• 한국강구조학회 논문집
• /
• 제28권5호
• /
• pp.365-371
• /
• 2016

두 개의 I형 거더로 이루어진 소수주형 교량의 경우, 합성 후 슬라브와 거더가 하나의 단면으로 인식될 수 있으며, 이에 따라 평면 외방향의 휨에 대한 중립축은 강축으로 간주 될 수 있다. 따라서 자유진동 모드에서는 평면 내의 휨거동이 지배적일 것이라 쉽게 예상할 수 있다. 그러나 곡선 교량은 직선교량과 달리 초기곡률로 인하여 중력하중 하에서도 항시 비틀림 모멘트가 작용한다. 휨과 비틀림의 상호 작용은 거더의 거동을 복잡하게 하며, 때에 따라서는 비틀림 모드가 휨모드보다 지배적으로 작용할 수 있게 된다. 다시 말해, 같은 환경 하에서 곡선교량은 초기 곡률에 따라 동특성이 달라질 수 있게 된다. 현재까지 수평 곡선 거더의 자유진동에 관한 연구는 많이 이루어져 왔으나 합성 거더에 대한 연구는 부족한 실정이다. 본 연구에서는 곡률 중심각의 변화에 따른 모드 변화와 고유 주파수의 변화를 3차원 모델링을 통하여 검증 하였다. 해석 모델은 합성 전후에 대하여 작성 되었으며, 고유 주파수와 진동 모드 변화를 고찰하였다.

• Structural Engineering and Mechanics
• /
• 제57권3호
• /
• pp.543-567
• /
• 2016

This study attempts to address the buckling and free vibration characteristics of an isotropic cylindrical panel subjected to non-uniform temperature rise using numerical approach. Finite element analysis has been used in the present study. The approach involves three parts, in the first part non-uniform temperature field is obtained using heat transfer analysis, in the second part, the stress field is computed under the thermal load using static condition and, the last part, the buckling and pre-stressed modal analysis are carried out to compute critical buckling temperature as well as natural frequencies and associated mode shapes. In the present study, the effect of non-uniform temperature field, heat sink temperatures and in-plane boundary constraints are considered. The relation between buckling temperature under uniform and non-uniform temperature fields has been established. Results revealed that decrease (Case (ii)) type temperature variation field influences the fundamental buckling mode shape significantly. Further, it is observed that natural frequencies under free vibration state, decreases as temperature increases. However, the reduction is significantly higher for the lowest natural frequency. It is also found that, with an increase in temperature, nodal and anti-nodal positions of free vibration mode shapes is shifting towards the location where the intensity of the heat source is high and structural stiffness is low.

• Structural Engineering and Mechanics
• /
• 제77권4호
• /
• pp.535-547
• /
• 2021

This paper concerns with free torsional vibration analysis of size dependent circular nanobars with von kármán type nonlinearity. Although review of the literature suggests several studies employing nonlocal elasticity theory to investigate linear torsional behavior, linear/nonlinear transverse vibration and buckling of the nanoscale structures, so far, no study on the nonlinear torsional behavior of the nanobars, considering the size effect, has been reported. This study employs nonlocal elasticity theory along with a variational approach to derive nonlinear equation of motion of the nanobar. Then, the nonlinear equation is solved using the elliptic functions to extract the natural frequencies of the structure under fixed-fixed and fixed-free end conditions. Finally, the natural frequencies of the nanobar under different nanobar lengths, diameters, nonlocal parameters, and amplitudes of vibration are reported to illustrate the effect of these parameters on the vibration characteristics of the nanobars. In addition, the phase plane diagrams of the nanobar for various cases are reported.

• 한국안전학회지
• /
• 제17권1호
• /
• pp.99-104
• /
• 2002

아크축(arch axis)의 연장(extensibility) 및 회전관성(rotatory inertia)을 고려한 곡선보(curved beam)의 평면내(in-plane) 자유진동을 미분구적법(DQM)을 이용하여 다양한 경계조건(boundary conditions)과 굽힘각(opening angles)에 따른 진동수(frequencies)를 계산하였다. DQM의 결과를 다른 수치해석결과와 비교하였으며, DQM은 적은 요소(grid points)을 사용하여 정확한 해석결과를 보여주었다.

• Steel and Composite Structures
• /
• 제10권4호
• /
• pp.297-315
• /
• 2010

This paper is concerned with free vibration characteristics and natural frequency of horizontally curved composite plate girder bridges. Three-dimensional finite element models are developed for the girders using the software package LUSAS and analyses carried out on the models. The validity of the finite element models is first established through comparison with the corresponding results published by other researchers. Studies are then carried out to investigate the effects of total number of girders, number of cross-frames and curvature on the free vibration response of horizontally curved composite plate girder bridges. The results confirm the fact that bending modes are always coupled with torsional modes for horizontally curved bridge girder systems. The results show that the first bending mode is influenced by composite action between the concrete deck and steel beam at low subtended angle but, on the girders with larger subtended angle at the centre of curvature such influence is non-existence. The increase in the number of girders results in higher natural frequency but at a decreasing rate. The in-plane modes viz. longitudinal and arching modes are significantly influenced by composite action and number of girders. If no composite action is taken into account the number of girders has no significant effect for the in-plane modes.

• Smart Structures and Systems
• /
• 제16권4호
• /
• pp.579-591
• /
• 2015

This paper investigates a magnetoelectric (ME) vibration energy harvester that can scavenge energy in arbitrary directions in a plane as well as wide working bandwidth. In this harvester, a circular cross-section cantilever rod is adopted to extract the external vibration energy due to the capability of it's free end oscillating in arbitrary in-plane directions. And permanent magnets are fixed to the free end of the cantilever rod, causing it to experience a non-linear force as it moves with respect to stationary ME transducers and magnets. The magnetically coupled cantilever rod exhibits a nonlinear and two-mode motion, and responds to vibration over a much broader frequency range than a standard cantilever. The effects of the magnetic field distribution and the magnetic force on the harvester's voltage response are investigated with the aim to obtain the optimal vibration energy harvesting performances. A prototype harvester was fabricated and experimentally tested, and the experimental results verified that the harvester can extract energy from arbitrary in-plane directions, and had maximum bandwidth of 5.5 Hz, and output power of 0.13 mW at an acceleration of 0.6 g (with $g=9.8ms^{-2}$).

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권5호
• /
• pp.29-38
• /
• 1992

This paper describes the general formulation for the in-plane longitudinal and flexural coupled free vibration analysis of a branched structure. The branched structure, which is mainly found in machine tools, pipeline systems and so on, has some crooked parts and subsystems. And it modeled as a distributed mass system. The superiority of the present method to the transfer matrix method in the computation accuracy and speed was confirmed by the numerical computation results. Moreover, we comfirmed that boundary and intermediate conditions have been controlled by the spring constants.

• 한국소음진동공학회논문집
• /
• 제12권1호
• /
• pp.82-88
• /
• 2002

This paper deals with the free vibrations of horizontally curved beams with transition curve. Based on the dynamic equilibrium equations of a curved beam element subjected to the stress resultants and inertia forces, the governing differential equations are derived for the out-of-plane vibration of curved beam wish variable curvature. This equations are applied to the beam having transition curve in which the third parabolic curve is chosen in this study. The differential equations are solved by the numerical procedures for calculating the natural frequencies. As the numerical results, the various parametric studies effecting on natural frequencies are investigated and its results are presented in tables and figures. Also the laboratory scaled experiments were conducted for verifying the theories developed herein.

• 한국소음진동공학회논문집
• /
• 제18권2호
• /
• pp.215-223
• /
• 2008

The differential equations governing free vibrations of the elastic arches with hollow section are derived in polar coordinates, in which the effect of rotatory inertia is included. Natural frequencies is computed numerically for parabolic arches with both clamped ends and both hinged ends. Comparisons of natural frequencies between this study and reference are made to validate theories and numerical methods developed herein. The lowest four natural frequency parameters are reported, with the rotatory inertia, as functions of three non-dimensional system parameters: the breadth ratio, the thickness ratio and the rise to span length ratio.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.651-656
• /
• 2004

This paper presents the application of Differential Transformation to the bucking load and the vibration problem of the rectangular plate loaded by varying in-plane stress. Numerical calculations are carried out and compared with previously published results to validate the results of the resent method. The results obtained by this method agree well with those reported in the Devious works. The results obtained by the present method are presented for various non-uniform loads.