• 대한조선학회논문집
• /
• 제45권1호
• /
• pp.54-62
• /
• 2008

A new solution method was developed to solve the free surface flow around a hull and named as 'Variable Free Surface Panel Method'. In the method the non-linearity of the free surface boundary conditions was fully taken into account and the raised panel method was employed to effectively solve the problem. The transom stern flow was also considered and the panel on the hull was generated using the panel cutting method. Numerical calculations were performed for KCS(KRISO Container Ship) hull form and compared with the experimental data to confirm the validity of the method. The comparison with the conventional free surface panel method was also accomplished. It is confirmed that new method gives more reliable results than the conventional method.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.53-59
• /
• 2001

In this Paper, the resistance performances of twin hull forms, which are simplified as two-dimensional wedge shape, are experimentally investigated in low and middle speed ranges to find out the effect of distance between two hulls and fore-body shape for the future hull form development of catamaran type sweeping vessel. The model tests are performed for seven different cases for three models in the circulating water channel(CWC) of Inha Technical College. The free surface flows are observed together to investigate the relation between resistance performance and free surface characteristics. A conceptual design for the modification of bow hull form is presented and the efficiency is discussed.

• 대한조선학회지
• /
• 제11권1호
• /
• pp.1-8
• /
• 1974

Hydrodynamic forces and moments produced by the swaying oscillation on the free surface were exactly calculated by Ursell-Tasai method for the cylinders with Kim's chine form sections and the sway responses of the cylinders of those chine form sections among the regular beam sea were also calculated. The results of the computation were compared with those of Lewis form sections. It is concluded that the effects of the section form on the added mass, and damping are small, if the section forms had same beam-draft ratio and sectional area coefficient in the case of sway motion. It is also known that the above little effects of section shapes on the basic hydrodynamic forces do not effect on the sway motion responses of cylinderical bodies among the regular beam sea. The sway motion responses of cylinderical bodies are varied linearly with the wave numbers.

• 한국정밀공학회지
• /
• 제31권7호
• /
• pp.605-613
• /
• 2014

Scanning white-light interferometry is an important measurement option for many surfaces. However, serious profile measurement errors can be present when measuring free-form surfaces being highly curved or tilted. When the object surface slope is not zero, the object and reference rays are no longer common path and optical aberrations impact the measurement. Aberrations mainly occur at the beam splitter in the interference objective and from misalignment in the optical system. Both effects distort the white-light interference signal when the surface slope is not zero. In this paper, we describe a modified version of white-light interferometry for eliminating these measurement errors and improving the accuracy of white-light interferometry. Moreover, we report systematic errors that are caused by optical aberrations when the object is not flat, and compare our proposed method with the conventional processing algorithm using the random ball test.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.809-814
• /
• 2011

A method based on the TMS derivatives and acidic hydrolysis was developed for the simultaneous determination of free and conjugated steroidal hormones in surface water. A silylation of five natural and two synthetic steroidal hormones was achieved with N-methyl-N-(trimethylsilyl) trifluoroacetamide/$NH_4I$ (1000:3) under catalysis of dithioerythritol for 60 min at $80^{\circ}C$. TMS derivatives of the steroid hormones containing multifunctional groups offer a single derivative product under this condition. The accuracy of the analytes was in the range of 87 to 110% at a concentration of 20 and 50 ng/L with relative standard deviations of less than 10%. The method detection limit was in the range of 0.01 to 0.02 ng/L for surface water. Natural steroidal hormones were detected in a concentration range of 0 to 1.03 ng/L in free form and 0 to 14.6 ng/L in conjugated form, respectively. We found that most of the natural hormonal steroids exist in conjugate forms (43 to 100%) in river water.

• 대한조선학회논문집
• /
• 제29권3호
• /
• pp.1-14
• /
• 1992

본 논문에서는 형상의 기하학적 특성을 나타내는 형상계수들로부터 B-spline 곡면식으로 표현 되는 3차원 자유곡면의 생성을 시도하고 있다. 이것은 형상계수들의 결정과 이들 형상계수들의 Coons 곡면 및 B-spline 곡면과의 결합으로 이루어진다. 본 방법의 유용성 확인을 위해서 구상선수 형상에 유사한 곡면의 생성을 시도해 보았다.

• 한국전산유체공학회지
• /
• 제19권1호
• /
• pp.15-20
• /
• 2014

Accurate simulation of free-surface wave flows around a ship is very important for better hull-form design. In this paper, a computational fluid dynamics (CFD) code, termed SNUFOAM, which is based on the open source libraries, OpenFOAM, was developed to predict the wave patterns around a ship. Additional anti-diffusion source term for minimizing a numerical diffusion, which was caused by convection differencing scheme, was considered in the volume-fraction transport equation. The influence of the anti-diffusion source term was tested by applying it to free-surface wave flow around the Wigley model ship. In results, the band width of the volume fraction contours between 0.1 to 0.9 at the hull surface was narrowed by considering the anti-diffusion term.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.922-925
• /
• 2002

Klystron which is micro wave amplifier tube are mainly used in fields of science such as accelerator, nuclear fusion, broadcasting, communication fields, and defense industry fields, tract. The quality of Klystron anode and cavity are determined by form accuracy and roughness of the worked surface. Therefore anode and cavity are restricted the from accuracy strictly and the surface roughness be under Rmax 0.03S. As a work material of anode and cavity, the oxygen-free copper, that is used for optical pares of aerospace and laser mirror is selected. An outside diameter of material is $\Phi$100 mm and an inside diameter is $\Phi$30~33 mm. In this study, to find the optimum ultra precision cuffing condition of oxygen-free copper with diamond turning machine, the surface roughness is examined for various diamond toot nose radius, main spindle speed, fred rate and depth of cut. As a result of experiment, we could machined the anode and cavity with a surface roughness within Ra 3.2 nm, a form accuracy within 0.01 $\mu\textrm{m}$.

• 대한조선학회논문집
• /
• 제29권3호
• /
• pp.15-20
• /
• 1992

이 논문에서는 화가의(Painter's) 알고리듬을 사용하여 3차원 자유형상곡면(Three dimensional free form surface)을 가시화하는 방법을 개발하였고, 특히 선체형상은 Open 균일 B-Spline 곡면으로 정의하였다. 컴퓨터그래픽스를 응용하여 와이어프레임, 숨은면제거, 묘영등의 가시화를 위한 프로그램을 완성하였다. 또한 선체곡면의 순정을 검토하기 위해 Gaussian 곡률값을 15등급으로 구분하여 등급별 색(color)처리 하였다.

• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.333-340
• /
• 2018

최근 비정형 건축구조물은 건설 산업의 디지털화로 인해 점점 더 복잡한 형상으로 디자인되고 있다. 특히, 외관 및 내부 구성요소들의 단면이 자유롭게 변화되는 곡선 및 곡면의 형태를 띠고 있으며, 그로 인해 곡률을 가진 구조부재들이 빈번히 나타나고 있다. 이러한 구조물의 모형을 작성하고 안정성을 평가를 하는데 있어, 고전적 방식의 유한요소 해석기법이 적용된 상용프로그램들은 신속한 형상 모델링이 불가능하여 생산성 저하를 초래하고 있다. 따라서 본 연구에서는 선행연구를 통해 개발된 구조해석 통합시스템을 확장하여 비정형 외피 형상을 신속하게 모델링하고, 그 결과물을 이용하여 외피를 구성하는 프레임 구조를 자동으로 생성할 수 있는 전후처리 모듈을 개발하였다. 본 연구에서 개발된 전후처리 모듈은 스플라인 곡선 및 곡면의 세분화 알고리즘을 적용하여 NURBS곡면의 형상정보를 통해 해석요소를 자동으로 생성하고, 해석 후의 변형 형상을 보다 현실적으로 가시화 시킬 수 있도록 개발되었다. 본 연구를 통해 개발된 전후처리 모듈은 복잡한 곡면 형상을 신속하게 구축하고, 그에 따른 하부 골조시스템의 해석모형을 자동으로 생성할 수 있어 향후 비정형 건축물 설계의 생산성 향상에 기여할 수 있을 것으로 판단된다.