature The results of the movement of the floating body were used to determine the transmitted wave height at the corresponding boundary conditions.

• Journal of Advanced Research in Ocean Engineering
• /
• 제4권4호
• /
• pp.163-173
• /
• 2018

There are many issues in fluid structure interactions when dealing with the free surface flows in a sloshing tank. For example the problem of how yielding a highly nonlinear wave with a simple forced motion over a short duration is of concern here. Nonlinear waves are generated in a rectangular tank which is forced horizontally; its motion consists of a single cycle of oscillation. One of the objectives is to end up with a shape of the free surface yielding a wide range of critical flows by tuning few parameters. The configuration that is studied here concerns a plunging breaker accompanied with a critical jet where great kinematics are simulated. The numerical simulations are performed with a twodimensional code which solves the fully nonlinear free surface boundary conditions in Potential Theory.

• 지구물리와물리탐사
• /
• 제6권2호
• /
• pp.77-86
• /
• 2003

자유면 경계조건을 정착하게 묘사할 수 있는 변위근사 유한차분법을 이용하는 시간영역 탄성파 모델링법을 고안하였다. 기존의 변위근사 유한차분법의 경우 변위와 매질의 물성을 격자점에 정의하는 격자군(격자점 기반의 격자군)을 이용하였으나, 이 연구에서 제시하는 새로운 유한차분법에서는 변위는 격자점에 정의하지만 매질의 물성을 격자점으로 둘러싸인 면에 정의하는 격자군(셀 기반의 격자군)을 이용한다. 매질의 물성을 셀에 정의할 경우 자유면에서 응력이 사라진다는 자유면 경계조건을 추가로 적용할 필요가 없으며 매질의 물성 변화만으로 자유면 경계조건을 표현할 수 있다. 수치예를 통한 정확도 분석 결과 셀 기반의 격자군을 이용할 경우 계산된 수치석인 해가 해석적인 해에 매우 근사함을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제47권5호
• /
• pp.599-622
• /
• 2013

Seismic response of two dimensional liquid tanks is numerically simulated using fully nonlinear velocity potential theory. Galerkin-weighted-residual based finite element method is used for solving the governing Laplace equation with fully nonlinear free surface boundary conditions and also for velocity recovery. Based on mixed Eulerian-Lagrangian (MEL) method, fourth order explicit Runge-Kutta scheme is used for time integration of free surface boundary conditions. A cubic-spline fitted regridding technique is used at every time step to eliminate possible numerical instabilities on account of Lagrangian node induced mesh distortion. An artificial surface damping term is used which mimics the viscosity induced damping and brings in numerical stability. Four earthquake motions have been suitably selected to study the effect of frequency content on the dynamic response of tank-liquid system. The nonlinear seismic response vis-a-vis linear response of rectangular liquid tank has been studied. The impulsive and convective components of hydrodynamic forces, e.g., base shear, overturning base moment and pressure distribution on tank-wall are quantified. It is observed that the convective response of tank-liquid system is very much sensitive to the frequency content of the ground motion. Such sensitivity is more pronounced in shallow tanks.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.25-32
• /
• 2002

Free vibration analysis of radialiy multi-delaminated beams with through-the-width multi-delamination is performed in the present study. The multiple delaminations are considered to be in a radial manner through the thickness from the top surface of the beam. The natural frequencies of the radially multi-delaminated beams are calculated from a new algorithm that is based on the single compound delaminated beam model. That is, beams with radial multi-delaminations are regarded as the sum of a single compound delamlnated beam that is the single sub-delaminated beam from the top surface of global beam. Each result of frequency equation for the single delaminated beam with unknown boundary conditions obtained through continuity conditions Is updated to the next one, With these sequential operations, the final frequency equation of radially multi-delaminated beams is obtained for both ends boundary conditions of global beam. The numerical results carried out for the beams are compared with those of some references to give the reliance on the proposed algorithm and to investigate the effects of the shape, number, size of multi-delaminations on the natural frequency. Compared with the other previously presented model, the proposed algorithm is more flexible in modeling and formulating as the total array size of frequency equation is always four by four. Therefore, the proposed algorithm will reduce the effort of user in formulating the physical model to the numerical model.

• 한국해안·해양공학회논문집
• /
• 제35권2호
• /
• pp.41-48
• /
• 2023

본 연구에서는 바닥의 움직임에 따른 파랑의 생성 및 변화를 모의할 수 있는 간단한 선형 수치해석 기법을 소개한다. 연속방정식과 선형의 동역학적 및 운동학적 자유수면 경계조건, 선형의 운동학적 바닥 경계조건을 공간에 대해 푸리에 변환한 후 파수 영역에서 수치해석을 수행하며, 결과는 푸리에 역변환을 통해 공간영역에서 표현된다. 파수 영역에서 동역학적 자유수면 경계조건과 운동학적 자유수면 경계조건이 수치적으로 계산되며, 이 때 평균수면 (z = 0)에서의 속도포텐셜은 연속방정식과 운동학적 바닥 경계조건을 만족한다. 삼각형 및 사각형 형상의 바닥이 주기적으로 움직이는 경우의 파랑 생성 및 전파에 대해 검토하였다. 간편 수치해석 기법을 이용한 결과는 기존의 선형 해석해와 비교하였으며, 거의 일치하는 결과를 보였다. 계산 시간간격(Δt)과 계산 파수간격(Δk)에 따른 수치해석 결과의 안정성에 대해서도 검토하였다. 검토 결과 Δt ≤T(주기)/1000, Δk ≤ π/100 일 때 수치해석에 의한 결과가 적절하게 도출되는 것으로 나타났다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.315-320
• /
• 2009

A computational investigation is conducted on free convection from a thin plate having a surface heat source. The thermal configuration simulates the recently-proposed transparent film heater made of a single-walled carbon nanotube film on a glass substrate. The Navier-Stokes computations are carried out to study laminar free convection from the heater. Parallel numerical experiments are performed by using a simplified design analysis model which solve the conduction equation with the boundary conditions utilizing several existing correlations for convective heat transfer coefficient. Comparison leads to the most suitable boundary condition for the thermal model to evaluate the performance evaluation of a transparent thin-film heater.